Engineer, Capacity Planning

ASC Harbor Pilot

ASC - Portfolio Evaluations Geoscientist - UR Assessment & Data Solution

ASC - Reservoir Geologist

Harbor Pilot

Maintenance Planner

Process Engineer

Development Geologist

Exploration Geoscientist

Responsibilities:Apply advanced engineering knowledge and experience to develop, implement, and improve methods, time standards, capacity planning, sequence of operation, data analysis, and production line layouts in SAW and BAW filter manufacturing for front-end and back-end operationsImplement and fan-out standard factory planning models, methods, and tools.Ensure the effectiveness of techniques usedOptimize the use of production facilities, equipment layout, workflow, space utilization, production layout, office layout, plant expansion and relocation activities.Global Equipment Strategy (GES) equipment assessment and review.Evaluate, recommend, and implement a wide range of complex equipment, tools, and fixtures. Contribute to equipment selection. Follow up to ensure that the procurement of new equipment is in line with GES strategy and long-term equipment requirements.Contribute to the Global Manufacturing Strategy (GMS) to facilitate the review of technology and site selection strategies and business continuity plans, decisions, and execution.Effectively execute capacity ramp-up/downs and production site transfers based on business needs and strategic long-term goals. Support capital projects through job sampling, cost justification, and cost/benefit analysis.Track capital expenditures across the plant to ensure spendings are within budget. Follow up to ensure that project expenditure milestones/targets, and approved budgets are met.Requirements:Minimum Qualifications:Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field.Preferred Qualifications:Degree and above in any Engineering disciplines.At least 4 years of experience in manufacturing engineering, industrial engineering or operations research in the semiconductor or electronics industry.Strong organizational, leadership, communication, and interpersonal skills.Ability to work under pressure and have a strong commitment at work.​

Responsibilities:You will be required to perform the following:Make safety inspections of all vessels prior to berthing or loading.Direct deep loaded vessels to a safe anchorage and lines up same for the departure channel upon ship's Master request.Investigate ship/pier related oil pollution incidents and prepares reports.Maintain permanent official log of vessels handled.Develops and maintains record of selected characteristics of all vessels handled.Maintain radio communications with vessels in the operating area; advises vessels of ballast condition required, berthing and unberthing time and other information to expedite ship movement and help with optimum scheduling.Perform other miscellaneous duties as directed by Senior Harbor Pilot Supervision.Give direct commands regarding steering orders, engine speed and use of anchors; directs tugs and/or mooring launches via radio assigned to berthing/unberthing operation.Direct Pier personnel or mooring launches in the order and sequence of putting out and taking in mooring lines.Requirements:As the successful candidate you will hold a Bachelor’s of Science degree from a recognized and approved Maritime Studies College and have five-year experience, including at least four in Harbor Pilot or seagoing experience.Or you will hold High National Diploma from a recognized and approved Maritime Studies College and have six years’ experience, including at least four in Harbor Pilot or seagoing experience.You will have for Maritime Studies discipline is required for HND & Bachelor graduates.You must have Tanker Safety Course-Basic training in Oil/Chem/Gas.Helicopter and Underwater Escape Training Course is also necessary.

Responsibilities:Near field and wildcat exploration mapping and prospect generation throughout the Basins of Saudi Arabia.Well log interpretation and correlations using basic logs.Use of advanced log interpretations where available.Work effectively with petrophysical colleagues.Participate in reflection seismic data survey planning, 2D and 3D.Execute reflection seismic data interpretation 2D and 3D incorporating multiple surveys and vintages, onshore and marine, generating attributes as required. Well ties using synthetics and VSP.Interpret seismic, including seismic stratigraphic interpretations for subtle traps. Apply sequence stratigraphic techniques to identify subtle traps. Structural geology skills including fault interpretation and fault seal. Integrate diverse data-types to construct and promote prospects. Assess petroleum risk elements to identify viable prospects.Map making using industry standard tools.Prospect volume and risk estimates.Preparing and presenting professional-quality presentation materials to technical peers and management. Provide mentoring and technical assistance to young professionals.Requirements:Minimum of fifteen years of experience in subsurface exploration and a proven track record in prospect generation and maturation skills including broad international experience.Extensive experience in applying Clastic and Carbonate Sequence and Seismic Stratigraphy & Regional Geology using seismic and well data to analyze the subsurface at all scales relevant to petroleum systems, from the basin evolution, to the identification of stratigraphic traps and the timing of structural trap development, gross depositional environment reconstruction, reservoir potential, seal characterization and structural geology.Extensive experience in using applications relating to data interpretation, correlations, mapping and prospect generation e.g., Petrel, Petrosys.

ResponsibilitiesConduct reservoir characterization studies, including Log-to-core integration, mapping, sequence stratigraphy and conceptual 3D geological modeling (Facies and reservoir properties).Contribute to field development plans through well planning using simulation ready 3D integrated model.Perform well planning, including creating well targets data with reservoir and drilling engineers, generating well trajectories and loading the directional data, preparing geological prognosis (including but not limited to tops, cross sections and correlation panels) along with monitor operational and geo-steering activities for all types of wells (horizontal, deviated, and vertical) in the office or offsite if needed, including monitoring, geo-steering and tracking wells, performing well evaluations while and post drilling, making well correlations, generating and/or updating maps for structural, stratigraphic and fluid limits in light of the new drilling information, and making critical decisions for wellbore adjustments.Interact with concerned geoscientists in the Reservoir Characterization Department, Reservoir Engineers, and Drilling & Workover Engineers and communicate clearly with all parties involved in drilling activities, and prepare post-drilling analysis.Requirements As a successful candidate you will hold a Bachelor’s degree in Geology from a recognized and approved program, an advanced degree is preferred.You will have 15  years of experience in Field development activities or role of development geologist.You will have the ability to integrate all available Geological, Geophysical, Petrophysical, Sedimentological, and 3D Geological model and other dynamic information for advance reservoir characterization studies to in-depth understanding for reservoir architecture and flow behavior.You will also have the ability to integrate all characterization studies to identify suitable locations for drilling.Extensive experience in subsurface mapping and be familiar of utilization of various geological applications and packages (such as DSG, Petrel, Petrosys, Geolog, Teclog etc.) is also necessary.Also, a minimum of two years’ experience in geo-steering (with triple combo log) and real-time operations is preferred.You need to be familiar with LWD and/or wireline borehole image interpretation and also with rig operations and vendor logging systems.Previous experience in reservoir geology, drilling operations, field development, sedimentology/stratigraphy or structural geology is necessary

Responsibilities:You will be required to perform the following:Make safety inspections of all vessels prior to berthing or loading.Direct deep loaded vessels to a safe anchorage and lines up same for the departure channel upon ship's Master request.Investigate ship/pier related oil pollution incidents and prepares reports.Maintain permanent official log of vessels handled. Develops and maintains record of selected characteristics of all vessels handled.Maintain radio communications with vessels in the operating area; advises vessels of ballast condition required, berthing and unberthing time and other information to expedite ship movement and help with optimum scheduling.Perform other miscellaneous duties as directed by Senior Harbor Pilot Supervision.Give direct commands regarding steering orders, engine speed and use of anchors; directs tugs and/or mooring launches via radio assigned to berthing/unberthing operation.Direct Pier personnel or mooring launches in the order and sequence of putting out and taking in mooring lines.Requirements:As the successful candidate you will hold a Bachelor’s of Science degree from a recognized and approved Maritime Studies College and have five-year experience, including at least four in [Harbor Pilot or seagoing experience.Or you will hold High National Diploma from a recognized and approved Maritime Studies College and have six years’ experience, including at least four in Harbor Pilot or seagoing experience.You will have for Maritime Studies discipline is required for HND & Bachelor graduates.you must have Tanker Safety Course-Basic training in Oil/Chem/Gas.Helicopter and Underwater Escape Training Course is also necessary.

Responsibilities:Use your knowledge in various SAP transactions to perform regular planner duty that includes, but is not limited to, opening/initiating internal orders, notifications, maintenance work-orders, planning the activities with required resources, ordering the materials, and track all maintenance activities within your respective area.Plan for equipment isolation and safety precautions and estimate job step craft man-hour requirements.Prepare weekly and daily schedules by reviewing backlog and coordinating work requirements to comply with operation rankings.ensure availability of all resources required are met and available, prior to scheduling work, and obtain approval of the schedule updates maintenance order statuses & follows up until completion of orders.Monitor the progress of the maintenance on a daily basis and give feedback to maintenance supervisor and supporting the execution team.Ensure the history is updated and technically completed on all works orders prior to closing them.Ensure onsite availability of all materials, manpower and service requirements.Process the return of all support equipment and machines (i.e. crane, forklift, air compressor, flood glitch, etc.)Daily contact/coordination with concerned parties that includes Operations Foremen, Maintenance Supervisors and personnel to clarify work scopes on Maintenance Work Orders, required resources, status update, and the path forward.Prepare detailed job step plans in proper execution sequence, with details of craft man-hour and crew size requirements for each step.Requirements:﻿You must have a minimum of 10 years’ experience in industrial maintenance planning.You must have high school certification. However, a Bachelor Degree in Engineering is preferred.You should have the ability to identify all materials, services, equipment’s, and special preparations required for each maintenance job.Knowledge of SAP is a must.Knowledge of MS Office is also required.

Responsibilities:Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix process equipmentDevelop the engineering designs packages for the new installation and upgrade projectsReview Project Proposals and Detailed Designs packages for new facilitiesParticipate on the testing & commissioning of the new facilities and Turnaround and Inspection (T&I)Update and maintain engineering documentation and drawingsAnalyze system performance and find solution for Energy savingEnsure quality, cost effective and timely solutions to any upgradeTest and pilot new technologiesEnsure full HSE ComplianceReport and analyze key performance indicesMake recommendations for technical/economic optimization of existing facilitiesLead feasibility/profitability studies for new facilitiesContribute to Business Unit strategyAssist in the training, development and mentoring of younger staff.Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to  capital investment decisions.Maintain and expands on contacts within the industry.Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.Requirements:As the successful candidate you a Bachelor's Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.You will have at least 15 years of working experience including 10 years of experience in the industrial operation facility, Shale gas facility is preferred. Also, has a good knowledge of the Modular skids mounted process unit.Detailed knowledge of industry standards and procedures such as API and ASMI codes is required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.Experience with creating/modifying PFDs, and P&IDsExperience with troubleshooting process equipment and systems failures, including pumps, compressors, pipe line/piping, and dehydration systems.Knowledge of HYSIS and other process simulation softwareExperience in creating schematics and piping diagramsConduct failure analysis and provide recommendations for failed process system, sequence of event reportingExperience with process equipment and systems field Installation, Commissioning and testingExperience in specifying piping and equipment layoutHas good experience in dealing with corrosion related issuesCapable of communicating with multidiscipline engineers to complete projectsProven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organizationStrong written and oral communication skills. Able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.Hands-on person who will immediately command the professional respect of others who possess long-time practical experience of working in or serving the industry. Person whom others, at all levels, will seek out for advice and counsel.Able to work effectively with the minimum of supervision on relatively unstructured tasks.

Role Description:The Unconventional Resource (UR) Operations Dept is responsible for operating all the surface facilities which include the field wells and processing facilities. Their role will be to operate the well manifolds, provide field services, maintain the facility and reduce the equipment down time, perform the PM activities, provide maintenance services in addition of providing all the technical engineering and inspection activities. Additional manpower is now required to meet the significant increase in operation activity.They are looking to appoint a Process Engineer to lead the process design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities. The candidate will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, the incumbent will have a detailed understanding of product properties, customer applications and requirementsThe Process Engineer must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisionsResponsibilities:Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix process equipmentDevelop the engineering designs packages for the new installation and upgrade projectsReview Project Proposals and Detailed Designs packages for new facilitiesParticipate on the testing & commissioning of the new facilities and Turnaround and Inspection (T&I)Update and maintain engineering documentation and drawingsAnalyze system performance and find solution for Energy savingEnsure quality, cost effective and timely solutions to any upgradeMake recommendations for technical/economic optimization of existing facilitiesLead feasibility/profitability studies for new facilitiesAssists in the training, development and mentoring of younger staff.Provides analysis, evaluation and interpretation in support of projects, processes, and financing related to their capital investment decisions.Maintains and expands on contacts within the industry.Regularly interacts with other professionals in various company organizations involved in capital planning and economic analysis.Requirements:Bachelor's Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essentialMinimum 15 years of working experience including knowledge in the industrial operation facility, Shale gas facility is preferred.Also, has a good knowledge of the Modular skids mounted process unit.Detailed knowledge of industry standards and procedures such as API and ASMI codes is required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.Experience with creating/modifying PFDs, and P&IDsExperience with troubleshooting process equipment and systems failures, including pumps, compressors, pipe line/piping, and dehydration systems.Knowledge of HYSIS and other process simulation softwareExperience in creating schematics and piping diagramsConduct failure analysis and provide recommendations for failed process system, sequence of event reportingExperience with process equipment and systems field Installation, Commissioning and testingExperience in specifying piping and equipment layout

Skills

Industry

Location

Jobtitle

12 sequence stratigraphy Jobs found

Engineer, Capacity Planning

ASC Harbor Pilot

ASC - Portfolio Evaluations Geoscientist - UR Assessment & Data Solution

ASC - Reservoir Geologist

Harbor Pilot

Maintenance Planner

Process Engineer

Process Engineer

Development Geologist

Exploration Geoscientist

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

12 sequence stratigraphy Jobs found

Engineer, Capacity Planning

ASC Harbor Pilot

ASC - Portfolio Evaluations Geoscientist - UR Assessment & Data Solution

ASC - Reservoir Geologist

Harbor Pilot

Maintenance Planner

Process Engineer

Process Engineer

Development Geologist

Exploration Geoscientist

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.