EHS Manager

Sr. Business Development Manager (Vietnam Market)

Upstream Flow Supply Chain Analyst

CNC Machinist IV

Test Laboratory Engineer

Sales Manager – ILCV (Intermediate & Light Commercial Vehicle 10 to 18 tonner)

Sales Manager – HCV

Logistics Supervisor

Supply Chain Manager

Technical Support Manager

Responsibilities: <ul><li>Reports to EHS site Manager and Construction Project Manager all EHS related issues, concerns, improvements with a goal on achieving leading indicators and ZERO Recordable Incident Rate. </li><li>Ensure EHS compliance to all legal and other requirements associated with regulatory, local and other requirements.</li><li>Facilitates risk assessment to identify critical safety or health hazards and environmental aspects per company standard/spec and local regulatory standards.</li><li>Works with Project Management Team and Contractor’s leadership team to create targets and objectives based on key EHS risks.</li><li>Verify the EHS plan from Project Management company (PM), and work with PM to validate EHS plan from general contractor (GC).</li><li>Manages and directs construction site in achieving EHS targets &amp; objectives.</li><li>Involve in design review and make sure safety lesson learned are considered in new building design.</li><li>Pro-actively drives and promotes EHS culture throughout the construction site, e.g. by driving leading indicators.</li><li>Ensure zero tolerance culture is developed, recognition plan and discipline actions are in place and effective, and discipline actions well followed for unsafety behavior at construction site.</li><li>Drive construction EHS through close coordination with management team, safety leaders and EHS officers of company project management team, PM, GC, subcontractor per their scope of work, EHS plan, etc.</li><li>Organize regular EHS performance review to PM and GC EHS leaders per SOW and EHS plan, provide in time feedback to company project management team and leaders of PM and GC.</li><li>Report all EH&amp;S data and information as required by company. Use established EHS data processes such as Velocity to manage data such as injuries and illnesses, environmental metrics, risk assessments, EHS action items and other pertinent information.</li><li>Working with Construction project management team to develop management of change program at construction site.</li><li>For example, design change may trigger additional actions for safety, or to monitor and follow EHS law and regulatory revisions and report to EHS manager and Project Manager for actions required.</li><li>Training shall be delivered to leaders of project team, PM and GC about related safety alerts, new specifications and requirement from company, etc.</li><li>Work with site EHS leader and Construction Project Manager to prepare, submit and disseminate information in compliance with regulatory agencies in order to ensure timely submittals.</li><li>Work with Project and Construction Management team to ensure that all key EHS operational controls are in place and that EHS action items are resolved on a timely basis.</li><li>Strict Supervision of all contractor activities with PM in order to ensure compliance with EHS Work Permit.</li><li>Ensure emergency preparedness is in place, e.g. Construction Emergency Response Team ready to deploy in the events of fire, earthquake and strong typhoon.</li></ul> Requirements: <ul><li>College degree, major in Environmental, Safety, Chemical, Electrical, Mechanical, Civil Engineering or relevant.</li><li>5 years minimum as manager or can consider 10 years as safety supervisor / senior engineer.</li><li>Actual experience as Safety Officer or Pollution Control Officer role is an advantage.</li><li>Experience in working with multinational company local or in abroad.</li><li>Comfortable to Speak and write English to all level of organization.</li><li>Demonstrated ability in conducting EH&amp;S audits and inspections.</li></ul>

Responsibilities: <ul><li>Sales and Marketing Growth Plans – Crafted plans to explode total business growth</li><li>Portfolio Management – Working on multi-tier, multi-segment categories to accelerate growth across different consumer groups.</li><li>Distributor Management – Working with lot of distributors across the markets from business planning to marketing and sales strategies to in-store, below-the-line and above-the-line executions. Trained distributors on sell-out analysis to uncover growth gaps and opportunities.</li><li>Consumer-centric Category-Country Strategy – Designed and introduced the consumer insight-based growth strategy by category-country combination to unlock category and market growth, which was previously non-existent in the business.</li><li>Regional Campaign Design and Execution –Working on ideation, regional design and local adaptation and execution of campaigns that build on each category strategy.</li><li>Supply Chain Management – Initiated the full supply chain tracking system for Markets from ordering to shipping to systematize issue escalation and resolution (late ordering, delays, shelf-life issues, customer complaints) more actionable.</li><li>Forecasting and Demand Planning – Leads the demand planning process with the distributors starting with sell-out analysis and campaign planning to sell-in forecasting and shipment planning. Feeds this data to regional demand planning to ensure stock availability from Export Affiliates.</li><li>Create an inspiring team environment with an open communication culture.</li><li>Empowering team members with skills to improve their confidence, product knowledge, and communication skills</li></ul> Requirement:<ul><li>Education Background: Business Administration Degree</li><li>Education Level: Bachelor’s Degree minimum</li><li>Working Experience: At least 5 years of experience in Sales/ Marketing/ Business Development</li><li>Technical Skills: Proven progression in a product development</li></ul> Other Specific Requirements:<ul><li>Strong strategic and execution of sales</li><li>Excellent, proven communication, and influencing</li><li>Looking for having into Vietnam market</li></ul> Personality/ Attitude: <ul><li>Proactive, assertive, persistent, and empowering people</li><li>Able to work independently</li></ul>

Responsibilities: <ul><li>Lead Suppliers Audit of Supply Chain domain, support suppliers in diagnosing issues, analyzing data/process/system, drive action plans on continuous improvement</li><li>Governance actions progress with suppliers, make sure all open actions to be implemented and closed on time. Lead and document Supplier audit reports, create guidance book and strategy plans for long run.</li><li>Collaborating with procurement, suppliers, and vendors to align their processes with the transformation goals.</li><li>Establishing strong partnerships to drive mutual success.</li><li>Strategy Development: Developing a clear and comprehensive ‘Upstream Planning Blueprint’ for global network of BU Outside Group Vendor.&nbsp;</li><li>Involves identifying opportunities for improvement, setting objectives (long term and short term), and outlining the roadmap to achieve the desired changes.</li></ul> Vendor Delivery Performance Management:&nbsp; <ul><li>Monitor, Track and Orchestrate the Vendor Operations Performance with Organization on regular basis against established KPI (MOQ, Lead Times, Shipment Reliability, Forecast Reliability).</li><li>Analyze historical performance data to identify patterns, trends, and opportunities for improvement. Use data-driven insights to make informed decisions regarding vendor relationships and drive supplier accountability.</li><li>Lead Regular cross-functional reviews to share insights on Trends, Deviations, Root Cause Analysis and Action Plan Progress. Address Issues and drive Decision Making with stake holders to mitigate risks.</li><li>Digitalize to help in animation. Heatmaps to drive focus and prioritization.</li><li>Qualify and Guarantee Vendor Master Data Health</li></ul> Process Optimization:&nbsp; <ul><li>Evaluating existing upstream supply chain processes, identifying areas for optimization and efficiency improvement.</li><li>Implementing best practices and ensuring that processes are standardized and streamlined across factories.</li><li>Establish supply network operational excellence (SNOE) reviews with Key Vendor at regular frequency, with clear agenda and agreed action plan to improve performance.</li><li>Partner with Global Logistics to enable Raw Material Central Planning Hub&nbsp;&nbsp;&nbsp;</li><li>Drive IBP adoption towards forecast propagation and capacity commit backs.</li></ul> Upstream Vendor Portal: <ul><li>Be key user of BU Pilot of new external Vendor Portal solution. Drive successful Pilot, Broader roll out and adoption.</li><li>Establish current work process state, and journey map to Ideal End-Stage.</li><li>Articulation and maximization of value creation.</li><li>Skill Network and Cross-Functional Collaboration: Developing cross-BU network of Subject Matter Experts.</li><li>Sharing Best Practices, Documentation, and development of BU Upstream Playbook, including Make-Buy Decision Making, New Product Introduction (NPI), vendor changes, industrial transfers, and business acquisition.</li></ul> Risk Management:&nbsp; <ul><li>Identifying potential risks and vulnerabilities in the upstream supply chain and developing strategies to mitigate them.</li><li>Ensuring supply chain resilience and contingency planning to handle disruptions effectively.</li></ul> Continuous Improvement: <ul><li>Encouraging a culture of continuous improvement within the supply chain organization.</li><li>Seeking feedback from stakeholders and leveraging lessons learned to refine strategies, establishing volution of in-process KPIs and achieve better results.</li></ul> Requirements: <ul><li>A bachelors degree in supply chain management, business administration, industrial engineering, or a related field</li><li>Minimum of 5-10 years’ experience in a multinational and complex global environment.</li><li>Progressively more responsibility and experience in Procurement and Factory Supply Chain Management leadership roles.</li><li>High proficiency in Vendor Management, Procurement and Material Management.</li><li>Must be a recognized leader for continuous improvement.</li><li>Abilities to drive and oversees multiple Projects End-to-End, with track record of achieving results and abilities to drive effective change management.</li><li>Competent with supply chain management software (SAP Must, IBP is a plus) and analytics tools.</li><li>Demonstrated leadership skills with the ability to lead and inspire diverse teams across different locations.</li><li>Understand business drivers and able to balance between short- and long-term objectives.</li><li>Excellent ‘English’ communication skills to articulate and engage stakeholders at all levels.&nbsp;</li></ul>

Responsibilities : <ul><li>Set-up a range of 3, 4, and 5 axis CNC machine tools by installing and adjusting work holding devices, tooling, spindle liners and bar feeders.</li><li>Operate a range of 3, 4, and 5 axis CNC machine tools, ensuring that machine down time is minimised.</li><li>Verify programs and settings using a range of measuring equipment on first articles and apply appropriate adjustments and program modifications.</li><li>Ensure component compliance in accordance with engineering drawings and quality procedures using a range of inspection equipment.</li><li>Record daily operations on machine tools and provide operational equipment effectiveness (OEE) results daily.</li><li>Contribute to continuous improvement activities within the department. Improving processes and applying tools and methods from the our client site plan.</li><li>Maintain and improve time standards.</li><li>Ensure that daily maintenance is carried out as required.</li><li>Maintain a high level of housekeeping.</li><li>Observe health and safety regulations as laid down in company procedures and government legislation.</li><li>Adhere to company procedure at all times.</li><li>To support with any other ad-hoc tasks where required</li><li>To carry out any other reasonable tasks as may be requested from time to time by the business within Production or elsewhere as may be required.</li></ul> Requirements : <ul><li>Time served apprentice with C&amp;G/NVQ or equivalent in mechanical engineering discipline.</li><li>Experience working on alternating early/late shifts with minimal supervision.</li><li>Experience setting and operating 3, 4 and 5 axis CNC machine tools.</li><li>Experience of Fanuc, Citizen and Mazatrol is desirable.</li><li>Ability to interpret engineering drawings.</li><li>Experience using a range of measurement equipment.</li><li>Ensure compliance with all our client policies and procedures, EHS and safety first together with delivering exception ECE.</li><li>Driving and encouraging the values and key behaviours in all actions</li><li>Highest level of accuracy/attention to detail, to ensure standards of work are exemplary with minimal defect.</li><li>Organized and self-motivated to work with minimal supervision.</li><li>Demonstrate initiative, flexibility and willingness to take on additional tasks and responsibility in an efficient manner.</li><li>Excellent communication at all levels both internally and externally.</li><li>Fully flexible with tasks and the ability to multi-skill.</li></ul>

Responsibilities : <ul><li>Conduct electrical, mechanical, and environmental testing on our client products for the purpose of Engineering Evaluation and Qualification.</li><li>Prepare samples using hand tools and soldering.</li><li>Run a variety of computer and microprocessor-controlled test equipment.</li><li>Set-up &amp; operate environmental, mechanical and electrical test equipment</li><li>Review and summarize data.</li><li>Maintain the integrity of test results by complying with Corporate, Business Unit and local quality system requirements.</li><li>Review active test programs and final test results to ensure that performance requirements are met.</li><li>Capable of working to specifications, drawings, diagrams, and schematics.</li><li>Ensure all safety requirements are met and followed</li><li>Write test documentation and reports.</li><li>Perform other duties as assigned by management.</li><li>Overtime or temporary shift in hours may be required at times to support high priority business needs.</li></ul> Requirements : <ul><li>A preferred candidate should have, or be actively pursuing, an HNC or equivalent in Electronic or Mechanical Engineering, or have 3-5 years’ experience in testing.</li><li>Background of mechanical experience to aid fixture design and construction.</li><li>Good soldering skills and manual dexterity.</li><li>Hands on experience for tearing apart assemblies / sub-assemblies of electro mechanical parts</li><li>Good Conceptual, problem solving and Analytical Skills</li><li>Excellent verbal and written communication skills.</li><li>Excellent attention to detail</li><li>Knowledge of Six Sigma tools will be an added advantage</li><li>Proficient in MS Office Suite</li><li>Ability to work in a hands-on environment.</li><li>Ability to work well with others of diverse backgrounds.</li><li>Knowledge of Global Certifications and Regulatory Standards (UL, IEC, MIL etc.) is an advantage</li><li>Must be capable of multitasking and taking full ownership of assigned projects.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or UK Military controls.</li></ul>

Responsibilities: <ul><li>Responsible for Sales Volumes and Market Share of Light Commercial vehicles through local dealers in respective territory.</li><li>To identify and engage with strategic customers / Fleet owners.</li><li>To conduct activities of this segment customers like transporters, influencers and to materialize deals by working out group deals.</li><li>To map sub territories segment wise, application wise and working on conversion plan.</li><li>Should be able to do sales forecasting for existing range of models / products.</li><li>To guide channel partners to develop secondary sales network.</li><li>To act as an interface between the Product development / PMG team and the end customers.</li><li>To gauge and give inputs regarding the customer expectations through timely reports to product development / PMG team.</li><li>To know competitors activities, new product plans and prepare strategy to counter the same.</li><li>To train, motivate and develop the channel partners and their sales team.</li><li>To develop the market through host of BTL activities most suited for that market and segment</li></ul> Requirements: <ul><li>Education – BE/MBA&nbsp;</li></ul> Skills: <ul><li>Sales Planning</li><li>Manpower Management&nbsp;</li><li>Product Knowledge &amp; Application&nbsp;</li></ul>

Responsibilities: <ul><li>Responsible for Sales Volumes and Market Share of Heavy Commercial vehicles through local dealers in respective territory.</li><li>To identify and engage with strategic customers / Fleet owners.</li><li>To conduct activities of this segment customers like transporters, influencers and to materialize deals by working out group deals.</li><li>To map sub territories segment wise, application wise and working on conversion plan.</li><li>Should be able to do sales forecasting for existing range of models / products.</li><li>To guide channel partners to develop secondary sales network.</li><li>To act as an interface between the Product development / PMG team and the end customers.</li><li>To gauge and give inputs regarding the customer expectations through timely reports to product development / PMG team.</li><li>To know competitors’ activities, new product plans and prepare strategy to counter the same.</li><li>To train, motivate and develop the channel partners and their sales team.</li><li>To develop the market through host of BTL activities most suited for that market and segment</li></ul> Requirements: <ul><li>Education Qualification: MBA; Bachelor of Engineering</li><li>General Experience:&nbsp;3-12 Years of experience</li></ul> Skills <ul><li>Channel Sales Management&nbsp;</li><li>1st Pref Heavy Commercial Vehicle only</li><li>2nd Pref CE Industry – Haulage &amp; Tipper, also HCV segment</li><li>Channel Manpower Management – Dealer&nbsp;</li><li>Financial Management</li><li>Sales Planning</li><li>Capability Building</li><li>Consumer Focus</li><li>Market Intelligence</li><li>Territory Coverage Optimization</li></ul>

Responsibilities: <ul><li>People Management and People Leader&nbsp;</li><li>PEZA, Customs and All Government Offices Management Related to Plant and Transportation (International and Local)</li><li>Escalation for transportation, Inbound and Outbound logistics operations.</li><li>Global Trade Compliance interaction with trade people to make sure all shipments are compliant from origin and destination side</li><li>Global Supply Chain Management&nbsp;</li><li>Escalation point person for all of shipments to ensure the compliance on regulations</li><li>Monitoring of the deliveries, handling insurance coverages, duties as well as tax obligations</li><li>Designing and implementing all export and import strategies and preparing effective business plans Resolving the queries of the clients related to export and import process and expenses.</li><li>Interact with customers/clients face to face or over the phone and foster and develop relationships with customers/clients</li><li>Review and Approval of all incoming bill of lading with attention to discrepancies.</li><li>Audits bill of lading to ensure billing requirements are met.</li></ul> Requirements: <ul><li>Bachelors Degree in Supply Chain, Industrial Engineering</li><li>Monitoring of performance of all forwarders, couriers and service providers related to Transportation</li><li>SOP and SOW Management&nbsp;</li><li>Communication and Coordination with PEZA, Customs, PDEA, Brokers, Consultants and other government agencies as needed.</li><li>On time Renewal of all government requirements for shipment purposes</li><li>Reports and Analysis on Freight Spend and Transportation improvement programs</li><li>Cost Savings&nbsp;</li><li>Meeting all the compliances related to regulatory and corporate requirements</li><li>Follows rules and regulations EHS, GST etc.</li><li>Environmental health and safety associated with his responsibilities</li></ul>

Responsibilities: <ul><li>Analyze forecast signals from the Demand Planning team to generate an optimized build plan while ensuring effective communication across extended supply chain.</li><li>Lead the MPS function to optimize the production plan with the aim to support customer demand, optimize production utilization and balancing inventory in a targeted manner.</li><li>Lead the Material Planning team ensuring implementation of production plan of work centers, machines, or processes to meet customer requests.</li><li>Monitor MRP system setup, identify capacity constraints and proactively expand drive capacity to avoid supply and demand gaps.</li><li>Ensure appropriate parameter settings, system settings and system usage.</li><li>Lead the Materials Analyst team ensuring the right amount of material is procured within the appropriate timing.</li><li>Develop standards for materials management including appropriate levels of safety stock, in-process inventory, and finished goods.</li><li>Handles the disposition of obsolete inventories according to the company’s policy.&nbsp;</li><li>Oversee and supervise physical inventories.</li><li>Active participation in monthly Supply Review Meeting, identifying risks and opportunities and ensuring necessary proactive measures are taken to close gaps to meet budgets.</li><li>Develop new and existing relationships with suppliers.</li><li>Coordinate information flow between planning, warehouse, and production teams.</li><li>Lead, manage, motivate, and develop Supply chain team.</li><li>Proactively approach other functions within Demand Planning, Customer Service and Supply Chain for end-to end optimization.</li><li>Accountable for the timely and accurately execution at the shipping and receiving areas.</li><li>Track and control supply chain KPIs including corrective measure to management on regularly base.</li><li>Improve the overall supply chain performance and look for any possible innovations to the process.</li></ul> Requirements: What your background should look like: <ul><li>Bachelor’s degree and 8+ years’ Supply Chain / Materials Planning experience, including 3+ years in a leadership role.</li><li>People with no degree, but equivalent level of qualification in relevant disciplines, will also be considered.</li><li>Experience in working with ERP systems and other IT systems at customer interface, e.g. SAP,&nbsp;&nbsp;EDI.</li><li>Experience with high mix, low volume manufacturing.</li><li>Good communication skills, able to build customer relations and win customers for own ideas.</li><li>Strong analytical, problem-solving, and decision-making skills.</li><li>Process Improvement.</li></ul> Competencies: <ul><li>Motivating Others.</li><li>Building Effective Teams.</li><li>Managing and Measuring Work.</li><li>Values: Integrity, Accountability, Inclusion, Innovation, Teamwork.</li><li>SET: Strategy, Execution, Talent (for managers).</li></ul>

Responsibilities: <ul><li>Coordinate scheduling of resources and tests to maximize lab utilization while meeting project deadlines and communicating them to (primarily internal) customers.</li><li>Lead and mentor a team of technicians and engineers, providing guidance, training, and support as needed.</li><li>Manage inventory of high voltage testing equipment, including procurement, maintenance, and retirement planning.</li><li>Ensure compliance with safety standards and regulations, implementing necessary policies and procedures to maintain a safe working environment.</li><li>Ensure compliance with audits such as ISO 17025.&nbsp;</li><li>Monitor project progress, identify potential issues, and implement solutions to ensure successful project completion</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering, Physics, or a related field; Master’s degree preferred.</li><li>8+ years’ experience with minimum 2+ years in high voltage testing 35kV+, and should have 2+ years’ in leadership role - preferably in an industrial or research setting; and laboratory experience required.</li><li>Proven project management abilities, including the ability to prioritize tasks, allocate resources, and meet deadlines.</li><li>Excellent leadership and communication skills, with the ability to effectively manage teams and collaborate with diverse stakeholders.</li><li>Understanding of electrical engineering principles, particularly in the areas of high voltage systems and insulation testing.</li><li>Familiarity with relevant standards and regulations, such as IEEE, IEC, ANSI, and NFPA.</li><li>Attention to detail and a commitment to quality, with the ability to troubleshoot problems and implement solutions in a timely manner.</li></ul>

Skills

Industry

Location

Jobtitle

127 safety plans Jobs found

EHS Manager

Sr. Business Development Manager (Vietnam Market)

Upstream Flow Supply Chain Analyst

CNC Machinist IV

Test Laboratory Engineer

Sales Manager – ILCV (Intermediate & Light Commercial Vehicle 10 to 18 tonner)

Sales Manager – HCV

Logistics Supervisor

Supply Chain Manager

Technical Support Manager

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

127 safety plans Jobs found

EHS Manager

Sr. Business Development Manager (Vietnam Market)

Upstream Flow Supply Chain Analyst

CNC Machinist IV

Test Laboratory Engineer

Sales Manager – ILCV (Intermediate & Light Commercial Vehicle 10 to 18 tonner)

Sales Manager – HCV

Logistics Supervisor

Supply Chain Manager

Technical Support Manager

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.