EHS Manager

Operations Manager

CNC Machinist IV

Logistics Supervisor

Laboratory Supervisor

118762 Sr MFG & Process DVL Engineer - Cable Assembly

Responsibilities: <ul><li>Reports to EHS site Manager and Construction Project Manager all EHS related issues, concerns, improvements with a goal on achieving leading indicators and ZERO Recordable Incident Rate. </li><li>Ensure EHS compliance to all legal and other requirements associated with regulatory, local and other requirements.</li><li>Facilitates risk assessment to identify critical safety or health hazards and environmental aspects per company standard/spec and local regulatory standards.</li><li>Works with Project Management Team and Contractor’s leadership team to create targets and objectives based on key EHS risks.</li><li>Verify the EHS plan from Project Management company (PM), and work with PM to validate EHS plan from general contractor (GC).</li><li>Manages and directs construction site in achieving EHS targets &amp; objectives.</li><li>Involve in design review and make sure safety lesson learned are considered in new building design.</li><li>Pro-actively drives and promotes EHS culture throughout the construction site, e.g. by driving leading indicators.</li><li>Ensure zero tolerance culture is developed, recognition plan and discipline actions are in place and effective, and discipline actions well followed for unsafety behavior at construction site.</li><li>Drive construction EHS through close coordination with management team, safety leaders and EHS officers of company project management team, PM, GC, subcontractor per their scope of work, EHS plan, etc.</li><li>Organize regular EHS performance review to PM and GC EHS leaders per SOW and EHS plan, provide in time feedback to company project management team and leaders of PM and GC.</li><li>Report all EH&amp;S data and information as required by company. Use established EHS data processes such as Velocity to manage data such as injuries and illnesses, environmental metrics, risk assessments, EHS action items and other pertinent information.</li><li>Working with Construction project management team to develop management of change program at construction site.</li><li>For example, design change may trigger additional actions for safety, or to monitor and follow EHS law and regulatory revisions and report to EHS manager and Project Manager for actions required.</li><li>Training shall be delivered to leaders of project team, PM and GC about related safety alerts, new specifications and requirement from company, etc.</li><li>Work with site EHS leader and Construction Project Manager to prepare, submit and disseminate information in compliance with regulatory agencies in order to ensure timely submittals.</li><li>Work with Project and Construction Management team to ensure that all key EHS operational controls are in place and that EHS action items are resolved on a timely basis.</li><li>Strict Supervision of all contractor activities with PM in order to ensure compliance with EHS Work Permit.</li><li>Ensure emergency preparedness is in place, e.g. Construction Emergency Response Team ready to deploy in the events of fire, earthquake and strong typhoon.</li></ul> Requirements: <ul><li>College degree, major in Environmental, Safety, Chemical, Electrical, Mechanical, Civil Engineering or relevant.</li><li>5 years minimum as manager or can consider 10 years as safety supervisor / senior engineer.</li><li>Actual experience as Safety Officer or Pollution Control Officer role is an advantage.</li><li>Experience in working with multinational company local or in abroad.</li><li>Comfortable to Speak and write English to all level of organization.</li><li>Demonstrated ability in conducting EH&amp;S audits and inspections.</li></ul>

Responsibilities: Policies and Procedures <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy.</li></ul> People Management and Development <ul><li>Allocate and balance work across direct reports; authorize subordinate to perform tasks in order to enhance their capabilities;</li><li>Review and provide timely performance feedback to direct reports;</li><li>Mentor subordinates in daily work, provide technical and non-technical training;</li><li>Develop succession plan and employee development plan and monitor the execution;</li><li>Prepare manpower plan and application, conduct candidate interview and give opinion;</li><li>Conduct regular staff meeting on management skills improvement;</li><li>Resolve people/functional issues in the team in order to achieve targeted department performance and retain key talent.</li></ul> Production Capacity Plan <ul><li>Develop production capacity plan base on business forecast in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Manufacturing Management <ul><li>Manage Assembly , Molding, Stamping Operations along with EHS, Facility, Tooling maintenance and execute production plan ; Closely collaborate with quality, project engineering, Materials, ME, and solve operational issues, and update the key issues with ASEAN Operations Manager in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Key Engineering Capability Development <ul><li>Involve and support (including allocate resource and provide advice) key Engineering capability development in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Production Quality System and EHS <ul><li>Maintain production quality system in order to improve manufacturing efficiency and achieve operation excellence.</li><li>Monitor the implementation of company EHS policy in production process in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Requirements: <ul><li>Bachelor degree in Engineering.</li><li>12- 15 years manufacturing experience including 8 years general operational management experience.</li></ul>

Responsibilities : <ul><li>Set-up a range of 3, 4, and 5 axis CNC machine tools by installing and adjusting work holding devices, tooling, spindle liners and bar feeders.</li><li>Operate a range of 3, 4, and 5 axis CNC machine tools, ensuring that machine down time is minimised.</li><li>Verify programs and settings using a range of measuring equipment on first articles and apply appropriate adjustments and program modifications.</li><li>Ensure component compliance in accordance with engineering drawings and quality procedures using a range of inspection equipment.</li><li>Record daily operations on machine tools and provide operational equipment effectiveness (OEE) results daily.</li><li>Contribute to continuous improvement activities within the department. Improving processes and applying tools and methods from the our client site plan.</li><li>Maintain and improve time standards.</li><li>Ensure that daily maintenance is carried out as required.</li><li>Maintain a high level of housekeeping.</li><li>Observe health and safety regulations as laid down in company procedures and government legislation.</li><li>Adhere to company procedure at all times.</li><li>To support with any other ad-hoc tasks where required</li><li>To carry out any other reasonable tasks as may be requested from time to time by the business within Production or elsewhere as may be required.</li></ul> Requirements : <ul><li>Time served apprentice with C&amp;G/NVQ or equivalent in mechanical engineering discipline.</li><li>Experience working on alternating early/late shifts with minimal supervision.</li><li>Experience setting and operating 3, 4 and 5 axis CNC machine tools.</li><li>Experience of Fanuc, Citizen and Mazatrol is desirable.</li><li>Ability to interpret engineering drawings.</li><li>Experience using a range of measurement equipment.</li><li>Ensure compliance with all our client policies and procedures, EHS and safety first together with delivering exception ECE.</li><li>Driving and encouraging the values and key behaviours in all actions</li><li>Highest level of accuracy/attention to detail, to ensure standards of work are exemplary with minimal defect.</li><li>Organized and self-motivated to work with minimal supervision.</li><li>Demonstrate initiative, flexibility and willingness to take on additional tasks and responsibility in an efficient manner.</li><li>Excellent communication at all levels both internally and externally.</li><li>Fully flexible with tasks and the ability to multi-skill.</li></ul>

Responsibilities: <ul><li>People Management and People Leader&nbsp;</li><li>PEZA, Customs and All Government Offices Management Related to Plant and Transportation (International and Local)</li><li>Escalation for transportation, Inbound and Outbound logistics operations.</li><li>Global Trade Compliance interaction with trade people to make sure all shipments are compliant from origin and destination side</li><li>Global Supply Chain Management&nbsp;</li><li>Escalation point person for all of shipments to ensure the compliance on regulations</li><li>Monitoring of the deliveries, handling insurance coverages, duties as well as tax obligations</li><li>Designing and implementing all export and import strategies and preparing effective business plans Resolving the queries of the clients related to export and import process and expenses.</li><li>Interact with customers/clients face to face or over the phone and foster and develop relationships with customers/clients</li><li>Review and Approval of all incoming bill of lading with attention to discrepancies.</li><li>Audits bill of lading to ensure billing requirements are met.</li></ul> Requirements: <ul><li>Bachelors Degree in Supply Chain, Industrial Engineering</li><li>Monitoring of performance of all forwarders, couriers and service providers related to Transportation</li><li>SOP and SOW Management&nbsp;</li><li>Communication and Coordination with PEZA, Customs, PDEA, Brokers, Consultants and other government agencies as needed.</li><li>On time Renewal of all government requirements for shipment purposes</li><li>Reports and Analysis on Freight Spend and Transportation improvement programs</li><li>Cost Savings&nbsp;</li><li>Meeting all the compliances related to regulatory and corporate requirements</li><li>Follows rules and regulations EHS, GST etc.</li><li>Environmental health and safety associated with his responsibilities</li></ul>

Responsibilities: <ul><li>Collaborates with engineering, operations and customers to plan and test products.</li><li>Facilitates development processes, coordinates materials and component integration.</li><li>Execution and evaluation of tests.</li><li>Support of the laboratory team with special technical problem solving.</li><li>Scheduling and allocation of tests to be carried out.</li><li>Equipment utilization optimization</li><li>Clarification of the test conditions and the creation of the specifications for the test</li><li>Continuous improvement process,EHS</li><li>Disciplinary and methodical leading of the team Creates and monitors development plans; communicates working activities/status to team, management, sales and operations.</li><li>Supervises and supports development staff; participates in training, development and performance management of team members, as well as conducting annual employee evaluations.</li></ul> Requirements: <ul><li>Bachelor’s degree in electrical engineering is a must. Master’s degree is a plus.</li><li>Minimum of 2 years of experience in a supervising role in a test laboratory related to electrical testing.</li><li>MS Office.</li><li>Automation knowledge is an advantage.</li><li>Electrical schematic basics are an advantage.</li><li>CAD basics are an advantage.</li><li>Knowedgle of the system LIMS (Laboratory Information Managment System) is an advantage.</li><li>Electronic design and PCB routing is an advantage.</li><li>English fluent and fluent in Czech.</li></ul>

Job Summary: <ul><li>Design and develop manufacturing process, tool, fixture and related equipment for cable assembly as project schedule with the objective of ensuring the whole manufacturing process is competitive and meet cost target within the direction of department manager and project manager.&nbsp;</li><li>Design and develop manufacturing process for new project/product, meet CoPQ and delivery target.</li></ul> Responsibilities: Manufacturing Process Development: <ul><li>Define, review and confirm the entire manufacturing process from start to finish.</li><li>Coordinate Design for Manufacturing (DFM) review, and initiate Process Failure Modes and Effects Analysis (PFMEA) with core team members.</li><li>Prepare documentations and process specifications for production.</li><li>Lead team in identification, tracking and resolution of engineering issues using the Failure Analysis and Corrective Action (FACA) form.</li><li>Continuous manufacturing process improvement with company OA tools for cost reduction.</li></ul> Assembly Tool, Fixture and Equipment Development: <ul><li>Evaluate new tool, fixture, and equipment demand/cost for new projects.</li><li>Design and review the tool, fixture and equipment with core team members meeting company engineering and EHS requirement.&nbsp;</li><li>Upload all tooling prints to company data management system(DM.TEC, PDMLink, etc.)</li><li>Discuss and review details of tool/fixture/equipment with outside supplier.</li><li>Follow up the purchasing process to fabricate new tool/fixture/equipment.</li></ul> Qualification for Manufacturing process, Tool, Fixture, and Equipment: <ul><li>Condition all tool, fixture and equipment, lead the tool/fixture/equipment qualification by running samples or LVM.&nbsp;</li><li>Follow up the documentations for qualification, using company standard format and follow up the approval.</li><li>Coordinate pilot run for new products and solve engineering issues, make sure the manufacturing process capability meet engineering, quality and customer requirement.</li></ul> Technician Guidance: <ul><li>Coach, train and develop operator and technician in order to ensure their technique could be succeed and get continuous upgraded.</li></ul> Requirements: <ul><li>Bachelor degree or above. Mechanism engineering related background.&nbsp;</li><li>5 years’ working experiences in related field.</li><li>Good coordination and communication skill, accountability, integrity, customer focus.</li></ul>

Skills

Industry

Location

Jobtitle

6 wwi in ehs Jobs found

EHS Manager

Operations Manager

CNC Machinist IV

Logistics Supervisor

Laboratory Supervisor

118762 Sr MFG & Process DVL Engineer - Cable Assembly

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

6 wwi in ehs Jobs found

EHS Manager

Operations Manager

CNC Machinist IV

Logistics Supervisor

Laboratory Supervisor

118762 Sr MFG & Process DVL Engineer - Cable Assembly

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.