Manufacturing Engineer

Technical Support Engineer

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

120368 Senior Manufacturing Engineer

125112 Vision System Engineer

Principal Signal Integrity Engineer

125112 Assembly Vision System Engineer

118175 Molding Manufacturing & Process Development Engineer

Cloud Infrastructure Engineer III

Responsibilities: <ul><li>Supplier Engineering Capability</li><li>Support Sourcing for new supplier qualification</li><li>Support Sourcing for supplier exit</li><li>Support SQE for supplier audit</li><li>Supplier assessment, to improve supplier capability</li></ul> New Project <ul><li>Support Sourcing for new product 安定quotation</li><li>As project leader (for Micro Lite project), to manage new project for on schedule approval</li><li>As manufacturing engineer, to support supplier for DFM and PFMEA etc. preparation and design review etc.</li><li>As manufacturing engineer, to support supplier for process and tool design and qualification</li><li>Follow up sample making issues and sample schedule which requested by customer or PDE. and work with cross function team members and supplier for improvement until approval</li><li>Work with PBL suppliers for packing design and qualification test</li><li>Work with supplier to get all engineering documents done</li><li>Work with SQE and supplier for safe launch process audit</li></ul> Sustain Product <ul><li>Work with Sourcing and supplier to review and improve capacity, including/lead copied tool qualification</li><li>Work with SQE and supplier to improve process yield and any quality problems</li><li>Follow EC change and 4M change</li><li>Follow material change (alternative), to work with team members to lead new material qualification progress</li><li>Follow supplier change or migration project (from company plant to PBL supplier), to work with cross function team members and supplier to follow qualification</li></ul> Productivity <ul><li>Work with suppliers and team members to find the improvement opportunities, such as process, material, plating, packing etc.</li><li>Follow VAVE project, work with supplier and team members to drive the project and cost reduction</li><li>Support Sourcing for cost reduction nego</li></ul> Capex Management and Equipment Maintenance <ul><li>Follow capex qualification, and work with Finance and Sourcing and PBL supplier to manage those capex well</li><li>Support PBL supplier to prepare equipment and tool maintenance plan and monitor the plan conducted well by supplier</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree and mechanical related background</li><li>Total Working experience 8 years above</li><li>Over 5 years Connector and / or Cable manufacturing engineering experiences</li></ul>

Overview:&nbsp; <ul><li>You shall be a part of the Technical Support Center (based out in Pune, India).</li><li>The Technical Support Center is a team of highly responsive technology specialists whose #1 focus is to</li><li>support/resolve the customers for Presales and Post Sales Technical issues while delivering the best</li><li>possible customer experience.&nbsp;</li><li>You can measure your success through excellent financial results, growing</li><li>customer happiness metrics, industry recognition, on time resolution and employee happiness scores.</li><li>You shall be the first point of contact for customers and partners all over Americas, EMEA &amp; APAC.</li><li>Youll have insight on the detailed functionality of products and partner with all distributed</li><li>elements of the service chain.</li></ul> Responsibilities: <ul><li>You will be responsible for creating and driving support tickets within the required SLA parameters.</li><li>will depend on you to provide the highest standard of customer support for Switching, routing</li><li>,security , Wireless, Cables &amp; Connectivity.</li><li>Remotely provide Presales as well as Post sales support making sure the customer is satisfied with the level of service provided. Manage the tech support day-to-day operations to achieve qualitative and quantitative targets at team/staff level and to maintain overall quality standards.</li><li>You shall be responsible for achieving all metrics for the respective customer/partner, as defined by the management with particular focus on customer satisfaction. </li><li>Gather the required information necessary to best handle customer software and technical inquiries.</li><li>Resolving the issues through Phone, chat and ticketing tool - communication channels.&nbsp;</li><li>Collaborate with Technical Support team members to properly manage customer queries and escalate when appropriate.</li><li>Document solutions for knowledgebase.</li><li>Work to support customer technical issues encompassing hardware, software, and networking.&nbsp;</li><li>Create knowledge base articles on products.</li><li>Connect with wide range of people and teams to find these solutions such as Solution Consultants,Product Line Managers, and the various plants.</li><li>Provide technical service for products and solutions in India and deliver professionally and</li><li>disciplinarily.</li><li>Deliver end to end solution as per customer demand.</li><li>Assist customers with Support Requests and engaging with other Teams ensuring follow up on each request and solution is provided.</li><li>Continuous improvement of their professional certification level.</li></ul> Requirements : <ul><li>Bachelor’s degree in Telecom, Computer Science, Electrical Engineering/Electronics/ IT.</li><li>CCNA Certified. Hirschmann switches, router and security devices knowledge would be added</li><li>advantage.</li><li>Minimum 3-10 years working experience.</li><li>2~3 year’s implementation experience in Managed and unmanaged switches, Internet wireless LAN,</li><li>Industrial Security Systems, Embedded Ethernet modules, Fiber optic field bus repeaters, Secure</li><li>remote access, Network Management Software, Industrial Connectors, industrial network security</li><li>products for process control, SCADA manufacturing and automation sectors.</li><li>Experience in customer support, service or after sales in networking system will be added advantage.</li><li>Understanding of networking protocols.</li><li>Knowledge of transmission technology, OTN and Network Access control would be a plus.</li><li>Hands-on experience with monitoring, network diagnostic and network analytics tools/network</li><li>configuration experience with Cisco etc.</li><li>Ability to quickly learn new or unfamiliar technology and products using documentation and internetresources.</li><li>Basic Level of understanding of Routing and Switching, Basic Data networking, including DHCP, RSTP, VLAN, QoS, IGMP, network redundancy, IP routing protocols and standard VPN technology.</li><li>Industrial networking and IIoT/IoT digitalization knowledge would be added advantage.</li><li>Good English in reading and written, and good oral English is a must.</li><li>Ability to multitask in a fast-paced environment.</li></ul>

Responsibilities: <ul><li>The R&amp;D/Product Development Engineering is responsible for the design, development of product line extensions of legacy product, with a focus on sustaining engineering of contactors/relays, power distribution panels and related products for applications in aerospace electrical power distribution and management systems.&nbsp;</li><li>The ideal candidate should be able to work independently and within a team-based environment. Determine product requirements based on internal/external product design specifications and Voice of the Customer inputs. Plan and record results of design, development, and sustaining activities, including validation testing.&nbsp;</li><li>Design to cost target while meeting financial and performance expectations.&nbsp;</li><li>Manage Bill of Materials for products. Facilitate cost reduction activities on new and existing products. Perform calculations, analysis, and testing to ensure that a product meets specifications. Participate in and/or lead Design and Process failure mode and effects analysis.&nbsp;</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers, and external customers.&nbsp;</li><li>Initiate and manage engineering change activities. Apply electrical, electronic, and mechanical principles to components, including assembly, analysis, and documentation of results.&nbsp;</li><li>Supports, participates, and leads design, test, modification, fabrication, and assembly of prototype devices.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree</li><li>3-5 years of experience</li><li>Experience circuit design, testing, and troubleshooting</li><li>Experience in mechanical design</li><li>Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors)</li><li>Knowledge of EMI/EMC is a plus</li><li>Good communication verbal and written</li><li>Experience in the use of Creo Wildfire software or similar CAD software</li><li>Windchill PDMLink is a plus</li><li>Knowledge of SAP is a plus</li><li>Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred</li><li>Knowledge of circuit analysis software such as TINA or SPICE</li><li>Knowledge of ANSYS or similar analysis tools is a bonus</li><li>Experience in Altium software or similar software is a bonus</li><li>Proficient in MS Office Suite of Products</li><li>Ability to read schematic diagrams</li></ul>

Responsibilities: Rules &amp; Procedures: <ul><li>Serve on-site production delivery and quality performance, be responsible for solving difficult problems and continuous improvement of mold maintenance technology, </li><li>TPM management performance of mold maintenance &amp; spare parts management, etc., and effectively implement TEs core values.</li></ul> Solve difficult problems in mold maintenance technology &amp; continuous improvement: <ul><li>Analysis and solution of various mold technical problems in the mold production process &amp; continuous improvement, involving quality, output, abnormal downtime, work efficiency, etc., with engineering and technical ideas to analyze the causes of problems, solution design drawings and result verification, and effectively expand horizontally.</li><li>Summarize the experience of solving technical problems of mold maintenance, and continue to improve the standardization of mold maintenance</li></ul> Mold Repair TPM Management Performance &amp; Spare Parts Management Improvement: <ul><li>Mold maintenance preventive work summary and machine change planning, effectively improve mold maintenance abnormal shutdown, maintenance work efficiency and maintenance and repair time cycle.</li><li>Effectively improve the accuracy of mold parts management and abnormal fast response, and continuously improve the maintenance cost and inventory of mold parts.</li></ul> Requirements: Education:&nbsp; <ul><li>Major, Mechanical design/Mold design, etc., college degree or above Plus read and write English</li></ul> Work experience: <ul><li>Process Engineer More than two years of on-site maintenance experience in stamping dies, CI Engineer&nbsp;</li><li>precision stamping/ordinary stamping</li><li>More than two years of stamping die engineering technology improvement (design IE engineer&nbsp;</li><li>production technician Work experience, working experience in the electronic stamping industry of foreign companies Stamping Process Technician&nbsp;</li><li>UP Technician (Bond6) Priority is given to testing.</li><li>ME Backup</li></ul> Ability requirements: <ul><li>Proficient in the use of CAD and other engineering drawing software, mold parts design improvement drawings, specific technical problems analysis and engineering technology improvement ability;</li><li>Proficient in the use of office software, able to conduct data analysis and summary, experience summary of difficult problems and continuous improvement and follow-up ability.</li><li>Familiar with lean/problem solving tool applications such as lean KAIZEN, TPM, STD work, etc., and familiar with the application of management performance indicators such as OEE, QCO, spare parts management, etc.</li><li>Familiar with five major tools such as quality management, PFMEA, APQP and so on is preferred.</li><li>Good communication skills, teamwork, problem-solving and planning skills.</li></ul>

Responsibilities: Capacity planning for short-term &amp; long-term according to production requirements: <ul><li>Machine, Tool, Labor, Layout capacity management</li><li>Capacity improvement plan</li></ul> Cost analysis and cost improvement management: <ul><li>Cost analysts are involved in detailed cost research and comparative analysis including to competitors.</li><li>Drive cost reduction initiatives</li></ul> Upgrade the productivity and achieve cost control target: <ul><li>Identify, lead &amp; drive efficiency improvement projects to reduce the conversion cost;&nbsp;</li><li>Set and control the manufacturing standard time</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or equivalent education with IE major</li></ul> Qualification &amp; Certification: <ul><li>Familiar with MS office software</li><li>Familiar with Auto-CAD drawing</li></ul> Experience: <ul><li>4+ years on industrial engineering experience, lean/6 six sigma related</li><li>Cost analysis related background is plus;</li><li>Have independent project leader experience</li></ul> Technical Skill &amp; Competencies: <ul><li>Layout for exist and new expansion, Optimize the plant/workshop layout to improve space utilization</li><li>Capacity forecast and adjustment, analysis improvement opportunity and make investment proposal</li><li>Lead labor efficiency &amp; line balance improve/optimization</li><li>Involve key project detail design of machine/material/process</li><li>Deep understand of IE toolset, such as ECRS/Time study/cell design</li></ul>

Responsibilities: Quality Documents Preparation and Revise. DQIP, Workmanship, Control Plan: <ul><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li></ul> Setup &amp;F AAR: <ul><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li></ul> MSA (GRR),gage: <ul><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li></ul> PFMEA: <ul><li>Assure the process risk control basing on efficient PFMEA.</li></ul> NCR &amp; QA instruction : <ul><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D CHS</li><li>8D report prepare and CHS system handling</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results</li></ul> Training: <ul><li>Providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education,Technical Qualification &amp; Experience: <ul><li>Bachelor degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>MSA, SPC, FACA</li><li>Familiar with quality management tools, such as MSA, SPC, FACA etc</li></ul> Personal Attributes &amp; Competencies: <ul><li>Integrity; Accountability; Communication; Outgoing.</li><li>Good capability of logical thinking, self-study and independent problem solving</li></ul>

Responsibilities: <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles</li><li>Establishing signal integrity design performance/functional requirements for new products</li><li>Performing signal integrity simulations for multiple high-speed standards on each product.&nbsp;</li><li>This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.</li><li>Performing PCB design schematic and layout reviews</li><li>Creating actionable recommendations based upon design reviews and simulation results</li><li>Guiding connector design and component qualifications from a signal integrity standpoint.&nbsp;</li><li>Making data driven decisions about the product functionality and areas for improvement.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering; Masters Degree preferred</li><li>Minimum of 10 years of relevant work experience in electrical Design, RF design or PCB design</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior&nbsp;</li><li>Expert with Signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools)</li><li>Expert with 3D CAD tools (SpaceClaim preferred, AutoCAD, Creo, or equivalent)</li><li>Expert with high-speed test equipment (VNA, TDR, BERT)</li><li>Expert with interconnect design or electronic packaging, with a preferred focus on high-speed differential connectors and/or cable assemblies, RF connectors, and channel integration.</li><li>Expert with printed circuit board layout and design (Altium preferred), fabrication and assembly, especially as associated with connector FP and card-edge interfaces</li><li>Proficient with data analysis techniques, appreciation for design geometry tolerance impacts, and HVM qualification.</li><li>Experience with physical layer communications systems and architectures.</li><li>Fluent in English (both verbal and written)&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Expert in analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.</li><li>Learning Capability: Open minded, coachable, willing to learn new skills, and motivated to grow</li><li>Pro-active in identifying complex situations, providing solutions, and driving improvements to evolving procedures</li><li>Experience writing technical papers and presenting to BU-level organizations, external conferences, and critical customer contacts</li><li>Proficient at owning project SI responsibilities and driving team actions across multi-discipline engineering &amp; manufacturing teams</li></ul>

Responsibilities: Quality Documents Preparation and Revise: <ul><li>DQIP Workmanship Control Plan.</li><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li><li>Setup &amp; FAAR。</li><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li><li>MSA (GRR) gage</li><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li><li>PFMEA，</li><li>Assure the process risk control basing on efficient PFMEA.</li><li>NCR &amp; QA instruction&nbsp;</li><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non-confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D TECHS - 8D report prepare and TECHS system handling.</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results</li></ul> Training: <ul><li>providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Bachelor degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>MSA、SPC、FACA</li><li>Familiar with quality management tools, such as MSA, SPC, FACA etc</li></ul>

Responsibilities: <ul><li>Has strong impact in Advanced Manufacturing Technology Roadmap driven development projects.</li><li>Drives for excellence in existing Stamping technologies and methods.</li><li>Strives to implement optimized or new manufacturing technologies to provide improved processes and tolerance control.</li><li>Act as a liaison between the Advance Manufacturing Process team and the manufacturing sites teams to collaborate with Product Development in the optimization of part and product designs for manufacturability, providing stamping simulation and process master knowledge and expert application of stamping processes to realize product samples and prototypes.</li><li>Provides stamping simulation and process master knowledge and project management to liaise the Advance Manufacturing Process team and the manufacturing sites teams, deploying optimized or new stamping processes to realize advanced manufacturing technology development projects.</li><li>Acts as the binding element between product development and advanced manufacturing &amp; process engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Designs, develops, and qualifies stamping processes in compliance with company EH&amp;S, quality and production standards, as well as recognized best in class and industry standards.</li><li>Documents all related processes in applicable company systems.</li><li>Supports supply chain to verify related suppliers’ compliance and capability.</li><li>Initiates and implements stamping related programs to continuously improve quality, cost and cycle time.</li><li>Maintains and adheres to all appropriate specifications, regulatory and customer requirements.</li><li>Applies stamping process mastery to resolve significant / unique / complex issues, where analysis of situations or data requires an in-depth evaluation of variable factors.</li><li>Exercises considerable latitude in determining objectives and approaches to assignment, performing work without appreciable direction.</li><li>Drives results primarily through collaboration and influence, not through direct reporting relationships.</li><li>Provides training and mentorship to other professional employees.</li><li>Provides measurable input to the objectives and goals of the department in support of the function and business unit strategies.</li></ul> Requirements: <ul><li>Minimum 12 years of related experience.</li><li>Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.</li><li>Demonstrates stamping simulation and process mastery (tool design, process optimization, capability, troubleshooting).</li><li>Tight tolerance electrical connector experience is a plus!</li><li>Working knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!</li><li>Fluent in English (read, write, and speak).</li><li>Broad knowledge of stamping, plating, and assembly processes for connectors and sockets is desired.</li><li>Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;</li><li>Broad project management skill and experience – Ability to work on several projects at once.</li><li>Based in China-Qingdao or the Philippines-Batangas mfg. sites and willingness to travel up to 25% average.</li></ul>

Responsibilities: <ul><li>Lead the design and implementation of hybrid cloud architectures using Azure, VMware, and HCI platforms like Nutanix and Azure Stack HCI.</li><li>Provide strategic consulting on cloud migration, optimization, and best practices.</li><li>Manage and administer the hybrid cloud environment, including, provisioning, configuration, performance monitoring, policy governance and security.</li><li>Collaborate with development, operations, and security teams to ensure seamless integration and deployment of cloud services.</li><li>Good Knowledge on Cloud Adoption Framework (CAF) and Well Architecture Framework (WAF)</li><li>Experience with Microsoft Entra ID Connect, Azure AD DS, and related technologies.</li><li>Implementation and management of Public and internal DNS server.</li><li>Monitor and optimize cloud performance, cost, and security.</li><li>Automate infrastructure provisioning, configuration, and management using tools like ARM templates, Terraform, and PowerShell and Ansible.</li><li>Familiarity with CI/CD pipelines and DevOps practices.</li><li>Troubleshoot and resolve issues related to hybrid cloud infrastructure and services.</li><li>Implement and maintain disaster recovery and backup solutions.</li><li>Stay up to date with the latest cloud services, features, and best practices.</li><li>Comprehensive understanding of Identity and Access Management principles and practices.</li><li>Designing and implementing IAM policies to ensure secure and efficient user access management.</li><li>Create and maintain comprehensive documentation for VMware environments, including configurations, procedures, and troubleshooting guides.</li><li>Provide advanced troubleshooting for complex issues within the VMware infrastructure.</li></ul> Requirements: <ul><li>Bachelor’s degree in computer science, Information Technology, or a related field.</li><li>Minimum of 5-8 years of experience in cloud engineering and consulting, with a strong focus on Azure, VMware, and HCI platforms.</li><li>Strong knowledge of Azure services, including virtual machines, storage, networking, SQL PaaS, and security.</li><li>Demonstrated expertise in designing and implementing hybrid cloud solutions.</li><li>Proficiency in backup tools and disaster recovery planning.</li><li>Exceptional problem-solving skills and strategic thinking abilities.</li><li>Excellent communication and interpersonal skills, with the ability to articulate complex technical concepts to diverse audiences.</li><li>Relevant certifications (e.g., Microsoft Certified: Azure Solutions Architect, VMware Certified Design Expert, Nutanix) are highly desirable</li><li>Experience in deployment and configuration of VEEAM backup and replication tool.</li><li>Skilled in NetApp Storage Administration, capacity planning.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Strong general Linux administration skills including Shell scripting/Powershell</li></ul>

Skills

Industry

Location

Jobtitle

25 tool fabrication Jobs found

Manufacturing Engineer

Technical Support Engineer

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

120368 Senior Manufacturing Engineer

125112 Vision System Engineer

Principal Signal Integrity Engineer

125112 Assembly Vision System Engineer

118175 Molding Manufacturing & Process Development Engineer

Cloud Infrastructure Engineer III

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

25 tool fabrication Jobs found

Manufacturing Engineer

Technical Support Engineer

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

120368 Senior Manufacturing Engineer

125112 Vision System Engineer

Principal Signal Integrity Engineer

125112 Assembly Vision System Engineer

118175 Molding Manufacturing & Process Development Engineer

Cloud Infrastructure Engineer III

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.