Instrument Technician

Process Engineering -SAGO

Process Engineering

ASC - Technical Safety (Process Safety)

Process Engineer - Utilities ( GM )

Control System Engineer

Turnaround & Inspection Engineer

Process Engineer - Sulfur Recovery / Sour Water Stripper

Instrumentation & Process Control Engineer

Responsibilities:Routine Duties:Carryout maintenance activities in an efficient manner, in line with the annual business plans, and departmental policies and procedures.Complete all assignment of tasks, performance appraisal, training, and maintain proper tools and equipment in order to make sure the unit equipment perform reliably.Carryout troubleshooting of problems occurring in the units and implement corrective actions.Shutdowns and Turnarounds:Assist in planning, organising, and implementing shutdowns, turnarounds, and emergencies in order to ensure safe and timely execution of tasks.Assist in identification of shutdown and turnaround activities, spare, scheduling and JSA.Plant Maintenance:Ensure that work processes are implemented as per standards and procedures.Maintain high level of availability of the instrumentation within area of responsibility.Identifies spare parts requirement of each equipment. Identifies required special tools to carry out his activities.Requirements:Min 3 - 5 years of experience in Oil and Gas, Chemical OR Petrochemical industry.Bachelor/ Diploma in Electronics and Instrumentation OR Electronics and Communication.

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (10) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:You will be required to perform the following:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilities.Develop, review and/or validate plant mass balances.Check plant performance to ensure it is running up to its design.Look for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation.Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing procedures.Conduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance test.Evaluate the catalyst recovery performance.Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses.Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation.Lead process and equipment optimization studies.Lead feasibility studies.Lead PHA and HAZOP studiesInitiate and coordinate ESA's.Develop implementation plan for critical recommendations.Ensure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studies.Lead Energy Optimization / Conservation studies.Initiate process safety relief audit studies.Lead Water conservation studies.perform management of change (MOC).verify system operations and performance after implementing the recommendations.Requirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Role Description:We are seeking a Technical Safety (Process Safety) Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.Your primary role as a Technical Safety Engineer is to work with key stakeholder organizations to provide technical guidance on facility design requirements pertaining to fire prevention and process safety engineering areas, including but not limited to firewater systems, fireproofing, emergency shutdown systems, drainage systems, tank designs, electrical classifications, pipeline design factors, equipment access and layout, spacing, risk areas.Responsibilities:As the successful candidate, you will have the requisite knowledge, skills, and experience to:Provide technical guidance and develop procedures for all company organizations on fire prevention and process safety engineering in facilities design and related operational requirements, including company and international standards (e.g., NFPA, API).Review all new projects to ensure conformance to company and international engineering standards; represent LP at project proposal meetings, and provide continuing guidance through design, construction, and commissioning.Provide company-wide technical guidance and assistance during design-related surveys of facilities for adequacy of design, operations and maintenance.Analyze fires and process safety incidents both in the industry and to determine causes and whether company standards or other requirements require update or changes, or whether other remedial measures should be considered.Initiate and participate in studies to resolve specific problems outside currently available technology.Develop training programs in the field of process safety and fire prevention engineering and provide training assistance as required.Use risk analysis techniques to identify corporate risk exposure and develop cost-effective solutions.Assist in surveys of operations by insurance, Government, and other outside agencies, and act as the Company expert on fire prevention engineering standard requirements.Mentor other LP personnel.Requirements:As the successful candidate, you will hold a bachelor's degree in chemical engineering or fire protection engineering, and ten years of relevant industry experience in the oil and gas, petrochemicals, or related industries, five of which focused on addressing technical safety and fire prevention engineering issues.Professional Engineering licensing/certification/registration in Fire Protection Engineering, or an advanced degree is highly desirable.You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.Working Environment:Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.We have a proud history of educating and training our workforce over many decades.Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:As the successful candidate you will be required to perform the following:Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.Issue quarterly utilities performance bench marking reports highlighting the KPIs, analysis, and performance improvement recommendations.Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance bench marking reports.Conduct bench marking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives through operational adjustment or design modification.Conduct internal assessments on Utilities using our client engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our client Central Engineering.Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.Requirements:You must hold a Bachelor’s degree in Chemical Engineering or related specialization. You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.Exposure to major equipment suppliers / package units for Utilities is preferred.

Responsibilities:Supervise the activities and work performed by direct reports to ensure that are carried out in an efficient and effective manner, in line with the annual business plans, and departmental policies and procedures.Recommend training and development interventions for team members to build their capabilities.Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.Monitor performance, identify upgrade needs, collect, analyze, and interpret performance data to ensure optimal control systems performance.Monitor and participate in control system installation, modification, and upgrades to ensure effective implementation.Work closely with Procurement team in the identification of upgrade requirements, technical qualification of vendors and final selection to ensure that services provided meet Q-Chem needs and standards.Modify the control systems throughout the plants, by installing all parameters, carrying out procedures as per set guidelines and practices to ensure smooth operations.Prepare spare parts management requirements at all times and monitor inventory, especially prior to major planned overhauls to avoid and minimize control system disruptions.Plan and schedule the upgradation of DCS & SIS equipment and systems and ensure alignment of all relevant stakeholders to maintain DCS & SIS systems reliability and optimal operation.Participate in developing of process and instrumentation diagrams to support clear and effective operation of control systems.Prepare DCS & SIS system specifications to ensure accurate standardization of material.Prepare cost estimates for respective projects, review and approve documentation developed by contractors to ensure effective selection of contractors that would meet Q-Chem needs within allocated budgets.Work closely with ICS cybersecurity team to ensure all DCS & SIS assets are secured.Participating of keeping DCS & SIS assets working within the target security level.Policies, Systems, Processes & ProceduresContribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes, and practices considering ‘international leading practices’ to improve productivity and operational efficiency.Provide critical input to support the development of Section’s systems, policies, processes, and procedures to meet business requirements.Ensure team members comply with all Section’s policies, processes, standard operating procedures, and instructions so that work is carried out in a controlled and consistent manner.Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high-quality products/services.Requirements:Required (Qualification1 / Discipline): Bachelor’s degree in Electrical Engineering, Electronic Engineering, Process Control Engineering, Instrumentation Engineering, Engineering Technology, Physical Engineering.Preferred (Qualification1 / Discipline): Master’s degree in Electrical Engineering, Electronic Engineering, Process Control Engineering, Software systems Engineering, or any related discipline.Experience:Required (Years2 / Job Level3 / Industry): 5 – 7 years of experience in control system function preferably in O&G Industry.Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals Industry or DCS/SIS systems OEM experiences. 2-3 years at a similar position as Emerson control system engineer for our client II, Honeywell control system engineer for our client or Yokogawa control system engineer for RLOC and Triconex safety systems.Preferred: Functional Safety Engineer..ISA Certified Automation Professional® (CAP®) Certification.ICS Cybersecurity Fundamentals. 

Responsibilities:Prepare the budget for the yearly operating plan, and develop the Mid-Year and Year-End Accountability reports.Collect all T&I input recommendations; work lists; and projects from the OME team and assemble them together in an organized scope of work.Ensure preparation of detailed T&I schedules in the Critical Path Diagrams form and simple bar charts or with electronic scheduling software, such as Primavera, Microsoft Project, etc.Ensure shutdown and startup details activities are incorporated in the Primavera schedule, including the systems and equipment release schedule.Prepare lists of all expense project package and ensure all required expense projects are developed and approved.Lead contract procurement related to all expense projects.Ensure the planned scope meets the EIS schedule.Optimize the T&I schedule duration and cost.Follow-up on material and contracts procurement.Report planning progress to managementEnsure the T&I within the defined boundaries of cost, schedule and quality.Develop T&I execution plans.Facilitate scope of work meetings and scope of work challenges.Prepare and issue comprehensive post-T&I reports.Monitor accounting budgets vs. actuals for work requests, materials orders, etc.Requirements:You must hold a Bachelor degree in engineering, preferably in mechanical/industrial engineering.You should have a minimum of 10 years’ experience in Turnaround events in the Oil & Gas Industry, preferably within the downstream sector (Petrochemical or Refinery).You should be able to demonstrate an overall knowledge of T&I planning and execution management.Experience in T&I planning software such Primavera P6 is essential. (Roser also preferred).

Responsibilities:Review and monitor the performances of existing SRU & SWS facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. Issue quarterly SRU & SWS performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.  Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.  Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having SRU & SWS process technologies. Execution and deliverables of the workshops will be based on Benchmarking & Best Practices Exchange Agreement among Global Manufacturing facilities.  Issue by-monthly SRU & SWS technical best practices bulletin for sharing within Global Manufacturing facilities. Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of SRU & SWS which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned. In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification. Conduct internal assessments on SRU & SWS process engineering standards using  engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or  Central Engineering. Support the implementation of relevant engineering standards to SRU & SWS across Global Manufacturing upon each facility management’s approval. Act as the Admin Area overall coordinator for cascading and driving Global Manufacturing and Corporate programs to the operating facilities for execution and effective monitoring. Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations. Recommend and coordinate proven technology deployments in SRU & SWS process units. Liaise with Global Manufacturing Excellence-Manufacturing Technical Support Division and Engineering Services for any technology assessment and piloting support. Participate as subject matter experts on external benchmarking with 3rd party entities, which include but not limited to, Japan Cooperation Council Petroleum (JCCP) and Gulf Downstream Association (GDA). Participate in SRU & SWS hazard operability (HAZOP) and safety integrity level (SIL) studies as required by operating facilities. Participate in incident investigation activities concerning SRU & SWS process technologies as required by operating facilities. Act as overall coordinator on any SRU & SWS data required by Global Manufacturing Affiliate Affairs from  wholly-owned facilities.Requirements:You must have a Bachelor’s degree in Chemical Engineering or related specialization. An advanced degree is preferred.You should have a minimum of 15 years total refinery or gas plants process units experience (process engineering and operations) with at least 10 years’ experience in handling SRUs/TGTU/SWS plants.Exposure to different SRU/TGTU process licensor technologies is a plus.

Responsibilities:Execute capital projects according to the scope, schedule and budget.Perform complex technical and administrative tasks relative to the Design and coordination of specialized controls and instrumentation systems.Provide technical input and review of the design, construction, pre-commissioning, commissioning and startup of facilities. Address technical issues arising in all phases of the project development related to Instrumentation & Process Control parts of the facilities.Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.Review and provide input to the Functional Specification for PCS and Field Instrumentation that fully comply with our client standards and specifications.Manage General Engineering Services (GES) design contractor activities during the development of Pre-FEED & FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Be familiar with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.Full understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to support project manager and/or company representative in timely completion of projects. Review and resolve day to day contractors’ activities related to assigned project (process) work during construction and ensure HSE compliance.Participate in developing Instrumentation & Process Control deliverables and others such as BDs, SLDs, P&IDs, ILDs, ISDs, ISS, C&E diagrams, HAZID, HAZOP, SIL, simulations, control narrative, energy optimization, startup plans, etc.Provide design input in the identification, sizing, selection and procurement of field instrumentation including control valves. Attend Factory Acceptance Test (FAT) of the Process Control System and resolve any technical issue prior of shipment to site. Conduct Site Acceptance Test (SAT) and Integration Site Acceptance Test (ISAT) for all Process Control System and resolve any technical issues that arise.Perform change order scope definition, cost estimation and assist the Project Manager or Company representative in change management process.Review weekly and monthly reports on the status and progress of the contracts, including project costs and schedule. Attend project meetings e.g. progress, stakeholders, design review, plot plan, value improvement. Review of project schedule, coordinate and monitor the assigned project progress and challenge below par performance of the contractor. Review, coordinate, and monitor invoices (claimed vs actual physical progress checks) and contractor’s submittals. Perform Project Reporting and implementation of company initiatives during project execution.Review design/study Instrumentation & Process Control modifications to the facilities.Provide routine Instrumentation & Process Control (design and construction) support to facilities.Develop and/or review testing and commissioning procedures for Instrumentation & Process Control equipment especially in the facilities.Be familiar with leading equipment manufacturers/vendors, international standards and value improvement practices.Requirements:As a successful candidate, you will hold a Bachelor’s Degree in Electrical/Electronics/Instrumentation Engineering from a recognized and approved program.You will have a minimum of (15) years of experience in the refining and the petrochemical industries with a specialty in Instrumentation & Process Control, including five (5) years of field experience in construction, pre-commissioning, commissioning, startup, and operation.You will also have;Engineering Design & Construction phase experience with a thorough knowledge of engineering practices and economic principles in the applicable International Codes, Standards and Specifications.Expertise in specific control & instrumentation disciplines such as Advanced process control (APC), Distributed control systems (DCS), Programmable logic controllers (PLC), Supervisory control and data acquisition (SCADA), Emergency shutdown system (ESD) & etc.

Skills

Industry

Location

Jobtitle

14 shutdown Jobs found

Instrument Technician

Process Engineering -SAGO

Process Engineering

ASC - Technical Safety (Process Safety)

Process Engineering

Process Engineer - Utilities ( GM )

Control System Engineer

Turnaround & Inspection Engineer

Process Engineer - Sulfur Recovery / Sour Water Stripper

Instrumentation & Process Control Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

14 shutdown Jobs found

Instrument Technician

Process Engineering -SAGO

Process Engineering

ASC - Technical Safety (Process Safety)

Process Engineering

Process Engineer - Utilities ( GM )

Control System Engineer

Turnaround & Inspection Engineer

Process Engineer - Sulfur Recovery / Sour Water Stripper

Instrumentation & Process Control Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.