EHS Manager

SAP Senior Software Engineer (Hybrid)

CNC Machinist IV

Test Laboratory Engineer

Plant Quality Improvement Manager

Logistics Supervisor

Supply Chain Manager

Technical Support Engineer

Technical Support Manager

Staff Quality & Reliability Engineer

Responsibilities: <ul><li>Reports to EHS site Manager and Construction Project Manager all EHS related issues, concerns, improvements with a goal on achieving leading indicators and ZERO Recordable Incident Rate. </li><li>Ensure EHS compliance to all legal and other requirements associated with regulatory, local and other requirements.</li><li>Facilitates risk assessment to identify critical safety or health hazards and environmental aspects per company standard/spec and local regulatory standards.</li><li>Works with Project Management Team and Contractor’s leadership team to create targets and objectives based on key EHS risks.</li><li>Verify the EHS plan from Project Management company (PM), and work with PM to validate EHS plan from general contractor (GC).</li><li>Manages and directs construction site in achieving EHS targets &amp; objectives.</li><li>Involve in design review and make sure safety lesson learned are considered in new building design.</li><li>Pro-actively drives and promotes EHS culture throughout the construction site, e.g. by driving leading indicators.</li><li>Ensure zero tolerance culture is developed, recognition plan and discipline actions are in place and effective, and discipline actions well followed for unsafety behavior at construction site.</li><li>Drive construction EHS through close coordination with management team, safety leaders and EHS officers of company project management team, PM, GC, subcontractor per their scope of work, EHS plan, etc.</li><li>Organize regular EHS performance review to PM and GC EHS leaders per SOW and EHS plan, provide in time feedback to company project management team and leaders of PM and GC.</li><li>Report all EH&amp;S data and information as required by company. Use established EHS data processes such as Velocity to manage data such as injuries and illnesses, environmental metrics, risk assessments, EHS action items and other pertinent information.</li><li>Working with Construction project management team to develop management of change program at construction site.</li><li>For example, design change may trigger additional actions for safety, or to monitor and follow EHS law and regulatory revisions and report to EHS manager and Project Manager for actions required.</li><li>Training shall be delivered to leaders of project team, PM and GC about related safety alerts, new specifications and requirement from company, etc.</li><li>Work with site EHS leader and Construction Project Manager to prepare, submit and disseminate information in compliance with regulatory agencies in order to ensure timely submittals.</li><li>Work with Project and Construction Management team to ensure that all key EHS operational controls are in place and that EHS action items are resolved on a timely basis.</li><li>Strict Supervision of all contractor activities with PM in order to ensure compliance with EHS Work Permit.</li><li>Ensure emergency preparedness is in place, e.g. Construction Emergency Response Team ready to deploy in the events of fire, earthquake and strong typhoon.</li></ul> Requirements: <ul><li>College degree, major in Environmental, Safety, Chemical, Electrical, Mechanical, Civil Engineering or relevant.</li><li>5 years minimum as manager or can consider 10 years as safety supervisor / senior engineer.</li><li>Actual experience as Safety Officer or Pollution Control Officer role is an advantage.</li><li>Experience in working with multinational company local or in abroad.</li><li>Comfortable to Speak and write English to all level of organization.</li><li>Demonstrated ability in conducting EH&amp;S audits and inspections.</li></ul>

Responsibilities: <ul><li>Apply software engineering patterns and principles to design, develop, test, integrate, maintain and troubleshoot complex and varied software solutions and incorporate security practices in newly developed and maintained applications.</li><li>Participate in peer code review sessions to review code, coach peers and ensure code quality.</li><li>Take the lead in the assigned agile team to adopt agile philosophies, facilitate agile ceremonies and identify continuous improvement opportunities.</li><li>Incorporate the companys engineering and development best practices within the full software development lifecycle including coding standards, code reviews, source control management, building processes, testing and security principles, to deliver high quality code rapidly.</li><li>Collaborate to lead demonstration and continuous feedback sessions to improve development and help drive the long term vision.</li><li>Participate in the engineering community by maintaining and sharing relevant technical approaches and modern skills.</li><li>Independently handle complex issues with minimal supervision, while escalating only the most complex issues to appropriate staff.</li><li>Other duties as assigned</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in a related field or equivalent experience</li><li>Confirmed experience automating pipelines for continuous integration, testing, delivery and security</li><li>Confirmed experience architecting applications, databases, services or integrations</li><li>Minimum of four years of related work experience</li></ul> Preferred Qualifications <ul><li>Experience within SAP ABAP, Fiori, and OOP</li><li>Experience with Enhancement framework, CDS Views, AMDP, BOPF</li><li>Experience with Odata, Web Services, PI/PO, MII, ALE, and idoc</li><li>Experience with Adobe forms</li><li>Exposure to Agricultural Commodity Management (ACM) or prior experience with Commodity Trading and Settlement.</li></ul>

Responsibilities : <ul><li>Set-up a range of 3, 4, and 5 axis CNC machine tools by installing and adjusting work holding devices, tooling, spindle liners and bar feeders.</li><li>Operate a range of 3, 4, and 5 axis CNC machine tools, ensuring that machine down time is minimised.</li><li>Verify programs and settings using a range of measuring equipment on first articles and apply appropriate adjustments and program modifications.</li><li>Ensure component compliance in accordance with engineering drawings and quality procedures using a range of inspection equipment.</li><li>Record daily operations on machine tools and provide operational equipment effectiveness (OEE) results daily.</li><li>Contribute to continuous improvement activities within the department. Improving processes and applying tools and methods from the our client site plan.</li><li>Maintain and improve time standards.</li><li>Ensure that daily maintenance is carried out as required.</li><li>Maintain a high level of housekeeping.</li><li>Observe health and safety regulations as laid down in company procedures and government legislation.</li><li>Adhere to company procedure at all times.</li><li>To support with any other ad-hoc tasks where required</li><li>To carry out any other reasonable tasks as may be requested from time to time by the business within Production or elsewhere as may be required.</li></ul> Requirements : <ul><li>Time served apprentice with C&amp;G/NVQ or equivalent in mechanical engineering discipline.</li><li>Experience working on alternating early/late shifts with minimal supervision.</li><li>Experience setting and operating 3, 4 and 5 axis CNC machine tools.</li><li>Experience of Fanuc, Citizen and Mazatrol is desirable.</li><li>Ability to interpret engineering drawings.</li><li>Experience using a range of measurement equipment.</li><li>Ensure compliance with all our client policies and procedures, EHS and safety first together with delivering exception ECE.</li><li>Driving and encouraging the values and key behaviours in all actions</li><li>Highest level of accuracy/attention to detail, to ensure standards of work are exemplary with minimal defect.</li><li>Organized and self-motivated to work with minimal supervision.</li><li>Demonstrate initiative, flexibility and willingness to take on additional tasks and responsibility in an efficient manner.</li><li>Excellent communication at all levels both internally and externally.</li><li>Fully flexible with tasks and the ability to multi-skill.</li></ul>

Responsibilities : <ul><li>Conduct electrical, mechanical, and environmental testing on our client products for the purpose of Engineering Evaluation and Qualification.</li><li>Prepare samples using hand tools and soldering.</li><li>Run a variety of computer and microprocessor-controlled test equipment.</li><li>Set-up &amp; operate environmental, mechanical and electrical test equipment</li><li>Review and summarize data.</li><li>Maintain the integrity of test results by complying with Corporate, Business Unit and local quality system requirements.</li><li>Review active test programs and final test results to ensure that performance requirements are met.</li><li>Capable of working to specifications, drawings, diagrams, and schematics.</li><li>Ensure all safety requirements are met and followed</li><li>Write test documentation and reports.</li><li>Perform other duties as assigned by management.</li><li>Overtime or temporary shift in hours may be required at times to support high priority business needs.</li></ul> Requirements : <ul><li>A preferred candidate should have, or be actively pursuing, an HNC or equivalent in Electronic or Mechanical Engineering, or have 3-5 years’ experience in testing.</li><li>Background of mechanical experience to aid fixture design and construction.</li><li>Good soldering skills and manual dexterity.</li><li>Hands on experience for tearing apart assemblies / sub-assemblies of electro mechanical parts</li><li>Good Conceptual, problem solving and Analytical Skills</li><li>Excellent verbal and written communication skills.</li><li>Excellent attention to detail</li><li>Knowledge of Six Sigma tools will be an added advantage</li><li>Proficient in MS Office Suite</li><li>Ability to work in a hands-on environment.</li><li>Ability to work well with others of diverse backgrounds.</li><li>Knowledge of Global Certifications and Regulatory Standards (UL, IEC, MIL etc.) is an advantage</li><li>Must be capable of multitasking and taking full ownership of assigned projects.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or UK Military controls.</li></ul>

Responsibilities: <ul><li>Leader in ASEAN Problem Solving (PS) Committee. Organize regular meetings to review status &amp; planning.</li><li>Promote PS culture throughout the Plant and ASEAN at all levels.</li><li>Promote the selection of the projects that will have the highest impact on plant metrics (eg. CoPQ) and manage all PS projects including PS initiatives from Line QRM escalation to VSM/Plant Level.</li><li>Support production improvement process through PS projects.</li><li>Lead cross-functional team to apply diligently a structured problem-solving methodology that best fits the situation (Shainin, SPS, Six Sigma, or other equivalent methods as described by the Shifting Gears)</li><li>Follow up on all PS projects with the project owner and provide coaching to ensure PS methodologies are correctly applied.</li><li>Regular project coaching with PS Master from Global, and follow-up to project closure and realize savings.</li><li>Proactively anticipate roadblocks to find solutions and escalate when needed.</li><li>Report out project progress, people development, and savings to the PS Committee and Management.</li><li>Tabulate and manage Plant/ASEAN people PS skill matrix and identify training needs, plan &amp; execution.</li><li>Coach, Develop, and Expand Local Problem Solver Practitioners.</li><li>Represent ASEAN in PS matters and report status to regional and global levels.</li><li>Alignment with AP and Global PS leaders for new PS initiatives and execution.</li><li>Any other assignments as delegated by the reporting Manager</li></ul> Requirements: <ul><li>Engineering degree (Mechanical or Electrical Engineering)&nbsp;</li><li>Strong understanding of 6 Sigma tools and Minitab usage</li><li>Strong understanding of engineering fundamentals and product design</li><li>Experience in taking project using structured problem-solving methodology (Shainin Red-X, 6 Sigma, etc)</li><li>Experience in coaching and training.</li><li>Good English speaking and writing skills.</li><li>Strong attention to details, with skills.</li><li>Leadership skills and strong business acumen</li><li>Good interpersonal skill to work with people at different levels</li><li>Be a positive change agent</li><li>Innovative and creative mindset, and open to change with inclusion value.</li><li>Uphold high standards of ethics, integrity, and accountability value analytical</li></ul>

Responsibilities: <ul><li>People Management and People Leader&nbsp;</li><li>PEZA, Customs and All Government Offices Management Related to Plant and Transportation (International and Local)</li><li>Escalation for transportation, Inbound and Outbound logistics operations.</li><li>Global Trade Compliance interaction with trade people to make sure all shipments are compliant from origin and destination side</li><li>Global Supply Chain Management&nbsp;</li><li>Escalation point person for all of shipments to ensure the compliance on regulations</li><li>Monitoring of the deliveries, handling insurance coverages, duties as well as tax obligations</li><li>Designing and implementing all export and import strategies and preparing effective business plans Resolving the queries of the clients related to export and import process and expenses.</li><li>Interact with customers/clients face to face or over the phone and foster and develop relationships with customers/clients</li><li>Review and Approval of all incoming bill of lading with attention to discrepancies.</li><li>Audits bill of lading to ensure billing requirements are met.</li></ul> Requirements: <ul><li>Bachelors Degree in Supply Chain, Industrial Engineering</li><li>Monitoring of performance of all forwarders, couriers and service providers related to Transportation</li><li>SOP and SOW Management&nbsp;</li><li>Communication and Coordination with PEZA, Customs, PDEA, Brokers, Consultants and other government agencies as needed.</li><li>On time Renewal of all government requirements for shipment purposes</li><li>Reports and Analysis on Freight Spend and Transportation improvement programs</li><li>Cost Savings&nbsp;</li><li>Meeting all the compliances related to regulatory and corporate requirements</li><li>Follows rules and regulations EHS, GST etc.</li><li>Environmental health and safety associated with his responsibilities</li></ul>

Responsibilities: <ul><li>Analyze forecast signals from the Demand Planning team to generate an optimized build plan while ensuring effective communication across extended supply chain.</li><li>Lead the MPS function to optimize the production plan with the aim to support customer demand, optimize production utilization and balancing inventory in a targeted manner.</li><li>Lead the Material Planning team ensuring implementation of production plan of work centers, machines, or processes to meet customer requests.</li><li>Monitor MRP system setup, identify capacity constraints and proactively expand drive capacity to avoid supply and demand gaps.</li><li>Ensure appropriate parameter settings, system settings and system usage.</li><li>Lead the Materials Analyst team ensuring the right amount of material is procured within the appropriate timing.</li><li>Develop standards for materials management including appropriate levels of safety stock, in-process inventory, and finished goods.</li><li>Handles the disposition of obsolete inventories according to the company’s policy.&nbsp;</li><li>Oversee and supervise physical inventories.</li><li>Active participation in monthly Supply Review Meeting, identifying risks and opportunities and ensuring necessary proactive measures are taken to close gaps to meet budgets.</li><li>Develop new and existing relationships with suppliers.</li><li>Coordinate information flow between planning, warehouse, and production teams.</li><li>Lead, manage, motivate, and develop Supply chain team.</li><li>Proactively approach other functions within Demand Planning, Customer Service and Supply Chain for end-to end optimization.</li><li>Accountable for the timely and accurately execution at the shipping and receiving areas.</li><li>Track and control supply chain KPIs including corrective measure to management on regularly base.</li><li>Improve the overall supply chain performance and look for any possible innovations to the process.</li></ul> Requirements: What your background should look like: <ul><li>Bachelor’s degree and 8+ years’ Supply Chain / Materials Planning experience, including 3+ years in a leadership role.</li><li>People with no degree, but equivalent level of qualification in relevant disciplines, will also be considered.</li><li>Experience in working with ERP systems and other IT systems at customer interface, e.g. SAP,&nbsp;&nbsp;EDI.</li><li>Experience with high mix, low volume manufacturing.</li><li>Good communication skills, able to build customer relations and win customers for own ideas.</li><li>Strong analytical, problem-solving, and decision-making skills.</li><li>Process Improvement.</li></ul> Competencies: <ul><li>Motivating Others.</li><li>Building Effective Teams.</li><li>Managing and Measuring Work.</li><li>Values: Integrity, Accountability, Inclusion, Innovation, Teamwork.</li><li>SET: Strategy, Execution, Talent (for managers).</li></ul>

Overview:&nbsp; <ul><li>You shall be a part of the Technical Support Center (based out in Pune, India).</li><li>The Technical Support Center is a team of highly responsive technology specialists whose #1 focus is to</li><li>support/resolve the customers for Presales and Post Sales Technical issues while delivering the best</li><li>possible customer experience.&nbsp;</li><li>You can measure your success through excellent financial results, growing</li><li>customer happiness metrics, industry recognition, on time resolution and employee happiness scores.</li><li>You shall be the first point of contact for customers and partners all over Americas, EMEA &amp; APAC.</li><li>Youll have insight on the detailed functionality of products and partner with all distributed</li><li>elements of the service chain.</li></ul> Responsibilities: <ul><li>You will be responsible for creating and driving support tickets within the required SLA parameters.</li><li>will depend on you to provide the highest standard of customer support for Switching, routing</li><li>,security , Wireless, Cables &amp; Connectivity.</li><li>Remotely provide Presales as well as Post sales support making sure the customer is satisfied with the level of service provided. Manage the tech support day-to-day operations to achieve qualitative and quantitative targets at team/staff level and to maintain overall quality standards.</li><li>You shall be responsible for achieving all metrics for the respective customer/partner, as defined by the management with particular focus on customer satisfaction. </li><li>Gather the required information necessary to best handle customer software and technical inquiries.</li><li>Resolving the issues through Phone, chat and ticketing tool - communication channels.&nbsp;</li><li>Collaborate with Technical Support team members to properly manage customer queries and escalate when appropriate.</li><li>Document solutions for knowledgebase.</li><li>Work to support customer technical issues encompassing hardware, software, and networking.&nbsp;</li><li>Create knowledge base articles on products.</li><li>Connect with wide range of people and teams to find these solutions such as Solution Consultants,Product Line Managers, and the various plants.</li><li>Provide technical service for products and solutions in India and deliver professionally and</li><li>disciplinarily.</li><li>Deliver end to end solution as per customer demand.</li><li>Assist customers with Support Requests and engaging with other Teams ensuring follow up on each request and solution is provided.</li><li>Continuous improvement of their professional certification level.</li></ul> Requirements : <ul><li>Bachelor’s degree in Telecom, Computer Science, Electrical Engineering/Electronics/ IT.</li><li>CCNA Certified. Hirschmann switches, router and security devices knowledge would be added</li><li>advantage.</li><li>Minimum 3-10 years working experience.</li><li>2~3 year’s implementation experience in Managed and unmanaged switches, Internet wireless LAN,</li><li>Industrial Security Systems, Embedded Ethernet modules, Fiber optic field bus repeaters, Secure</li><li>remote access, Network Management Software, Industrial Connectors, industrial network security</li><li>products for process control, SCADA manufacturing and automation sectors.</li><li>Experience in customer support, service or after sales in networking system will be added advantage.</li><li>Understanding of networking protocols.</li><li>Knowledge of transmission technology, OTN and Network Access control would be a plus.</li><li>Hands-on experience with monitoring, network diagnostic and network analytics tools/network</li><li>configuration experience with Cisco etc.</li><li>Ability to quickly learn new or unfamiliar technology and products using documentation and internetresources.</li><li>Basic Level of understanding of Routing and Switching, Basic Data networking, including DHCP, RSTP, VLAN, QoS, IGMP, network redundancy, IP routing protocols and standard VPN technology.</li><li>Industrial networking and IIoT/IoT digitalization knowledge would be added advantage.</li><li>Good English in reading and written, and good oral English is a must.</li><li>Ability to multitask in a fast-paced environment.</li></ul>

Responsibilities: <ul><li>Coordinate scheduling of resources and tests to maximize lab utilization while meeting project deadlines and communicating them to (primarily internal) customers.</li><li>Lead and mentor a team of technicians and engineers, providing guidance, training, and support as needed.</li><li>Manage inventory of high voltage testing equipment, including procurement, maintenance, and retirement planning.</li><li>Ensure compliance with safety standards and regulations, implementing necessary policies and procedures to maintain a safe working environment.</li><li>Ensure compliance with audits such as ISO 17025.&nbsp;</li><li>Monitor project progress, identify potential issues, and implement solutions to ensure successful project completion</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering, Physics, or a related field; Master’s degree preferred.</li><li>8+ years’ experience with minimum 2+ years in high voltage testing 35kV+, and should have 2+ years’ in leadership role - preferably in an industrial or research setting; and laboratory experience required.</li><li>Proven project management abilities, including the ability to prioritize tasks, allocate resources, and meet deadlines.</li><li>Excellent leadership and communication skills, with the ability to effectively manage teams and collaborate with diverse stakeholders.</li><li>Understanding of electrical engineering principles, particularly in the areas of high voltage systems and insulation testing.</li><li>Familiarity with relevant standards and regulations, such as IEEE, IEC, ANSI, and NFPA.</li><li>Attention to detail and a commitment to quality, with the ability to troubleshoot problems and implement solutions in a timely manner.</li></ul>

Responsibilities: <ul><li>Quality and Reliability Engineering Teams analyze the ability of product and production systems to comply with customer and contractual requirements through established reliability factors.</li><li>They design, recommend revisions, and install quality control systems, develop, and document analytical methods for establishing the reliability of products and their components, and conduct analysis on relative reliability with regards to cost, structure, weight, maintainability, facility of production, and availability of materials and equipment.&nbsp;</li><li>They are responsible for policies and practices to comply with applicable government regulations and industry requirements related to product compliance, the implementation and management of technical and testing</li><li>standards and specifications, quality control and reliability programs governing materials, products, and processes, resulting in the optimization of material and labor, as well as failure analysis, root cause, corrective action, and customer communication.</li><li>Develop, implement, and maintain quality management systems (QMS) and reliability standards.</li><li>Design and conduct tests to validate product quality, performance, and durability.</li><li>Conduct root cause analysis (RCA) of product defects, failures, or non-conformance issues.</li><li>Ensure products meet industry standards and regulatory requirements (e.g., ISO, ASTM, or other applicable certifications).</li></ul> Requirements: <ul><li>10 or more years of experience in Quality or Reliability Engineering.</li><li>Bachelor’s degree in engineering, Quality, or a related technical field.</li><li>Demonstrated expertise in quality tools, practices, and procedures.</li><li>8D investigational experience required, including disposition of non-conforming materials, identification of root cause, and driving corrective action</li><li>Working knowledge of ISO 9000, and preferably AS9100.</li><li>MILSPEC experience required</li><li>Testing and reporting requirements.</li><li>Plating process knowledge preferred</li><li>First Article Inspection (FAI) inspection experience</li><li>Process control knowledge.</li><li>Ability to use testing and measurement equipment.</li><li>Successfully worked in a team environment assisting various departments requiring consistent quality assurance systems to succeed.</li><li>Ability to influence and drive cross-functional teamwork and work well with internal and external customers and other cultures.</li><li>Highly Desirable: Knowledge &amp; experience in acceptance and reliability testing of connectors or similar devices</li></ul>

Skills

Industry

Location

Jobtitle

135 safety standards Jobs found

EHS Manager

SAP Senior Software Engineer (Hybrid)

CNC Machinist IV

Test Laboratory Engineer

Plant Quality Improvement Manager

Logistics Supervisor

Supply Chain Manager

Technical Support Engineer

Technical Support Manager

Staff Quality & Reliability Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

135 safety standards Jobs found

EHS Manager

SAP Senior Software Engineer (Hybrid)

CNC Machinist IV

Test Laboratory Engineer

Plant Quality Improvement Manager

Logistics Supervisor

Supply Chain Manager

Technical Support Engineer

Technical Support Manager

Staff Quality & Reliability Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.