Process Engineering -SAGO

Process Engineering

Stationary Equipment Engineer

Mechanical Engineer

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (10) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:You will be required to perform the following:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilities.Develop, review and/or validate plant mass balances.Check plant performance to ensure it is running up to its design.Look for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation.Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing procedures.Conduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance test.Evaluate the catalyst recovery performance.Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses.Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation.Lead process and equipment optimization studies.Lead feasibility studies.Lead PHA and HAZOP studiesInitiate and coordinate ESA's.Develop implementation plan for critical recommendations.Ensure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studies.Lead Energy Optimization / Conservation studies.Initiate process safety relief audit studies.Lead Water conservation studies.perform management of change (MOC).verify system operations and performance after implementing the recommendations.Requirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:DUTY1 / effort % (020)Leads and recommends new continuous improvement solutions for installations or modifications to improve existing facilities and standardization within specific fields of endeavor. Estimates costs, prepares justifications and completes expenditure requests as required.DUTY2 / effort % (020)Leads the activities of project proposal that include development of scope, functions, interrelationship, integration, physical solution definition, cost estimate, etc.Leads project execution for project proposal, initiatives, studies and continuous improvement of solutions and problem solvers.DUTY3 / effort % (010)Plans, schedules and provides work direction for preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of challenging engineering problems.DUTY4 / effort % (010)Formulates the basis for engineering studies in any of several basic or special engineering fields by analyzing and evaluating all relevant data.Evaluates data as to scope, effect on existing installations, economic value, and long range planning and budgetary considerations.DUTY5 / effort % (010)Initiates detailed work outline and makes decision as to basic approaches, processes and/or equipment. Performs work and/or delegates work to other engineers for final development of specialized or technical proposals and proposed projects.DUTY6 / effort % (010)Brings all elements of a project together, makes certain that all elements proceed satisfactorily on schedule and within the allocated budget; and initiates corrective action as required. Reviews cost estimates, recommendation from vendors, engineering firms, and licensors.DUTY7 / effort % (010)Develops scope and description of technology items, and leads the implementation and operation of developed solutions in the field.DUTY8 / effort % (010)Reviews work of engineers directed. Checks that reports are written according to established methods of good report presentation. Makes recommendations for future study or report changes. Conducts peer-review of technical reports and reviews work of third party, technology reports, and engineering standards.Requirements:Educational Level :BachelorsDegree Title : Bachelor of ScienceDiscipline Title : Engineering

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Overview:We are seeking a Mechanical/Rotating Equipment Engineer to join our new Riyas NGL fractionation RNGLF Department. The RNGLF Facilities will include two fractionation trains which include fractionation units, C3 & C4 treatment, C3 & C4 dehydration and propane refrigeration. The common facilities will include feed surge and product storage, chemicals storage and utilities. Your primary role will be to lead the mechanical design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities. You will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, you will have a detailed understanding of product properties, customer applications and requirements. You must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions.Responsibilities:Provide day-to-day technical support to Operations and Maintenance to troubleshoot and fix rotating equipment and mechanical systems.Conduct failure analysis of rotating equipment and provide recommendationsAble to read vibrations spectrums and provide recommendations accordinglyDevelop the engineering designs packages for the new installation and upgrade projects.Review project proposals and detailed design packages for new facilities .Participate on the testing and commissioning of the new facilities and turnaround and inspection (T&I).Update and maintain engineering documentation and drawings.Analyze system performance and find solution for early failures and low performance of equipmentConduct performance of major rotating equipmentLead major rotating equipment overhauls or repair.Ensure quality, cost effective and timely solutions to any upgrade.Ensure full HSE compliance.Report and analyze key performance indices.Make recommendations for technical/economic optimization of existing facilities.Lead feasibility/profitability studies for new facilities.Assist in the training, development and mentoring of younger staff.Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to  capital investment decisions.Requirements:Bachelor's degree in mechanical engineering from an accredited university. A master’s degree is preferred.A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.You will have at least 10 years of experience in the industrial operation facility; a shale gas facility ispreferred. You should also have a good knowledge of the modular skids mounted unit.You must have a working knowledge of industry codes and standards, such as ASME and API, such as API-STD-610 and API-STD-617.You will have experience with creating/modifying PFDs, and P&IDs.You will have experience with troubleshooting and major repair of oil and gas rotating equipment, such as air compressors, pumps and diesel generators.You will have experience in creating schematics and piping diagrams.You must be able to conduct failure analysis and provide recommendations for failed rotating equipment.You will have experience with rotating equipment and piping field installation, commissioning and testing.You will have experience in specifying piping and equipment layout.You should be capable of communicating with multidiscipline engineers to complete projects. You must have proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organizationStrong written and oral communication skills are a requirement. 

Skills

Industry

Location

Jobtitle

5 refrigeration Jobs found

Process Engineering -SAGO

Process Engineering

Stationary Equipment Engineer

Process Engineering

Mechanical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

5 refrigeration Jobs found

Process Engineering -SAGO

Process Engineering

Stationary Equipment Engineer

Process Engineering

Mechanical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.