Civil & Structural Engineer

AOC - Planning & Performance Management Specialist

Process Safety Engineer

ASC- Environmental Engineer

Environmental Engineer

Process Simulation & Optimization Engineer ( GM )

Environmental Engineer ( GM )

Control System DCS (HGP)

Mechanical Engineer

Refinery Field Instrument Technician

Responsibilities:You will be required to perform the following:Execute capital projects according to the scope, schedule and budget.Perform complex technical and administrative tasks relative to the Design and coordination of civil & structural packages.Provide technical input and review of the design, construction, pre-commissioning, commissioning and startup of facilities.Address technical issues arising in all phases of the project development related to civil & structural packages of the facilities.Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.Review/provide input to the design of civil/structural packages that fully complies with standards and specifications.Manage GES design contractor activities during the development of Pre-FEED & FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Stay up to date with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.Have full understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to ensure timely completion of projects.Review and resolve day to day contractors’ activities related to assigned project work during construction and ensure HSE compliance.Participate in developing civil/structural packages deliverables and others such as plot plans, Piping Plans, foundation details, load assessments, stress analysis, Data Sheets, structural details, BRAs, geotechnical & soil tests, etc.Provide design input in identification, sizing, selection, procurement of civil/structural material.Provide design input to facilities such as pipe racks, substations, PIBs, control buildings, valve stations, process plants of Oil, Gas, refining, NGL, utilities etc.Perform change order scope definition, cost estimation and assist the PM or Company representative in change management process.Review weekly/monthly reports on the status/progress of contracts, including project costs and schedule. Attend project meetings e.g. progress, stakeholders, design review, value improvement.Review project schedule, coordinate/monitor assigned project progress and challenge below par performance of contractor.Review, coordinate, monitor invoices (claimed vs actual) and contractor’s submittals.Perform Project Reporting and implementation of company initiatives during project execution.Review design/study civil & structural modifications to the facilities.Provide routine civil & structural (design and construction) support to facilities.Develop and/or review testing procedures for civil & structural packages.Requirements:As the successful candidate you will hold a Bachelor’s degree in Civil/Structural Engineering from a recognized and approved program. An advanced degree is preferred.You will have fifteen years of experience in the Oil, Gas, and refining industries with a specialty in Civil & Structural Engineering, such that the incumbent is clearly recognized as an expert in this field, including at least five years of field

Role Description:Our partner occupies a unique position in the global energy industry. They are the world's largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance their value to society.Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.We are seeking a Planning & Performance Management Analyst to join Domestic Refining & NGL Fractionation (DR&NGLF) Admin Area Executive Office.DR&NGLF Admin Area manages and operates 4 wholly owned refineries, 4 Joint Venture refineries and 2 NGL Fractionation plants.You will perform analytical reviews of financials, operational analysis, planning and reporting activities such as budgeting, accountability, KPI reporting, cost control, contracts and technical or business analysis projects.Responsibilities:As the successful candidate you will be required to perform the following:Responsible for the preparation and design of management reports analyzing the Admin Area financial and non-financial performance.Develop techniques or mechanisms to dissect the refining business performance and provide advice on improvement actions.Offer analytical support for department on project evaluation and commercial arrangement economic assessment.Provide strategic analysis of business-related activities and coordinating administrative activities.Keep department/division head informed of special and unusual problems encountered, and provide problem-solving solutions.Take initiatives to improve the team’s process and provide work direction to other analysts, clerical and/or administrative staff.Requirements:You must hold a Bachelor’s degree in business, engineering or related discipline.You should have a minimum of 10 years related downstream experience, refining and/or refined product sales and marketing experience preferred.Possession of an advanced business degree (e.g., MBA), relevant professional certification (e.g., CMA, CFA, CPA) is preferred.Demonstrated capability and track record in the practice of planning & performance management and proficiency in the use of Microsoft Office tools are required.Experience in Linear Programming is preferred.

Responsibilities:We are seeking a Process Safety Engineer to join our Juaymah NGL Fractionation Department. JNGLFD is one of the largest NGL Fractionation centers worldwide that is responsible for providing fractionated feedstock to the petrochemical industry.Your primary role will be the development, maintenance and implementation of the company safety management system, environmental management system and support project activities during detail design, construction and commissioning phase of the project.As the successful candidate you will be required to perform the following:Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.Identify and evaluate hazardous conditions and practices in the workplace.Undertake surveys to identify and evaluate occupational health, safety and environmental conditions. Participate in various process safety studies/activities, such as: PHAs, HAZOPs, JSAs, PSSR, SIMOPs, incident investigations, compliance reviews, or insurance surveys.Participate in or lead risk studies and conduct consequence analyses, and review engineering designs for compliance with company and industry safety standards.Conduct and coordinate on-site inspections to audit physical conditions and safe work practices.Provide advice and counsel concerning compliance with corporate safety regulation and procedures. Perform work permit reviews, behavior-based safety inspections, job site safety compliance inspections, including hazard analyses and safe work procedures, and prepare written reports and recommendations.Develop controls for identified hazards and coordinate the implementation of controls from results of hazard analyses.Requirements:As the successful candidate you will hold a Bachelor’s degree in Safety, Chemical or Mechanical from a recognized and approved program.You should have a minimum of 8 years’ experience in refining /oil and gas plants /petrochemical industries.You must be able to demonstrate efficiency in the codes and standards in the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.You should have working knowledge of oil/gas-related plant processes.You should have familiarity with development of process safety roadmap, and setting targets of safety key performance indicators.

Responsibilities:As the successful candidate you will required to perform the following:Monitor facility operating and business plans objectives to ensure we are consistent and in-line with environmental protection policy and all applicable environmental policies, GIs and standards.Identify deviations and develop solutions to environmental problems to ensure mitigation of facilities environmental risk and improve compliance to company and governmental environmental regulations.Develop, review and implement Green House Gas management program including GHG data collection, analysis and reporting.Conduct internal GHG assurance audit and provide support in preparation of facilities GHG 3rd party audits.Monitor the solids and chemical disposals to guarantee a safe environmental protection in compliance with governmental regulations.Monitor air quality, waste water and water conservation performance.Establish environmental KPIs targets in alignment with company environmental policies and strategies.Develop, review and deployment of facilities environmental management system in alignment with ISO 14001.Develop and maintain Environmental procedures and guidelines.Analyze and monitor facilities environmental performance on daily basis and conduct environmental audit.Conduct internal environmental performance benchmarking studies among the oil and gas refineries.Develop and deliver training material to promote environmental awareness among refinery personnel.Requirements:You must hold a Bachelor degree in environmental or chemical engineering from a recognized university/college and approved program.Strong management and coordination skills, EPI/QEP certified professional is preferred.You should have a minimum of 23 years’ work experience in the Oil and Gas sector specifically in Refining, Chemical and/or NGL Fractionation Process.

Responsibilities:Monitor facility operating and business plans objectives to ensure we are consistent and in-line with environmental protection policy and all applicable environmental policies, GIs and standards.							Identify deviations and develope solutions to environmental problems to ensure mitigation of facilities environmental risk and improve compliance to company and governmental environmental regulations.							Develop, review and implement Green House Gas management program including GHG data collection, analysis and reporting.							Conduct internal GHG assurance audit and provide support in preparation of facilities GHG 3rd party audits.				Monitor the solids and chemical disposals to guarantee a safe environmental protection in compliance with governmental regulations.				Monitor air quality, waste water and water conservation performance.							Establish environmental KPIs targets in alignment with company environmental policies and strategies.		Develop, review and deployment of facilities environmental management system in alignment with ISO 14001.					Develop and maintain Environmental procedures and guidelines.							Analyze and monitor facilities environmental performance on daily basis and conduct environmental audit.							Conduct internal environmental performance benchmarking studies among the oil and gas refineries.							Develop and deliver training material to promote environmental awareness among refinery personnel.Requirements:	You must hold a Bachelor degree in environmental or chemical engineering from a recognized university/college and approved program.							Strong management and coordination skills, EPI/QEP certified professional is preferred.							You should have a minimum of 23 years’ work experience in the Oil and Gas sector specifically in Refining, Chemical and/or NGL Fractionation Process.

Responsibilities:As the successful candidate you will be required to perform the following:Streamline Process Simulation & Optimization objectives with corporate objectives and develop program best practices, and monitor KPIs to improve Process Simulation and modeling performance. Lead and develop Process Simulation models for refineries and NGL fractionations using dynamic or steady state simulation software applications.Perform process simulations and modeling using specialized software tools to analyze refinery processes and optimize their performance.Develop and maintain thermodynamic models and mathematical equations that accurately represent the behavior of various refinery processes.Verify the accuracy of the simulation models by comparing the results with actual plant data and conducting sensitivity analyses.Identify areas for process improvements and propose modifications or optimizations to increase efficiency, reduce costs, or meet regulatory requirements.Conduct performance improvement feasibility studies to increase yields, and operational efficiency of the company.Analyze chronicle problems and debottleneck complex models to improve process operations and economic benefits.Conduct safety assessments to evaluate the impact of potential process changes or plant modifications.Lead technical sessions such as the design review, model review, and commissioning.Provide subject matter expertise to operating facilities Operations, Maintenance, and Engineering teams by consulting, providing awareness sessions, and participating and leading technical exchanges and conferences.Conduct benchmarks, business case studies, and pilot and evaluate process simulation technologies.Review standards and General Instructions on behalf of the GME departments and act as leading SME.Prepare detailed reports and presentations to communicate simulation results, findings, and recommendations to stakeholders.Collaborate with other engineers and researchers and vendors to contribute to the development of new simulation software tools, methodologies, and techniques.Requirements:You must have a Bachelor degree in Chemical Engineering.You should have a minimum of 10 years of experience with Process Simulation and Modeling technologies.You should be able to demonstrate expertise in process engineering end flowsheet-based processes simulation.You should possess a comprehensive understanding of refinery facilities, feedstock/product movements, margins, giveaways, process yields, and mass and energy balances.Familiarity with international standards and specifications for advanced process control process modeling is also essential.Exceptional analytical and troubleshooting skills in the field of advanced process solutions is a must.Strong leadership skills to effectively manage technical discussions and guide technical teams is also required.

Responsibilities:As the successful candidate you will be required to perform the following:Daily/weekly/monthly environmental performance monitoring and reporting.Ensure facility operating and business plans objectives are consistent and in-line with company environmental protection policies and standards.Identify deviations and develop solutions to mitigate environmental risk and improve environmental compliance.Develop, review and implement GHG management program including GHG data collection, analysis and reporting.Conduct internal GHG assurance audit and provide support in preparation of facilities GHG 3rd party audits.Monitor the solids and chemical disposals to guarantee a safe environmental protection in compliance with governmental regulations.Monitor air quality, waste water and water conservation performance.Establish environmental KPIs targets in alignment with company environmental policies and strategiesDevelop, review and deployment of facilities environmental management system in alignment with ISO 14001.Develop and maintain Environmental procedures and guidelines.Conduct environmental audit/assessment.Conduct environmental performance benchmarking studies among the oil and gas refineries.Organize technical exchange workshops among the oil and gas refineries.Develop and deliver training material to promote environmental awareness among refinery personnel.Requirements:As the successful candidate you must hold a Bachelor degree in environmental or chemical engineering from a recognized university/college and approved program. A master or advanced degree and/or EPI/QEP certified professional is preferred.You must have a minimum of 12 years’ work experience in Oil and Gas sector especially in Refining, Chemical and/or NGL Fractionation Process with at least 7 year-experience in direct environmental management role for refinery or gas plants.You will be able to demonstrate strong management and coordination skill.Robust analytical and organization skill is a requirement.Excellent technical writing and presentation skill is also necessary.Working Environment:Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.At our client, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Responsibilities:We are looking for DCS Engineer to join Shedgum Gas Plant Department You will be responsible for providing technical support to operating facilities, projects, technology deployment, and talent development of new DCS EngineerShGP was brought on stream in 1981. The plant current processing capacity is 2.5 billion standard cubic feet per day (BSCFD) of associated and non-associated gas. The plant products are NGL, Ethane, Sales Gas and Liquid Sulfur.We are seeking for control system and instrumentation to work within ShGP control system and instrumentation group. The engineer will work with engineering disciplines to enhance and resolve process control and instrumentation activities.Additionally, the engineer is expected to participate in the organization initiatives including but not limited to safety program, innovation programs, operation excellence, knowledge sharing, self-development and others programs as required.The engineer should have a full knowledge involved with advanced Gas Processing control and adequate technical skills to provide engineering analysis, design and control of assigned projects. The Engineer shall check the system performance to ensure it is running up to its design and implement any modification or system enhancement.Requirements: As a successful candidate, he should have a BS in related engineering discipline to control system and instrumentation with (10) years of experience. He should have a recent experience with DCS and ESD (Foxboro/ Triconex), Turbine Control System (TCS), Compressor Control System (Allen Bradley) and control system security.He should have excellent experience and knowledge in designing and updating/upgrading control system and strong knowledge of relevant codes and standards

Overview:We are seeking a Mechanical/Rotating Equipment Engineer to join our new Riyas NGL fractionation RNGLF Department. The RNGLF Facilities will include two fractionation trains which include fractionation units, C3 & C4 treatment, C3 & C4 dehydration and propane refrigeration. The common facilities will include feed surge and product storage, chemicals storage and utilities. Your primary role will be to lead the mechanical design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities. You will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, you will have a detailed understanding of product properties, customer applications and requirements. You must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions.Responsibilities:Provide day-to-day technical support to Operations and Maintenance to troubleshoot and fix rotating equipment and mechanical systems.Conduct failure analysis of rotating equipment and provide recommendationsAble to read vibrations spectrums and provide recommendations accordinglyDevelop the engineering designs packages for the new installation and upgrade projects.Review project proposals and detailed design packages for new facilities .Participate on the testing and commissioning of the new facilities and turnaround and inspection (T&I).Update and maintain engineering documentation and drawings.Analyze system performance and find solution for early failures and low performance of equipmentConduct performance of major rotating equipmentLead major rotating equipment overhauls or repair.Ensure quality, cost effective and timely solutions to any upgrade.Ensure full HSE compliance.Report and analyze key performance indices.Make recommendations for technical/economic optimization of existing facilities.Lead feasibility/profitability studies for new facilities.Assist in the training, development and mentoring of younger staff.Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to  capital investment decisions.Requirements:Bachelor's degree in mechanical engineering from an accredited university. A master’s degree is preferred.A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.You will have at least 10 years of experience in the industrial operation facility; a shale gas facility ispreferred. You should also have a good knowledge of the modular skids mounted unit.You must have a working knowledge of industry codes and standards, such as ASME and API, such as API-STD-610 and API-STD-617.You will have experience with creating/modifying PFDs, and P&IDs.You will have experience with troubleshooting and major repair of oil and gas rotating equipment, such as air compressors, pumps and diesel generators.You will have experience in creating schematics and piping diagrams.You must be able to conduct failure analysis and provide recommendations for failed rotating equipment.You will have experience with rotating equipment and piping field installation, commissioning and testing.You will have experience in specifying piping and equipment layout.You should be capable of communicating with multidiscipline engineers to complete projects. You must have proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organizationStrong written and oral communication skills are a requirement. 

Responsibilities:As the successful candidate you will be required to perform the following:Fabricate and connect different size of instrument tubings and fittings.Utilize different types of hand-held field communicator (TREX, Rosemount Configurator and Honeywell MC Toolkit Configurator) and other instrument test equipment.Perform maintenance for the instrumentation attached to pumps, turbines and compressorsRequirements:You must have a minimum of eight years’ experience as a field instrument tech in refining & NGL plants and or petrochemical industries.You must have a full understanding and adherence of all work permit type requirements.You must have a full understanding of all industrial field instrument principle of operation, types and applications.You must also have a full understanding of related Instrument Loop Diagram (ILD), Piping and Instrument Diagram (P&ID), Instrument Specification Sheet (ISS) cause and effect, and other related drawing for Instrumentation.You should have the ability to measure and convert field instrument signal.You should have Strong analytical and troubleshooting skills in the field of Instrumentation.You should be fully skilled to perform preventive maintenance and troubleshooting with the below list of field instruments; configuration and maintenance of different model of Smart Transmitter (HART, Fieldbus and Honeywell Digital Transmitter)diagnose and calibrate GWR Level transmitter (Magnetrol, Rosemount, Endress Houser and VEGA) Different model of Displacer type Level Transmitter smart and analog.diagnose and calibrate, repair and replace control valve and positioner (Masoneilan, Fisher, valtek, METSO, FLOWSERVE, LCP100)Test and repair Solenoid valve, Pneumatic relay, Boosters and regulators.Instal, adjust and maintain of  probes and approximators.Maintain and replace deferent model of furnace heater flame scanner.

Skills

Industry

Location

Jobtitle

11 ngl fractionation Jobs found

Civil & Structural Engineer

AOC - Planning & Performance Management Specialist

Process Safety Engineer

ASC- Environmental Engineer

Environmental Engineer

Process Simulation & Optimization Engineer ( GM )

Environmental Engineer ( GM )

Control System DCS (HGP)

Mechanical Engineer

Refinery Field Instrument Technician

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

11 ngl fractionation Jobs found

Civil & Structural Engineer

AOC - Planning & Performance Management Specialist

Process Safety Engineer

ASC- Environmental Engineer

Environmental Engineer

Process Simulation & Optimization Engineer ( GM )

Environmental Engineer ( GM )

Control System DCS (HGP)

Mechanical Engineer

Refinery Field Instrument Technician

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.