Research Development Product Development Engineer II

Account Manager II

Product Development Engineer

Marketing Manager DTC

Manufacturing Engineer - Injection Molding

Sr MFG & Process DVL Engineer - Automation Mechanical

Operations Manager

Sales Process & GTM Manager

Plant Quality Improvement Manager

Supply Chain Manager

Responsibilities: <ul><li>Generate and maintain project documentation including schematics, drawings, test data, and reports</li><li>Design and develop electronic circuits while incorporating mechanical design</li><li>Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment</li><li>Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations.</li><li>Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities. Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers.</li><li>10% travel domestic/international (Passport will be required).</li></ul>&nbsp;Requirements: <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree 3-5 years of experience Experience circuit design, testing, and troubleshooting.</li><li>Experience in mechanical design Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors).</li><li>Knowledge of EMI/EMC is a plus.</li><li>Good communication verbal and written.</li><li>Experience in the use of Creo Wildfire software or similar CAD software Windchill PDM Link is a plus Knowledge of SAP is a plus Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred Knowledge of circuit analysis software such as TINA or SPICE Knowledge of ANSYS or similar analysis tools is a bonus Experience in Altium software or similar software is a bonus.</li><li>Proficient in MS Office Suite of Products Ability to read schematic diagrams Generate and maintain project documentation including schematics, drawings, test data, and reports Design and develop electronic circuits while incorporating mechanical design Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations. Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities.</li><li>Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers 10% travel domestic/international (Passport will be required) #TANAKR #LI-ONSITE.</li></ul>

Responsibilities: Sales Activities: <ul><li>Propose and implement annual sales plan (TERP target, billing target, market share, product portfolio expansion, new project etc.) on the dedicated key accounts; conduct analysis to identify customer needs and content per car increase</li><li>Promote products to customers based on their enquiries and requirements to earn sales orders; convince customers to accept contract trade terms, pricing and obtain change approval from Key Account Manager and Sales manager in order to achieve billing targets and increase market share.</li><li>Create and maintain relationship with existing customers; coordinate communications between customer and internal departments in order to maintain customer satisfaction and develop new sales.</li><li>Take care of the offer and negotiation with customer.</li><li>Reach the defined project target (quality, capacity, timing, cost).</li><li>Solve problems and work on profit improvement, handle technical changes.</li></ul> Marketing Activities: <ul><li>Maintain general market awareness; gather customers and competitor information; learn and study market trends; and prepare reports in order to increase market share and develop expansion plan.</li><li>Coordinate with Marcom to organize marketing events and send catalogues and promotion materials to customers in order to promote TE Auto products and corporate branding.</li><li>Customer Relationship Development and Maintenance. Create and maintain relationship with existing and new customers; coordinate communications between customer and internal departments in order to maintain customer satisfaction and develop new sales.</li></ul> Requirements: <ul><li>Bachelor in Engineering.</li><li>3+ years sales experience in auto industry, position in account manager or CQE or FAE or PM or Product engineer.</li><li>Good command of English.</li><li>Communication and influencing skills, integrity, sense of responsibility, proactive, learning capabilities.</li><li>Ability to handle multiple tasks and work under pressure.</li></ul>

Responsibilities: <ul><li>Technical communication to customer, confirm customer application and technical requirement.</li><li>Translate customer’s requirement into engineering specification and provide new product design solution in time.</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, GD&amp;T, product specifications, application specifications, DFMEA, DVPR, SC/CC list etc.</li><li>Lead the design review for compliance with engineering principles, high voltage standards, customer contract requirements, verification and related specifications.</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility.</li><li>Leads DV/PV test, responsible for resolving product design and test problems.</li><li>Responsible for FAI review, work with project team to release product in time.</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the pre-production stages of new products.</li></ul> Requirements: <ul><li>Bachelor level degree majored in Engineering, or above;</li><li>More than 5 years mechanical design experience in Automotive industry. Independently new product development experience is plus.</li><li>Knowledge of connector fundamentals, capable of connector component design,&nbsp;</li><li>Familiar with GD&amp;T, mechanics of plastic/metal materials, and basic knowledge in injection molding, stamping.</li><li>Familiar with automotive product development, automotive products development process like APQP and PPAP.</li><li>Skilled in at least one 3D Software: Creo or Pro/E or Catia or UG. Mastery of office software such as Word, Excel, PPT, etc.</li><li>Proficient in writing and reading English. Good Oral English is plus.</li><li>Good communication skills, High team work spirit and team work experience, ability to work with multicultural engineering teams and cross functional environments.</li><li>Effective problem solving skills, to be innovative, willingness/ability to deal with multiple product and assigned tasks.</li></ul>

Overview: <ul><li>We are seeking a dynamic and strategic Marketing Manager to lead our marketing initiatives within our direct-to-consumer (DTC) sector.&nbsp;</li><li>This role will focus on developing and executing marketing strategies that drive brand awareness, engagement, and sales growth.&nbsp;</li><li>The ideal candidate will be a creative thinker with a strong understanding of consumer behavior and market trends.</li></ul> Responsibilities: Portfolio Strategy: <ul><li>Generate deep insight based on understanding of industries, customers, markets, consumers needs and competitive solutions</li><li>Lead analysis on portfolio prioritization to deliver business objectives</li><li>Plan marketing strategies to achieve the agreed goal, both financial and non-financial goal. Marketing Strategy Development:</li><li>Create and implement comprehensive marketing plans aligned with business objectives and market opportunities.</li><li>Conduct market research to identify trends, customer insights, and competitive landscape. Brand Management:</li><li>Oversee brand positioning, messaging, and visual identity to ensure consistency across all channels.</li><li>Develop and manage campaigns that enhance brand recognition and loyalty.</li><li>Create eye-catching, informative materials such as posters, banners, flyers, shelf-talkers, digital screens, and product brochures. Ensure these materials align with brand guidelines and reflect the product proposition effectively.</li></ul> Product Launches: <ul><li>Lead direct to consumer communications campaign and material development</li><li>Collaborate with product development teams to plan and execute successful product launches.</li><li>Coordinate marketing efforts to support new product introductions and promotional campaigns.</li><li>Create a compelling product offering and design appropriate point-of-sale materials, collaborating with the sales team to enhance product visibility and awareness in the market.&nbsp;</li></ul> Budget Management: <ul><li>Manage the marketing budget, ensuring effective allocation of resources across various initiatives.</li><li>Monitor, tracking and report on campaign performance and budget adherence. Cross-Functional Collaboration:</li><li>Work closely with sales, design, and customer service teams to align marketing strategies with overall business goals.</li><li>Collaborate with external partners, including agencies and vendors, to execute marketing initiatives.</li></ul> Performance Analysis: <ul><li>Track, measure, and analyze the effectiveness of marketing campaigns, making data-driven adjustments as needed.</li><li>Prepare regular reports and presentations for stakeholders on marketing performance and insights.</li></ul> Requirements: Education: <ul><li>Bachelor’s degree in Marketing, Business Administration, or a related field</li></ul> Experience: <ul><li>10+ years of experience in marketing roles, preferably within the MNC DTC (FMCG, Consumer Healthcare) sector.</li><li>Proven track record of developing and executing successful marketing campaigns. Skills:</li><li>Strong understanding of various marketing tools and analytics.</li><li>Excellent written and verbal communication skills.</li><li>Proficient in marketing software and CRM systems. Attributes:</li><li>Creative thinker with strong problem-solving skills.</li><li>Ability to work independently and collaboratively in a fast-paced environment.</li><li>Results-oriented with a focus on driving business growth.</li></ul>

Responsibilities: <ul><li>Provide feedback to Product Engineering where design issues exist that limit quality, reliability, or keep cost targets from being met.</li><li>Work to develop, improve, and implement safety controls in manufacturing</li><li>Support business unit initiatives for cost out, materials, and process productivity</li><li>Ability to proactively drive projects with minimal guidance or supervision</li><li>Responsible for all aspects of tooling and process development: concept, quoting, purchasing, design reviews, build, conditioning, validation, approval, and production release</li><li>Design and complete capability studies/process and tooling validations to ensure capable processes.&nbsp;</li><li>Familiarity with measurement system analysis tools is preferred.&nbsp;</li><li>Work with the New Product Design team on new programs, ensuring design for manufacturability and design for automation opportunities</li><li>Ensure product, tooling, and process documentation meet all our client Quality and Engineering system requirements</li><li>Evaluate and recommend changes to existing mold tooling and tooling design to ensure that manufacturing capabilities meet the maximum capacity and cost objectives for the business unit</li><li>Initiate and review design and mold constructions and significant modifications.</li><li>Implement a controlled process to collaborate with Product Engineering on pending design changes.</li><li>Work with the Global Molding Center Of Excellence and ensure deployment across the Business Unit.</li><li>Participate in management meetings to identify standard process approaches and to identify key technology needs to reduce costs or capture new markets.&nbsp;</li><li>Responsibilities are subject to change based on Manufacturing needs.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Engineering.</li><li>3-5 years of Engineering/Technical experience in a manufacturing environment.</li><li>Must have knowledge of molding process theory, engineering grade resins, and auxiliary equipment.</li><li>Capable of taking molding projects from concept through approval.</li><li>RJG Methodology a Plus.</li><li>Understanding of core processes (i.e., molding, stamping, plating, assembly)</li><li>Proven and practical problem-solving skills and attention to detail.</li><li>Self-directed and highly motivated</li><li>Excellent written, verbal, and presentation skills; Confidence and ability to effectively communicate</li><li>Must be willing and able to travel both domestically and globally as required (Travel &lt;10%)</li><li>Must be willing to participate in teleconference meetings to accommodate other time zones</li><li>Able to evaluate product function and be able to make material recommendations to product engineering</li><li>Working knowledge of LEAN and Six Sigma principles is a plus.</li><li>Strong computer skills (CREO, CAD, project management, word processing, spreadsheets)&nbsp;</li><li>Must be proficient in the English language</li></ul> What your background should look like: <ul><li>Must be willing to participate in teleconference meetings to accommodate other time zones</li><li>Able to evaluate product function and be able to make material recommendations to product engineering</li><li>Working knowledge of LEAN and Six Sigma principles is a plus.</li><li>Strong computer skills (CREO, CAD, project management, word processing, spreadsheets)&nbsp;</li><li>Must be proficient in the English language</li></ul> Competencies: <ul><li>Values: Integrity, Accountability, Inclusion, Innovation, Teamwork</li></ul>

Responsibilities: Equipment design and debugging reception <ul><li>Work with vendors to set up/debug automation machine; Timely feedback and solve the problem to ensure the progress of the project</li></ul> Technical support <ul><li>Provide technical support to manufacturing during pilot run and production start-up/change over</li></ul> Problem solving <ul><li>Problem identification and trouble-shooting a wide range of complex mechanical problems for automation line</li><li>Responsible for the effective communication across the company</li></ul> Training guidance <ul><li>Instruct technicians and participate in automatic line maintenance and product changeover work</li><li>Line maintenance/change over together with/guiding the technicians to make sure automation machine run smoothly</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree, major in mechanical engineering/automation/mechatronics, the academic requirements can be relaxed for outstanding candidates</li><li>Minimum 5 years of experience w/ automated assembly machines, skilled in fixture/jig design and trouble-shooting for automation machine;</li><li>Familiar with Vision Inspection (Keyence/Cognex), Programmable Logic Controllers (PLC), Pneumatics, sensors, motors and other motion control devices and components selection;</li><li>Robot knowledge will be a plus;</li><li>Interfacing knowledge between mechanical and electrical;</li><li>Familiar with Pro-E or SolidWorks, AutoCAD software to create 2D and 3D drawing;</li><li>Proven strong analytical and problem solving skills, good interpersonal skills.</li><li>English skills, able to ready technical materials in English.</li></ul>

Responsibilities: Policies and Procedures <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy.</li></ul> People Management and Development <ul><li>Allocate and balance work across direct reports; authorize subordinate to perform tasks in order to enhance their capabilities;</li><li>Review and provide timely performance feedback to direct reports;</li><li>Mentor subordinates in daily work, provide technical and non-technical training;</li><li>Develop succession plan and employee development plan and monitor the execution;</li><li>Prepare manpower plan and application, conduct candidate interview and give opinion;</li><li>Conduct regular staff meeting on management skills improvement;</li><li>Resolve people/functional issues in the team in order to achieve targeted department performance and retain key talent.</li></ul> Production Capacity Plan <ul><li>Develop production capacity plan base on business forecast in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Manufacturing Management <ul><li>Manage Assembly , Molding, Stamping Operations along with EHS, Facility, Tooling maintenance and execute production plan ; Closely collaborate with quality, project engineering, Materials, ME, and solve operational issues, and update the key issues with ASEAN Operations Manager in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Key Engineering Capability Development <ul><li>Involve and support (including allocate resource and provide advice) key Engineering capability development in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Production Quality System and EHS <ul><li>Maintain production quality system in order to improve manufacturing efficiency and achieve operation excellence.</li><li>Monitor the implementation of company EHS policy in production process in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Requirements: <ul><li>Bachelor degree in Engineering.</li><li>12- 15 years manufacturing experience including 8 years general operational management experience.</li></ul>

Responsibilities: Distributor Management <ul><li>Spearhead the implementation of DPEX best practices across SSEA markets, ensuring alignment with regional and global standards.</li><li>Develop and institutionalize standardized processes for distributor management, encompassing:</li><li>Comprehensive guidelines for distributor scouting and selection, driven by in-depth capability assessments.</li><li>Strategic negotiation, seamless onboarding, and robust performance management processes, including termination protocols when necessary.</li><li>Development and execution of Joint Business Plans (JBP) to drive mutual growth and accountability alongside country managers.</li><li>Designing performance review frameworks, motivation and engagement strategies, and standardized routines to optimize collaboration between Country Managers (CMs) and</li><li>distributors, as well as T2T (top-to-top) engagements between Managing Directors and distributors.</li></ul> Ownership of Distribution Performance: <ul><li>Lead the regional drive to enhance distribution performance, working in close partnership with the Head of Commercial Strategy &amp; CMs to ensure delivery against commercial</li><li>objectives and long-term market growth plans.</li><li>Monitor and analyze market dynamics to ensure consistent execution of the distribution strategy.</li></ul> Driving Key GTM Initiatives: <ul><li>Define and prioritize transformative Go-to-Market (GTM) projects to address critical market opportunities and challenges.</li><li>Oversee the development of inner-country segmentation strategies to unlock growth potential in key markets, ensuring tailored approaches that resonate with local market</li><li>conditions while maintaining regional consistency.</li><li>Leading the implementation of distributor management best practices across SSEA markets, including the development of standardized processes for distributor selection, onboarding, and performance management.</li><li>Driving distribution performance, ensuring alignment with commercial goals, and prioritizing key Go-to-Market initiatives to unlock growth opportunities while maintaining regional consistency.</li></ul> Requirements: Education Background: <ul><li>Bachelors (MBA Preferred)</li></ul>&nbsp;Working Experience: <ul><li>3-5 Years of Corporate Sales and Project Management</li></ul>

Responsibilities: <ul><li>Leader in ASEAN Problem Solving (PS) Committee. Organize regular meetings to review status &amp; planning.</li><li>Promote PS culture throughout the Plant and ASEAN at all levels.</li><li>Promote the selection of the projects that will have the highest impact on plant metrics (eg. CoPQ) and manage all PS projects including PS initiatives from Line QRM escalation to VSM/Plant Level.</li><li>Support production improvement process through PS projects.</li><li>Lead cross-functional team to apply diligently a structured problem-solving methodology that best fits the situation (Shainin, SPS, Six Sigma, or other equivalent methods as described by the Shifting Gears)</li><li>Follow up on all PS projects with the project owner and provide coaching to ensure PS methodologies are correctly applied.</li><li>Regular project coaching with PS Master from Global, and follow-up to project closure and realize savings.</li><li>Proactively anticipate roadblocks to find solutions and escalate when needed.</li><li>Report out project progress, people development, and savings to the PS Committee and Management.</li><li>Tabulate and manage Plant/ASEAN people PS skill matrix and identify training needs, plan &amp; execution.</li><li>Coach, Develop, and Expand Local Problem Solver Practitioners.</li><li>Represent ASEAN in PS matters and report status to regional and global levels.</li><li>Alignment with AP and Global PS leaders for new PS initiatives and execution.</li><li>Any other assignments as delegated by the reporting Manager</li></ul> Requirements: <ul><li>Engineering degree (Mechanical or Electrical Engineering)&nbsp;</li><li>Strong understanding of 6 Sigma tools and Minitab usage</li><li>Strong understanding of engineering fundamentals and product design</li><li>Experience in taking project using structured problem-solving methodology (Shainin Red-X, 6 Sigma, etc)</li><li>Experience in coaching and training.</li><li>Good English speaking and writing skills.</li><li>Strong attention to details, with skills.</li><li>Leadership skills and strong business acumen</li><li>Good interpersonal skill to work with people at different levels</li><li>Be a positive change agent</li><li>Innovative and creative mindset, and open to change with inclusion value.</li><li>Uphold high standards of ethics, integrity, and accountability value analytical</li></ul>

Responsibilities: <ul><li>Analyze forecast signals from the Demand Planning team to generate an optimized build plan while ensuring effective communication across extended supply chain.</li><li>Lead the MPS function to optimize the production plan with the aim to support customer demand, optimize production utilization and balancing inventory in a targeted manner.</li><li>Lead the Material Planning team ensuring implementation of production plan of work centers, machines, or processes to meet customer requests.</li><li>Monitor MRP system setup, identify capacity constraints and proactively expand drive capacity to avoid supply and demand gaps.</li><li>Ensure appropriate parameter settings, system settings and system usage.</li><li>Lead the Materials Analyst team ensuring the right amount of material is procured within the appropriate timing.</li><li>Develop standards for materials management including appropriate levels of safety stock, in-process inventory, and finished goods.</li><li>Handles the disposition of obsolete inventories according to the company’s policy.&nbsp;</li><li>Oversee and supervise physical inventories.</li><li>Active participation in monthly Supply Review Meeting, identifying risks and opportunities and ensuring necessary proactive measures are taken to close gaps to meet budgets.</li><li>Develop new and existing relationships with suppliers.</li><li>Coordinate information flow between planning, warehouse, and production teams.</li><li>Lead, manage, motivate, and develop Supply chain team.</li><li>Proactively approach other functions within Demand Planning, Customer Service and Supply Chain for end-to end optimization.</li><li>Accountable for the timely and accurately execution at the shipping and receiving areas.</li><li>Track and control supply chain KPIs including corrective measure to management on regularly base.</li><li>Improve the overall supply chain performance and look for any possible innovations to the process.</li></ul> Requirements: What your background should look like: <ul><li>Bachelor’s degree and 8+ years’ Supply Chain / Materials Planning experience, including 3+ years in a leadership role.</li><li>People with no degree, but equivalent level of qualification in relevant disciplines, will also be considered.</li><li>Experience in working with ERP systems and other IT systems at customer interface, e.g. SAP,&nbsp;&nbsp;EDI.</li><li>Experience with high mix, low volume manufacturing.</li><li>Good communication skills, able to build customer relations and win customers for own ideas.</li><li>Strong analytical, problem-solving, and decision-making skills.</li><li>Process Improvement.</li></ul> Competencies: <ul><li>Motivating Others.</li><li>Building Effective Teams.</li><li>Managing and Measuring Work.</li><li>Values: Integrity, Accountability, Inclusion, Innovation, Teamwork.</li><li>SET: Strategy, Execution, Talent (for managers).</li></ul>

Skills

Industry

Location

Jobtitle

39 materials selection Jobs found

Research Development Product Development Engineer II

Account Manager II

Product Development Engineer

Marketing Manager DTC

Manufacturing Engineer - Injection Molding

Sr MFG & Process DVL Engineer - Automation Mechanical

Operations Manager

Sales Process & GTM Manager

Plant Quality Improvement Manager

Supply Chain Manager

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

39 materials selection Jobs found

Research Development Product Development Engineer II

Account Manager II

Product Development Engineer

Marketing Manager DTC

Manufacturing Engineer - Injection Molding

Sr MFG & Process DVL Engineer - Automation Mechanical

Operations Manager

Sales Process & GTM Manager

Plant Quality Improvement Manager

Supply Chain Manager

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.