Sr Power Services Tech - AOC

ASC Electrical Engineer

Electrical Engineer

Role Description:Northern Area Power Operation Department under Power Systems Organization is looking for a candidate who can perform as a fully skilled and experienced Power Services Technician able to perform specialized installation or diagnosis and repair on all types of electrical systems.Provides highly skilled expertise and work direction in commissioning, fault diagnosis, testing, repairing, preventive maintenance and routine maintenance on transformers, large circuit breakers and ancillary equipment for substations, switching stations, power plants and large motor controls and underground power cable including fault locating. Frequently provides work direction to lower-classified Power Services Unit personnel.Responsibilities:As the successful candidate you will be required to perform the following:Perform preventive maintenance, installation, commissioning, testing, repairing, analyze results and troubleshooting the following types of equipment: 480V through 230KV switchgear, oil/air/gas/vacuum circuit breakers, substation power transformers, pad-mounted transformers, pole-mounted transformers, load break switches, high and low voltage disconnect switches, oil switches, circuit switchers, transformer tap changers (auto and manual), reclosers, cooling fans, substation lighting, substation civil maintenance, emergency lighting, bus ducts and insulators, electric and hydraulic maintenance on heavy equipment.            Perform repairs, installs/maintains all types of transmission and distribution high voltage cables such as, solid dielectric (rubber and synthetics) cables, paper insulated lead covered (PILCA) cables, low pressure oil filled (LPOF) cables, and submarine cables and testing of high-pressure oil filled (HPOF) cables. Conduct field repairs on electrical and mechanical components of oil circuit breakers, which include air compressors, hydraulic pumps, mechanical springs, and air systems. Also adjust mechanism on breaker linkage as required.                        Perform commissioning tests on new equipment, recommending final acceptance list exception items, if any.                               Supervise excavation to expose cable faults and loaded/unloaded cable.Perform potential testing, Hi-POT testing on Power Cables.Revise existing equipment and systems to conform to verbal instructions, revised drawings, and work orders; then makes operational test runs for satisfactory repair and acceptance.Acquire clearances, performs switching, receives work permits, and restores equipment to service.Requirements:Minimum Years of Experience: 12Special Field of Experience: Twelve (12) years in power system construction, commissioning, maintenance and operation with emphasis on transmission and distribution.Certified for: BLS/FA, Fire Protection, Work Permit Receiver, cable splicing, test for potential and valid Saudi Arabia Heavy Equipment Driving license (2Xlicense.)Fluent command of the English language, oral and written.Has thorough knowledge of equipment and underground cable safety requirements and U.S. & Saudi Electrical Codes.Ability to read work orders, work permits, vendors’ manuals, and schematic diagrams and to communicate with fellow workers on technical aspects of the job.Good knowledge of Safety Management System and relevant PDI'S.

Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate in failure investigations to capture the outcome and share with other facilities to avoid recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:Bachelor’s degree of Electrical Engineering.Minimum 15 years of experience (20+ preferable) in refining/petrochemical industriesExperience performing electrical power system studies utilizing ETAP modeling (preferred)Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation (preferred).Fluent in English, oral and written.

About :Saudi Aramco Global Manufacturing is seeking an experienced Electrical Engineer to work under Assets Technical Solutions Department (ATSD) to handle electrical engineering aspects.The successful candidate should have a minimum of 15 years work experience preferably in oil and gas refining/petrochemical industries(20+ years is preferred) The candidate should be familiar with the topics of electrical safety and arc flash hazards mitigations, hazardous area classification, power generation, distribution and protection, motors and motors controls, AC/DC Systems, electrical studies and industry standards (NEC, IEC, NFPA, IEEE, NEMA, API, etc.).The electrical engineer main responsibility is to develop plans and processes to ensure facilities’ electrical equipment and systems throughout its lifecycle to reduce safety, environmental and economic risk, while maintaining compliance with all applicable codes and standards. The engineer will be responsible for providing technical support on major and critical electrical issues. The applicant should be a strong team player who will interface and work with multiciliary teams. Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate in failure investigations to capture the outcome and share with other facilities to avoid recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:Bachelor’s degree of Electrical Engineering.Minimum 15 years of experience (20+ preferable) in refining/petrochemical industriesExperience performing electrical power system studies utilizing ETAP modeling (preferred)Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation (preferred).Fluent in English, oral and written.

Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate failure investigations to capture the outcome share with other facilities to eliminate recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:You must hold a Bachelor’s degree of Electrical Engineering.You should have a minimum of 15 years of experience in refining/petrochemical industries.Experience performing electrical power system studies utilizing ETAP modeling is preferred.Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems is essential.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation is preferred.You should also be familiar with topics of electrical safety and arc flash hazards mitigations, hazardous area classification, power generation, distribution and protection, motors and motors controls, AC/DC Systems, electrical studies and industry standards (NEC, IEC, NFPA, IEEE, NEMA, API, etc.)

Responsibilities:Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.Review Project Proposals and Detailed Designs packages for new facilities.Develop and maintain the UR engineering standards and design best practices.Participate on the testing & commissioning of the new facilities and Turnaround and Inspection (T&I).Update and maintain engineering documentation and drawings.Analyze system performance and find solution for Energy saving.Ensure quality, cost effective and timely solutions to any upgrade.Report and analyze key performance indices.Make recommendations for technical/economic optimization of existing facilities.Assists in the training, development and mentoring of younger staff.Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.Requirements:Bachelor's Degree in Electrical Engineering from an accredited university. A higher degree is preferred. A Professional Engineer (P.E.) registration is desirable but is not essential.Minimum of 15 years working experience in Electrical engineering, with at knowledge and experience in the field of Oil and Gas Industry.You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, Lighting. Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination and setting using software like ETAP is essential.You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.Be able to conduct failure analysis and provide recommendations for failed electrical equipment. Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.You should be able to communicate with multidiscipline engineers to complete projects.Have proven ability to communicate effectively with strong written and oral communication skills.You must be willing to work in remote areas depending on the project or task assignments.

Skills

Industry

Location

Jobtitle

5 mv switchgear Jobs found

Sr Power Services Tech - AOC

ASC Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

5 mv switchgear Jobs found

Sr Power Services Tech - AOC

ASC Electrical Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.