125112 Vision System Engineer

124480 Quality System Engineer

122429 Advanced Quality Supervisor

125112 Assembly Vision System Engineer

Quality Engineer IV

Signal Integrity Test Engineer

QA Team Leader

123314 Senior Quality & Reliability Engineer - 1

121993  Advance Quality Engineer

Responsibilities: Quality Documents Preparation and Revise. DQIP, Workmanship, Control Plan: <ul><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li></ul> Setup &amp;F AAR: <ul><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li></ul> MSA (GRR),gage: <ul><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li></ul> PFMEA: <ul><li>Assure the process risk control basing on efficient PFMEA.</li></ul> NCR &amp; QA instruction : <ul><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D CHS</li><li>8D report prepare and CHS system handling</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results</li></ul> Training: <ul><li>Providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education,Technical Qualification &amp; Experience: <ul><li>Bachelor degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>MSA, SPC, FACA</li><li>Familiar with quality management tools, such as MSA, SPC, FACA etc</li></ul> Personal Attributes &amp; Competencies: <ul><li>Integrity; Accountability; Communication; Outgoing.</li><li>Good capability of logical thinking, self-study and independent problem solving</li></ul>

Responsibilities: <ul><li>Drive quality policy to improve quality awareness, such as QMS training etc.</li><li>Improve quality system implementation&nbsp;</li><li>Prepare for yearly IATF16949 external audit and customer audits&nbsp;</li><li>Organize internal quality system audit. Review and summarize internal audit results to QS supervisor.</li><li>LPA development, internal process audit;&nbsp;</li><li>Follow up and verify the actions for all NC findings</li><li>Well Document Control in the company&nbsp;</li><li>Support management review</li><li>Continual Improvement Action</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or above in Mechanical, Electronics or relevant&nbsp;</li></ul> Qualification &amp; Certification: <ul><li>IATF 16949 internal auditor;</li><li>APQP, PPAP, FMEA, SPC, MSA certification;</li><li>VDA6.3 internal auditor/authorized auditor</li><li>Experience: More than 5 years of working experience in quality system management, Automotive experience must be.&nbsp;</li></ul> Technical Skill &amp; Competencies: <ul><li>APQP, PPAP, FMEA, SPC, MSA,8D.&nbsp;</li><li>Process audit and product audit skills;</li><li>Familiar with ISO9001, IATF16949;</li><li>Familiar with automotive process and risk management method;</li><li>Proficient in written and oral English;</li><li>Good communication skill, integrity, accountability, logical, self-motivated, ability to work under pressure;</li><li>Good audit and problem-solving skill.</li><li>Understanding the basic HSPM related requirements</li></ul>

Responsibilities: <ul><li>Take charge of new product quality planning and control within company target;</li><li>Participate product&amp; process design review to make sure customer requirements and company quality spec has been implemented.&nbsp;</li><li>Participate new project sample building. Run&amp; Rate, and lead customer audit.</li><li>Define product quality standard: Quality inspection plan. Appearance defect mode Control Plan etc.</li><li>Responsible for PPAP submit and Lead New Product Safe- launch activity implement and analysis quality issues till to exit it. Problem solve skills with process improvement, method such as: PFMEA、SPC、MSA、8D.</li><li>Leading the problem finding, analysis, corrective and preventive actions as well as making 8D report;</li></ul> Requirements: <ul><li>Education: Bachelor degree majored in electronic or mechanical related engineering.</li><li>Qualification &amp; Certification: APQP, PPAP, FMEA, SPC, MSA certification;</li><li>Experience: 8 years experience in quality engineering, Auto experience is prefer</li></ul> Technical Skill &amp; Competencies: <ul><li>Familiar with APQP, PPAP, FMEA, SPC, MSA,8D.&nbsp;</li><li>Process audit and product audit skills;</li><li>Familiar with ISO9001, IATF16949;</li><li>Familiar with special characteristic symbol requirements&nbsp;</li><li>Good English skills of written and spoken;</li><li>Aggressive and self-motivated</li></ul>

Responsibilities: Quality Documents Preparation and Revise: <ul><li>DQIP Workmanship Control Plan.</li><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li><li>Setup &amp; FAAR。</li><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li><li>MSA (GRR) gage</li><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li><li>PFMEA，</li><li>Assure the process risk control basing on efficient PFMEA.</li><li>NCR &amp; QA instruction&nbsp;</li><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non-confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D TECHS - 8D report prepare and TECHS system handling.</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results</li></ul> Training: <ul><li>providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Bachelor degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>MSA、SPC、FACA</li><li>Familiar with quality management tools, such as MSA, SPC, FACA etc</li></ul>

Responsibilities: <ul><li>Function as the voice of the customer regarding quality issues and to represent Laird to the customer.</li><li>Develop working relationships with assigned customers and team members.</li><li>Develop, revise, and maintain Quality documentation as necessary.</li><li>Facilitate and participate in the Continuous Improvement efforts utilizing Quality Tools.</li><li>Facilitate and participate in the Corrective Action process (8D), the MRB (Material Review Board) process, the First Article process, Part Certification process, and the Business System Auditing process.</li><li>Oversee and direct the activities of Quality Inspectors as assigned to achieve quality objectives.</li><li>Monitor partners and suppliers regarding effective and on time failure analysis; review their 8D-reports.</li><li>Advise in Advanced Quality Planning for New Products as required by Project Management</li><li>Advise Departments with Quality System and Product Quality related issues and coordinate the Quality effort.</li><li>Supervise failure analysis of components returned by the customer as required.</li><li>Create quality related reports for internal and external distribution.</li><li>Perform supplier audits, internal audits and participate in customer audits.</li><li>Establish and maintain quality data like PPM, D/P-FMEA, 8Ds, PPAPs, SPC, MSA and others as appropriate.</li><li>Work with manufacturing partners and suppliers regarding their specific requirements.</li><li>Coordinate the PPAP process (including developing, reviewing and approving FMEAs, Control Plans, MSA, SPC, etc. as appropriate) working with all parties involved (e.g., engineering, suppliers/manufacturing partners, operations…) to ensure customer and Laird.</li><li>Provide training on quality related topics to others in the organization.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li></ul> Requirements: <ul><li>Excellent communication skills</li><li>Effectively present information and respond to questions from groups</li><li>Ability to work with management to establish and execute project milestones.</li><li>Ability to work toward defined objectives, targets, and goals with minimal supervision.</li><li>Demonstrated strength of new product development processes and work flow.</li><li>Works well in a team environment and guides the team as the “expert” in a particular field.</li><li>Demonstrated experience in participating on multi-disciplinary product development teams</li><li>Good knowledge of a particular technical area within the job responsibility.</li><li>Able to work successfully in a deadline-driven, fast paced environment and effectively multi-task multiple priorities in a team-oriented environment.</li><li>Must be flexible and able to adapt to changing requirements and schedules</li><li>Knowledge and experience with TS16949 and ISO9001: 2000.</li><li>Ability to read interprets and analyzes blueprints.</li><li>Advanced Flowcharting ability and procedure analysis.</li><li>Advanced knowledge of statistical process control.</li><li>Ability to use precision measuring instruments.</li><li>Bachelors Degree in Engineering or related field, Masters Degree preferred.</li><li>8 or more years of experience</li></ul>

Responsibilities: <ul><li>Review and confirm the test specification of new projects. Evaluate the test requirement of new projects.</li><li>Design and set up test systems for new projects.</li><li>Work with US team for test issues.</li><li>Control all testing equipment and fixtures for electrical lab.</li><li>Monitor all electrical testing process.</li><li>Prepare testing plan. Review test results.</li><li>Ensure test data integrity and proper reporting.</li><li>Solve problems on test.</li><li>Define test methods for new projects, deliver the new test methods to technicians and operators.</li><li>Get training from outside and deliver it inside.</li><li>Improve test process.</li><li>Support on lab management improvement. Develop the test capacity of the electrical test lab.</li></ul> Requirements: <ul><li>Bachelor’s degree, preferably major in electronic information technology or computer.</li><li>Adept in hardware test methodologies, especially for electrical and SI test.&nbsp;</li><li>Good experience in C#, Python or VB, can create software to do test/analysis easier.</li><li>Adept in test equipment: TDR (Time Domain Reflectometer), NA (Network Analyzer), Oscillograph, Data Timing Generator, LCR Meter, Hi-pot, Milliohm Meter, Microohm Meter, Megohm Meter, Thermal Chamber.</li><li>Adept in signal integrity test. Familiarity with the elements and testing methods of Insertion Loss, Impedance, Return Loss, Time Delay Skew, SCD21.......</li><li>Familiarity with the product verification testing. Good experience in setting up new test system, drafting test plans and documents.</li><li>Good measurement capability and analysis capability.&nbsp;</li><li>Familiarity with standards and products, such as QSFP, SFP+, PCI-E, DisplayPort, HDMI, SATA, Minis-SAS, USB…</li><li>Adept in MSA.</li><li>Fluent English both in verbal and written.</li><li>Strong PC skills. Adept in hardware and software. Adept in MS Office.</li></ul>

Responsibilities : <ul><li>Analysis of product and production systems to meet customer expectations.</li><li>Management of an engineering team of 8 people.</li><li>Training and motivating employees along the lines of quality efforts.</li><li>Perform quality control from materials to finished products.</li><li>Conducting quality audits and documenting their results.</li><li>Setting quality goals and coordinating measures to achieve them.</li><li>Preparation of reports and their analysis of internal processes.</li><li>Handling of complaints and blocking/issuance of products</li></ul> Requirements : <ul><li>Relevant college or university degree in a technical field.</li><li>Relevant experience in the automotive industry (5+ years): experience in customer and/or supplier quality matters.</li><li>Knowledge of quality assurance systems Knowledge of Core Tools (FMEA, Control Plan, MSA, PPAP, 8D, SPC).</li><li>Knowledge of IATF 16949.</li><li>VDA 6.3 process auditor qualification.</li><li>Strong computer skills, MS-Office tools (Power Point, Excel, Word and Outlook).</li><li>Fluent English and Hungarian language skills, spoken and written.</li></ul>

Responsibilities:&nbsp; <ul><li>Ensure mass production and quality during sample production to mass production, quality planning for early-stage projects.&nbsp;</li><li>Collaborate with project engineers, product engineers, and process engineers for new project development.&nbsp;</li><li>Focus on internal quality and reliability analysis and control, early-stage quality planning, and sampling frequency.</li><li>Provides technical support in evaluating products from a quality and reliability standpoint.</li><li>Leads cross-functional problem-solving teams to investigate quality issues, minimize customer impact, PPM, and cost of poor quality, and drive timely resolution.</li><li>Responsible for coordinating and ensuring completion of customer quality requested activities across design and manufacturing. This includes coordinating globally for all sites, factories, and associated team</li><li>Manage quality issues or inquiries for parts in assigned Global Product Lines. The parts may be made at a facility or a sub-tier supplier.</li></ul> Requirements:&nbsp; <ul><li>Age 35 and under, no gender preference.&nbsp;</li><li>5-8 years of work experience, looking for young and highly adaptable candidates.&nbsp;</li><li>Bachelors degree or higher.&nbsp;</li><li>Preference for candidates with management experience in the automotive electronics industry, and those who have participated in the entire process from start to finish.</li><li>Familiarity with APQP, PPAP processes, and quality management tools (like 8D, 5I, MSA).</li><li>Familiar with APQP/PPAP processes for early-stage project quality development.</li><li>Utilization of 8D/5I analysis methods for quality issues.</li><li>Proficient in the five major quality tools.</li><li>Familiar with manufacturing processes of connector assembly module products.</li><li>Familiar with TS16949 system.</li><li>Experience in the automotive electronics industry is preferred.</li><li>New project VOC quantity, PPAP audit metrics, front-end quality design, early-stage quality planning, stability and yield improvement.</li></ul>

Responsibilities: <ul><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.&nbsp;</li><li>Implement quality planning and controls for prototype and/or sample builds and manage build te</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during developing stage.&nbsp;</li><li>Involve and drive for design verification before design freeze and product qualification testing before Gate5 of project.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).&nbsp;</li><li>Implement quality controls and documentation needed for production shop floor.</li><li>Monitor process capability and oversee ongoing corrective actions as required.</li><li>Review and approve the measurement and cosmetic inspection.</li><li>Support the customer and quality system audit as required</li></ul> Requirements: <ul><li>At least Bachelor degree in Electrical or Mechanical Engineering or related field</li><li>Quality control experience in cable assembly / connector / Socket or relevant industry.</li><li>Good written and oral English communication.</li><li>Understand ISO9001 quality system.</li><li>Be good at SPC, FMEA, MSA, and 7-QC tools.</li><li>Experienced in Statistical Process control techniques.&nbsp;</li><li>Understand Model Based Dimensioing (MBD) and requirements</li><li>Understand GD&amp;T definition and requirements.</li><li>Be good at APQP procedure and requirements.</li><li>Be familiar with EIA-364 test procedures.</li><li>Ability to foster teamwork and internal and external relationships.</li><li>Excellent organizational habits and priority management</li><li>Customer focused with a commitment to quality.</li><li>Internal / External Auditor</li><li>Six Sigma (preferred Black Belt)</li><li>Design of Experiments</li><li>Uplevel Communication</li><li>Strategic Planning</li><li>Skilled in using software (Mini Tab / JMP)</li><li>Quality Leader</li></ul>

Skills

Industry

Location

Jobtitle

9 msa Jobs found

125112 Vision System Engineer

124480 Quality System Engineer

122429 Advanced Quality Supervisor

125112 Assembly Vision System Engineer

Quality Engineer IV

Signal Integrity Test Engineer

QA Team Leader

123314 Senior Quality & Reliability Engineer - 1

121993 Advance Quality Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

9 msa Jobs found

125112 Vision System Engineer

124480 Quality System Engineer

122429 Advanced Quality Supervisor

125112 Assembly Vision System Engineer

Quality Engineer IV

Signal Integrity Test Engineer

QA Team Leader

123314 Senior Quality & Reliability Engineer - 1

121993 Advance Quality Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.