Process Engineering -SAGO

Process Engineering

ASC- Process Engineer - CCR Platformer

Process Engineer - Distillation

Process Engineer

Process Operator

Process Engineer - Crude Distillation

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (10) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:You will be required to perform the following:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilities.Develop, review and/or validate plant mass balances.Check plant performance to ensure it is running up to its design.Look for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation.Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing procedures.Conduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance test.Evaluate the catalyst recovery performance.Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses.Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation.Lead process and equipment optimization studies.Lead feasibility studies.Lead PHA and HAZOP studiesInitiate and coordinate ESA's.Develop implementation plan for critical recommendations.Ensure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studies.Lead Energy Optimization / Conservation studies.Initiate process safety relief audit studies.Lead Water conservation studies.perform management of change (MOC).verify system operations and performance after implementing the recommendations.Requirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:As the successful candidate you will be required to perform the following:Provide engineering technical support to the Refinery Operations.Perform unit monitoring and performance evaluations.Conduct troubleshooting/assisting operations divisions in resolving Operations related problems.Monitor Advance Process Control and alleviate the constraints to maximize APC utilization.Conduct catalyst performance analysis, yield estimates and life cycle estimation.Lead HAZOP, MOC, Root Cause analysis and incidents investigations.Prepare annual and long range operating plans and objectives.Identify the units constraints and perform debottleneck studies.Conduct engineering studies to improve refinery gross margins.Conduct energy audits and surveys to improve refinery energy performance and energy KPI’s.Provide capital project design reviews and commissioning support.Involve in development of procedures and reviews.Requirements:You must hold a Bachelors degree in Chemical Engineering from a recognized and approved program. You should have a minimum of 10 years of experience in CCR/Platforming and Naphtha Hydrotreating.Experience in the Crude Unit, Diesel Hydrotreating, Penex ISOM, Merox Units, Amine Treating and Sulfur Recovery Units will be an advantage.You must have a thorough knowledge of engineering practices, international standards, and economic principles.

Responsibilities:We are seeking a Downstream Process Engineer with experience in Crude Distillation and treating processes (Atmospheric distillation, Vacuum distillation, MEROX, etc …) to join our Ras Tanura Refinery Engineering Department under the Downstream Global Manufacturing to support and oversee the performances of facility assets.Your primary role will be to provide exceptional process engineering support, monitoring plant performance, capture optimization opportunities and value-creation programs for the operation of crude Distillation and Treating Units in order to operate safely, reliably, and economically as well as achieve target goals while realizing company strategic imperatives.As the successful candidate you will be required to perform the following: Perform in-depth plant monitoring and optimize performance of CDU/VDU units by overseen unit’s operation and economics losses. Ensure issuing detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables. Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvementsPerform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.You will be assigned the Lead Role in process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability. Prepare design request, budget justifications and detailed implementation plans for economically justifiable projects. Also, develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.Train younger or less- experienced engineers by providing necessary guidance, assessing strengths and skills in need of improvement. Serve as technical mentor/ advisor to enhance the technical knowledge of the engineers through practical field discussions, demonstrations and/or simulations using available engineering aids.Requirements:You must hold a Bachelor’s degree in Chemical Engineering from a recognized and approved program.An advanced degree is preferred.You should have a minimum 15 years of total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.Exposure to different licensor technologies for Hydrocarbon treating is a plus as well as familiarity with Honeywell UOP or Axens licensed units.You must be Certified PHA/HAZOP leader.Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units are preferred.

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:Operational Excellence and Process Safety Participate in the PHA and MOC process by providing technical inputs and evaluating recommendations to ensure operational feasibility and compliance to safety standards.Investigate incidents, provide and evaluate recommendations from PHA to ensure timely implementation of the process. Process Optimization and Plant Performance EvaluationsImplement Advance Process Control System through proper awareness and specialization to optimize the process.Monitor the plant parameters daily and evaluate the plant performance by providing recommendations in order to improve technical processes.Manage material and energy balance, compare with design and assist the plant management in facilitating processes to run the plant efficiently and economically.Provide engineering assistance on technical aspects to the Operations Group, conduct evaluation and selection of equipment based on technical requirements to meet engineering standards.Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of technical department’s systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.Provide critical input to support the development of Engineering systems, policies, processes, and procedures in order to meet business requirements.Ensure team members comply with all Engineering policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.Qatarization:Contribute to the development of Qatari employees.This accountability is applicable to expatriate. employees only. Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/servicesRequirements:Required (Qualification1 / Discipline): Bachelor’s degree in chemical engineering.Preferred (Qualification1 / Discipline): Master Degree in Chemical Engineering. ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in Petrochemicals Industry in Process Engineering.Preferred (Years2 / Job Level3 / Industry): Experience in Oil & Gas Industry.

Responsibilities:Ensure production targets are met while maintaining compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, Daily Operating Instructions, Standard Operating Procedures (SOPs) and Job Safety Analyses (JSAs).Monitors process conditions and makes necessary adjustments in order to optimize the process while ensuring products are within the required specifications.Document critical activities and abnormalities via operator’s log.Perform comprehensive shift turnover.Timely completion of all compliance training.Ensure correct mitigations are in place for emergency & safety bypass permits.Issue Work Permits and authorize the unit entry.Responsible for housekeeping in work area. Advise support groups on housekeeping needs.Conduct detailed, quality rounds and complete e-SOMS tours in the plant, log all abnormalities and required follow up in the Narrative log. Report abnormalities to Shift Supervisor and take the necessary corrective actions.Participate in Safety and Reliability Improvement teams as required.Certify in the areas as decided by plant leadership and mentor for new employees.Take corrective actions to keep all the process parameters within its design limits.Work with and assist Technical and Maintenance to understand and solve the process problems.Prepare and commission equipment per DOI’s and Maintenance Schedule.Perform unit start-ups, normal operation, process upsets and shutdowns as per SOP and EOP requirements.If certified as Board Operator, work on DCS Board and communicate with upstream/downstream units on any process upset/problems.Follow and review SOP’s and EOP’s, give feedback Supervisor / Training Coach if SOP needs revisions or modifications.Work with Turnaround Planning to develop production plans and work packages. Support other operating units in TA as applicable.Unload CCA and collect process / product samples as required.Quality, Health, Security, Safety and Environment:Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, Daily Operating Instructions, Standard Operating Procedures (SOPs), Job Safety Analyses (JSAs), MOC Process, and Quality Management System.Participate in the safety activities of the shift to ensure regulatory, health, safety, security, environmental, and quality compliance.Carry out plant walk-downs and audits to ensure work is being performed safely and that the plant safety systems are enabled. Coordinate efforts to correct discrepancies.Actively participates in shift toolbox meetings, JSAs, MSCM’s, etc.Execute Stop Work Authority and take immediate corrective actions to stop unsafe behaviors.Policies, Systems, Processes and Procedures:Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency.Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner.Reporting:Prepare timely and accurate recaps and reports in order to meet departmental requirements, policies and standards.Communicate to Shift Supervisor to inform on issues that require additional follow up.Report incidents and near misses and participate in investigations as required.Qatarization:Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.Requirements:Education:Required: High School Diploma with Tertiary Vocational DiplomaPreferred: 3-year Diploma or Bachelor’s degreeExperience:Required: 3-5 years of similar experience in the O&G IndustryPreferred: 3-5 years of similar experience in Petrochemicals Production Facility

Responsibilities:As the successful candidate you will be required to perform the following:Perform in-depth plant monitoring and optimize performance of CDU/VDU units whilst overseeing the unit’s operation and economics losses.Issue detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvementsPerform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.Lead process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.As well as develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.Requirements:You must hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.You should have a minimum of 15 years total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.Exposure to different licensor technologies for Hydrocarbon treating is a plus.Certified PHA/HAZOP leader.Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units.

Skills

Industry

Location

Jobtitle

8 moc Jobs found

Process Engineering -SAGO

Process Engineering

ASC- Process Engineer - CCR Platformer

Process Engineer - Distillation

Process Engineering

Process Engineer

Process Operator

Process Engineer - Crude Distillation

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

8 moc Jobs found

Process Engineering -SAGO

Process Engineering

ASC- Process Engineer - CCR Platformer

Process Engineer - Distillation

Process Engineering

Process Engineer

Process Operator

Process Engineer - Crude Distillation

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.