Research Development Product Development Engineer II

Senior Manufacturing & Process Development Engineer

Manufacturing Engineer - Injection Molding

Sr. Engineer - SAP Full Stack (Hybrid)

Lead UI Engineer

MGR II Finance - Plant Operations

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

120368 Senior Manufacturing Engineer

125452 Continuous Improvement Analyst

Responsibilities: <ul><li>Generate and maintain project documentation including schematics, drawings, test data, and reports</li><li>Design and develop electronic circuits while incorporating mechanical design</li><li>Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment</li><li>Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations.</li><li>Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities. Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers.</li><li>10% travel domestic/international (Passport will be required).</li></ul>&nbsp;Requirements: <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree 3-5 years of experience Experience circuit design, testing, and troubleshooting.</li><li>Experience in mechanical design Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors).</li><li>Knowledge of EMI/EMC is a plus.</li><li>Good communication verbal and written.</li><li>Experience in the use of Creo Wildfire software or similar CAD software Windchill PDM Link is a plus Knowledge of SAP is a plus Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred Knowledge of circuit analysis software such as TINA or SPICE Knowledge of ANSYS or similar analysis tools is a bonus Experience in Altium software or similar software is a bonus.</li><li>Proficient in MS Office Suite of Products Ability to read schematic diagrams Generate and maintain project documentation including schematics, drawings, test data, and reports Design and develop electronic circuits while incorporating mechanical design Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations. Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities.</li><li>Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers 10% travel domestic/international (Passport will be required) #TANAKR #LI-ONSITE.</li></ul>

Responsibilities: <ul><li>Develop and implement manufacturing processes for wire harness assembly.</li><li>Analyze current processes and identify areas for improvement.</li><li>Collaborate with design engineers to ensure manufacturability of new products.</li><li>Conduct root cause analysis and implement corrective actions for process failures.</li><li>Lead continuous improvement initiatives using lean manufacturing principles.</li><li>Mentor and train junior engineers and production staff.</li><li>Prepare and maintain documentation for processes, procedures, and standards.</li></ul> Requirements: <ul><li>Bachelor’s degree in Engineering (Mechanical, Electrical, or Industrial preferred).</li><li>5+ years of experience in manufacturing and process development, specifically in wire harness or related fields.</li><li>Strong understanding of manufacturing processes, quality control, and lean methodologies.</li><li>Proficient in CAD software and other engineering tools.</li><li>Excellent problem-solving and analytical skills.</li><li>Strong communication and teamwork abilities.</li></ul>

Responsibilities: <ul><li>Provide feedback to Product Engineering where design issues exist that limit quality, reliability, or keep cost targets from being met.</li><li>Work to develop, improve, and implement safety controls in manufacturing</li><li>Support business unit initiatives for cost out, materials, and process productivity</li><li>Ability to proactively drive projects with minimal guidance or supervision</li><li>Responsible for all aspects of tooling and process development: concept, quoting, purchasing, design reviews, build, conditioning, validation, approval, and production release</li><li>Design and complete capability studies/process and tooling validations to ensure capable processes.&nbsp;</li><li>Familiarity with measurement system analysis tools is preferred.&nbsp;</li><li>Work with the New Product Design team on new programs, ensuring design for manufacturability and design for automation opportunities</li><li>Ensure product, tooling, and process documentation meet all our client Quality and Engineering system requirements</li><li>Evaluate and recommend changes to existing mold tooling and tooling design to ensure that manufacturing capabilities meet the maximum capacity and cost objectives for the business unit</li><li>Initiate and review design and mold constructions and significant modifications.</li><li>Implement a controlled process to collaborate with Product Engineering on pending design changes.</li><li>Work with the Global Molding Center Of Excellence and ensure deployment across the Business Unit.</li><li>Participate in management meetings to identify standard process approaches and to identify key technology needs to reduce costs or capture new markets.&nbsp;</li><li>Responsibilities are subject to change based on Manufacturing needs.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Engineering.</li><li>3-5 years of Engineering/Technical experience in a manufacturing environment.</li><li>Must have knowledge of molding process theory, engineering grade resins, and auxiliary equipment.</li><li>Capable of taking molding projects from concept through approval.</li><li>RJG Methodology a Plus.</li><li>Understanding of core processes (i.e., molding, stamping, plating, assembly)</li><li>Proven and practical problem-solving skills and attention to detail.</li><li>Self-directed and highly motivated</li><li>Excellent written, verbal, and presentation skills; Confidence and ability to effectively communicate</li><li>Must be willing and able to travel both domestically and globally as required (Travel &lt;10%)</li><li>Must be willing to participate in teleconference meetings to accommodate other time zones</li><li>Able to evaluate product function and be able to make material recommendations to product engineering</li><li>Working knowledge of LEAN and Six Sigma principles is a plus.</li><li>Strong computer skills (CREO, CAD, project management, word processing, spreadsheets)&nbsp;</li><li>Must be proficient in the English language</li></ul> What your background should look like: <ul><li>Must be willing to participate in teleconference meetings to accommodate other time zones</li><li>Able to evaluate product function and be able to make material recommendations to product engineering</li><li>Working knowledge of LEAN and Six Sigma principles is a plus.</li><li>Strong computer skills (CREO, CAD, project management, word processing, spreadsheets)&nbsp;</li><li>Must be proficient in the English language</li></ul> Competencies: <ul><li>Values: Integrity, Accountability, Inclusion, Innovation, Teamwork</li></ul>

Responsibilities: <ul><li>In depth knowledge of SAP ABAP/4 programming using BAPIs, BADIs, RFCs, IDOCs, Workflow, LSMW, Reports, SAPScript, writing user exits, BDC coding, and interfaces.</li><li>Designing and implementing workflows to automate business processes.</li><li>Support RICEF objects, Fiori apps, and B2B integrations (SOAP, IDOC, OData).</li><li>The SAP ABAP Developer should possess strong application development and system integration skills.</li><li>Experience in Fiori Design patterns, expertise in UI Theme designer.</li><li>Design, develop, and enhance SAP business applications using ABAP on the backend and SAP Fiori/UI5 for the frontend.</li><li>Build and extend existing Fiori applications using SAPUI5, HTML5, CSS, and JavaScript.</li><li>Troubleshoot and resolve complex issues in SAP modules (e.g., FICO, SD, MM) by analyzing root causes and implementing effective solutions.</li><li>Experience with Fiori/UI5 is highly desirable.</li><li>Enhance the user experience (UX) by designing intuitive and responsive Fiori/UI5 applications, incorporating Fiori Elements and smart controls.</li><li>Leverage BTP services to develop and deploy cloud-based applications and extensions.</li><li>Support ongoing development, implementation, and quality checks for existing projects/applications.</li><li>Participate in peer code reviews and learn and adapt to the companys engineering and development practices.</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in a related field or equivalent experience.</li><li>Confirmed experience automating pipelines for continuous integration, testing, delivery and security.</li><li>Confirmed experience architecting applications, databases, services or integrations.</li><li>Minimum of four years of related work experience.</li></ul> Preferred Qualifications <ul><li>Minimum 4 years of experience as an SAP developer or a similar role with a focus on SAP S/4, ECC, BW, SOLMAN, FIORI, GRC</li><li>Strong, well-rounded knowledge of SAP full life cycle implementations and SAP concepts / capabilities</li><li>Proficient in ABAP, EDI management, and SAP modules.</li><li>Proficiency in SAPUI5, HTML5, CSS3, and JavaScript</li><li>Experience working in Implementation, Upgrade, Maintenance and support projects</li><li>Experience of Designing, coding, and modifying SAP applications to meet specific requirements.</li><li>Strong background in SAP Gateway and OData services</li><li>SAP Certification is a plus.</li><li>Knowledge of SAP Cloud Platform and BTP is a plus.</li></ul>

Role Description: <ul><li>We are seeking a UI Lead to help create our next-generation products that satisfy our customer’s needs.</li><li>The UI Lead will use their deep professional knowledge and an understanding of the customer environment to propose and develop new and innovative solutions to customer problems.</li><li>They will use their understanding of applied engineering, product lifecycle and technology advancement to help align and solve problems across multiple product lines using similar technology.</li><li>The successful candidate will be hands on and curious with a focus on technology, remote collaboration, the application of engineering principles, and the ability to influence cross functionally to achieve department goals.</li><li>This role will report to the Technical Program Manager and will work from our Pune office</li></ul> Responsibilities: <ul><li>Define the infrastructure and the software architecture for the React-based Front End related to a specific set of products and projects.</li><li>Act as a lead and a mentor to offshore teams, including code review, best practices, architecting, product thinking, and code quality.</li><li>Develop platform software and collaborate across engineering groups to maximize the use of common emerging platform technologies, conventions, technological building blocks.</li><li>Collaborate with Product Management, Architects and Product Owners from various teams and Executive leaders to define the business and technical strategy.</li><li>Collaborate with global engineering leads at various businesses to establish and drive adoption of conventions and innovation.</li></ul> Requirements: <ul><li>Education: Bachelors or higher degree in a related technical field (Electrical, Electronics Engineering/Computer Engineering)</li><li>8+ Years in front end development</li><li>5+ years in architecture, design, implementation, and/or support of a micro front end that consumes high distributed service-oriented architectures, having an architectural sense for ensuring availability, reliability, scalability and security.</li><li>Experience with UI and UX concepts using modular and reusable UI components.</li><li>Experience with refactoring large code bases using safe techniques.</li><li>Experience building CI/CD pipelines. DevOps and Devsecops, version control, and system testing with Gitlab and Jenkins</li><li>Experience creating and obtaining actionable insights from Datadog, Elasticsearch, Prometheus, and Grafana</li><li>Experienced with programming and scripting languages such as JavaScript, CSS, React.js, GO</li><li>Willingness to learn and teach complex technologies.</li></ul>

Overview:&nbsp; <ul><li>The Aerospace, Defense &amp; Marine (AD&amp;M) Business Unit is currently seeking a plant controller to support its Mansfield OH, and Hauppauge, NY locations. The Plant Controller must be an exceptional Business Partner to the plant manager and his/her teams.&nbsp;</li><li>This position is responsible for pulling together all plant financials, analyzing and bridging between details at the entity level, and up-leveling results for review by global management.&nbsp;</li><li>The role reports directly to the Sr. Mgr. Controller, with a strong dotted line to the Plant Manager.</li></ul> Responsibilities:&nbsp; <ul><li>This position may involve working with technical data, technology, software/source code, hardware, or other items (collectively “items) subject to U.S. and non-U.S.&nbsp;</li><li>export control laws and regulations. </li><li>Under these regulations, it may be necessary to verify a candidate’s national origin and/or citizenship status to determine whether a U.S. or other government export license is required before releasing its technologies to the candidate.&nbsp;</li><li>If determined that client will require a license or will be prohibited by applicable laws from providing the candidate with items necessary for the performance of this position, then client will expressly reserves the right to either&nbsp;</li><li>a) make an offer of employment contingent upon receiving required export licenses from the appropriate government agency,&nbsp;</li><li>b) consider the candidate for a different position that is not subject to such restrictions, on whatever terms and conditions shall establish in its sole discretion or c) decline to move forward with the candidate’s application.</li></ul> Requirements: Experience: <ul><li>Bachelors Degree in Finance, Accounting&nbsp;</li><li>Fluent in English, and Spanish would be a plus.</li><li>5 - 10 years of Finance experience in a manufacturing environment - Required</li><li>Accomplished knowledge in standard costing, variance analysis, cost accounting, cost analysis, and reporting matters.&nbsp;</li><li>Strong background in Financial Analysis and Forecasting Modelling.&nbsp;</li><li>Prior finance experience in general accounting principles and processes.</li><li>Understanding of financial drivers and their impact within a manufacturing environment&nbsp;</li><li>Familiar with Lean Manufacturing and Operational Excellence concepts.</li><li>Proficient in understanding of manufacturing, procurement, and other Supply Chain matters&nbsp;</li><li>Familiarity with SAP, Excel, and BI tools.&nbsp;</li></ul>

Responsibilities: <ul><li>The R&amp;D/Product Development Engineering is responsible for the design, development of product line extensions of legacy product, with a focus on sustaining engineering of contactors/relays, power distribution panels and related products for applications in aerospace electrical power distribution and management systems.&nbsp;</li><li>The ideal candidate should be able to work independently and within a team-based environment. Determine product requirements based on internal/external product design specifications and Voice of the Customer inputs. Plan and record results of design, development, and sustaining activities, including validation testing.&nbsp;</li><li>Design to cost target while meeting financial and performance expectations.&nbsp;</li><li>Manage Bill of Materials for products. Facilitate cost reduction activities on new and existing products. Perform calculations, analysis, and testing to ensure that a product meets specifications. Participate in and/or lead Design and Process failure mode and effects analysis.&nbsp;</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers, and external customers.&nbsp;</li><li>Initiate and manage engineering change activities. Apply electrical, electronic, and mechanical principles to components, including assembly, analysis, and documentation of results.&nbsp;</li><li>Supports, participates, and leads design, test, modification, fabrication, and assembly of prototype devices.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree</li><li>3-5 years of experience</li><li>Experience circuit design, testing, and troubleshooting</li><li>Experience in mechanical design</li><li>Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors)</li><li>Knowledge of EMI/EMC is a plus</li><li>Good communication verbal and written</li><li>Experience in the use of Creo Wildfire software or similar CAD software</li><li>Windchill PDMLink is a plus</li><li>Knowledge of SAP is a plus</li><li>Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred</li><li>Knowledge of circuit analysis software such as TINA or SPICE</li><li>Knowledge of ANSYS or similar analysis tools is a bonus</li><li>Experience in Altium software or similar software is a bonus</li><li>Proficient in MS Office Suite of Products</li><li>Ability to read schematic diagrams</li></ul>

Responsibilities: Rules &amp; Procedures: <ul><li>Serve on-site production delivery and quality performance, be responsible for solving difficult problems and continuous improvement of mold maintenance technology, </li><li>TPM management performance of mold maintenance &amp; spare parts management, etc., and effectively implement TEs core values.</li></ul> Solve difficult problems in mold maintenance technology &amp; continuous improvement: <ul><li>Analysis and solution of various mold technical problems in the mold production process &amp; continuous improvement, involving quality, output, abnormal downtime, work efficiency, etc., with engineering and technical ideas to analyze the causes of problems, solution design drawings and result verification, and effectively expand horizontally.</li><li>Summarize the experience of solving technical problems of mold maintenance, and continue to improve the standardization of mold maintenance</li></ul> Mold Repair TPM Management Performance &amp; Spare Parts Management Improvement: <ul><li>Mold maintenance preventive work summary and machine change planning, effectively improve mold maintenance abnormal shutdown, maintenance work efficiency and maintenance and repair time cycle.</li><li>Effectively improve the accuracy of mold parts management and abnormal fast response, and continuously improve the maintenance cost and inventory of mold parts.</li></ul> Requirements: Education:&nbsp; <ul><li>Major, Mechanical design/Mold design, etc., college degree or above Plus read and write English</li></ul> Work experience: <ul><li>Process Engineer More than two years of on-site maintenance experience in stamping dies, CI Engineer&nbsp;</li><li>precision stamping/ordinary stamping</li><li>More than two years of stamping die engineering technology improvement (design IE engineer&nbsp;</li><li>production technician Work experience, working experience in the electronic stamping industry of foreign companies Stamping Process Technician&nbsp;</li><li>UP Technician (Bond6) Priority is given to testing.</li><li>ME Backup</li></ul> Ability requirements: <ul><li>Proficient in the use of CAD and other engineering drawing software, mold parts design improvement drawings, specific technical problems analysis and engineering technology improvement ability;</li><li>Proficient in the use of office software, able to conduct data analysis and summary, experience summary of difficult problems and continuous improvement and follow-up ability.</li><li>Familiar with lean/problem solving tool applications such as lean KAIZEN, TPM, STD work, etc., and familiar with the application of management performance indicators such as OEE, QCO, spare parts management, etc.</li><li>Familiar with five major tools such as quality management, PFMEA, APQP and so on is preferred.</li><li>Good communication skills, teamwork, problem-solving and planning skills.</li></ul>

Responsibilities: Capacity planning for short-term &amp; long-term according to production requirements: <ul><li>Machine, Tool, Labor, Layout capacity management</li><li>Capacity improvement plan</li></ul> Cost analysis and cost improvement management: <ul><li>Cost analysts are involved in detailed cost research and comparative analysis including to competitors.</li><li>Drive cost reduction initiatives</li></ul> Upgrade the productivity and achieve cost control target: <ul><li>Identify, lead &amp; drive efficiency improvement projects to reduce the conversion cost;&nbsp;</li><li>Set and control the manufacturing standard time</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or equivalent education with IE major</li></ul> Qualification &amp; Certification: <ul><li>Familiar with MS office software</li><li>Familiar with Auto-CAD drawing</li></ul> Experience: <ul><li>4+ years on industrial engineering experience, lean/6 six sigma related</li><li>Cost analysis related background is plus;</li><li>Have independent project leader experience</li></ul> Technical Skill &amp; Competencies: <ul><li>Layout for exist and new expansion, Optimize the plant/workshop layout to improve space utilization</li><li>Capacity forecast and adjustment, analysis improvement opportunity and make investment proposal</li><li>Lead labor efficiency &amp; line balance improve/optimization</li><li>Involve key project detail design of machine/material/process</li><li>Deep understand of IE toolset, such as ECRS/Time study/cell design</li></ul>

Responsibilities: <ul><li>Support site to create the annual lean plan, identify key improvement priorities to enhance site performance</li><li>To implement enhanced TEOA system in plant and achieve TEOA Star level plant through improvement activity.</li><li>Conduct workshops and Lead / lean know-how transfer projects, to implement, optimize and solve specific problems in operation</li><li>Deliver TEOA trainings / lean trainings (e.g. TEOA Basics, Bootcamp training)</li><li>Analyze existing processes, systems, and workflows across various departments or business units.</li><li>Use data analysis tools and techniques to identify inefficiencies, bottlenecks, or areas for improvement.</li><li>Perform root cause analysis to determine underlying issues affecting process performance.</li></ul> Requirements: Education: <ul><li>Bachelor degree in Industrial Engineering or related majors</li></ul> Qualification &amp; Certification: <ul><li>Fluent with Microsoft Office, Power BI</li><li>GB or BB is plus</li></ul> Experience: <ul><li>5+ years progressive experience in Lean / IE / Six Sigma deployment background</li><li>Familiar with automotive industry</li><li>IE background is preferred</li><li>Have demonstrated the ability to use Lean principle&nbsp;</li><li>Lead team to use Lean/Six Sigma tools and influence others positively</li><li>Have demonstrated the ability on Lean training</li><li>Willing to burden high pressure&nbsp;</li><li>Management experiences or with high potential</li><li>Good team work and stronger communication skill</li></ul> Technical Skill &amp; Competencies: <ul><li>Familiar with lean methodology, mindset</li><li>Demonstrate the ability to lead change</li><li>Experience as project leader of improvement projects</li><li>Good communication and ability to influence others</li></ul>

Skills

Industry

Location

Jobtitle

23 lean ux Jobs found

Research Development Product Development Engineer II

Senior Manufacturing & Process Development Engineer

Manufacturing Engineer - Injection Molding

Sr. Engineer - SAP Full Stack (Hybrid)

Lead UI Engineer

MGR II Finance - Plant Operations

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

120368 Senior Manufacturing Engineer

125452 Continuous Improvement Analyst

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

23 lean ux Jobs found

Research Development Product Development Engineer II

Senior Manufacturing & Process Development Engineer

Manufacturing Engineer - Injection Molding

Sr. Engineer - SAP Full Stack (Hybrid)

Lead UI Engineer

MGR II Finance - Plant Operations

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

120368 Senior Manufacturing Engineer

125452 Continuous Improvement Analyst

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.