Assembly Operator

Maintenance Technician

Principal Research and Development

Senior R&D/Product Development Engineer

Senior Manufacturing Engineer

Senior Research and Development / Product Development Engineer

Staff R&D/Product DVL Engineer

Product Engineering Manager

Staff Development Engineer(Product Development)

Sr R&D/Product DVL Engineer - Power Connector

Responsibilities: <ul><li>Solid understanding of production machinery and proper assembly procedures.</li><li>Inspecting assembled products for any faults or defects.</li><li>Stopping the assembly line and halting production if machinery fails or a major defect is detected.</li><li>Maintaining a record of mechanical repairs and adjustments.</li><li>Reporting incidents, faulty operations, or product imperfections on the assembly line to management.</li></ul> Requirements: <ul><li>At least 3 years’ Working experience on an assembly line Excellent knowledge of manufacturing safety protocols and regulations.</li><li>Diploma in Technical Education Only (Engineering degree NOT preferred)</li><li>Minimum 3 years of relevant experience in automobile industry is preferred.&nbsp;</li><li>Ability to read and interpret technical drawings, blueprints, and schematics.</li><li>Ability to work under pressure in a fast-paced environment.</li><li>Good physical stamina and the ability to lift heavy pieces of equipment, as well as stand for hours at a time.</li><li>Medium and communication level English – Preferably A2</li><li>Any past medical history with related to accidents is not preferred.&nbsp;</li><li>Euro pass CV format&nbsp;</li><li>Verification of Original documents and original experience certificates during the interview&nbsp;</li><li>Familiar with Automobile Production Tools&nbsp;</li><li>Reliable, loyalty, Committed personality</li><li>Good problem-solving skills</li><li>Quality Work&nbsp;</li><li>Age Preference, 23- 35 Years&nbsp;</li><li>40 Hours duty per week</li></ul>

Responsibilities: <ul><li>Ensuring smooth and error-free operation of the plant.&nbsp;</li><li>Checking the operation of the production machinery used in the plant, detecting malfunctions.</li><li>Carry out planned and preventive maintenance.</li><li>Reconditioning and repairing parts of the plants production machinery.</li><li>Immediate and adhoc rectification of faults and shortcomings requiring intervention.</li><li>Managing maintenance related administration.</li></ul> Requirements: <ul><li>Diploma qualification in Mechatronics, Electrical Engineering or Mechanical Engineering</li><li>At least 3 years of relevant experience preferably in automobile industry&nbsp;</li><li>Multi shifts.</li><li>Knowledge of automation</li><li>Knowledge of pneumatic and hydraulic systems</li><li>Reading of electrical and mechanical engineering drawings</li><li>Accurate and precise work</li><li>Proactive attitude</li><li>Medium and communication level English – Preferably A2.</li><li>Any past medical history with related to accidents is not preferred.</li><li>Euro pass CV format&nbsp;</li><li>Verification of Original documents and original experience certificates during the interview</li></ul>

Responsibilities: <ul><li>Technical communication to customer, confirm customer application and technical requirement;</li><li>Translate customer’s requirement into engineering specification and provide new product design solution in time;</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, GD&amp;T, product specifications, application specifications, DFMEA, DVPR, SC/CC list etc.</li><li>Lead the design review for compliance with engineering principles, high voltage standards, customer contract requirements, verification and related specifications;</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility;</li><li>Leads DV/PV test, responsible for resolving product design and test problems;</li><li>Responsible for FAI review, work with project team to release product in time.</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the pre-production stages of new products.</li></ul> Requirements: <ul><li>Bachelor level degree majored in Engineering, or above;</li><li>More than 10 years mechanical design experience in Automotive industry. Independently new product development experience is plus.</li><li>Knowledge of connector fundamentals, capable of connector component and terminal design,&nbsp;</li><li>Familiar with GD&amp;T, mechanics of plastic/metal materials, and basic knowledge in injection molding, stamping.</li><li>Familiar with automotive product development, automotive products development process like APQP and PPAP.</li><li>Skilled in at least one 3D Software: Creo or Pro/E or Catia or UG. Mastery of office software such as Word, Excel, PPT, etc.</li><li>Proficient in writing and reading English. Good Oral English is plus.</li><li>Good communication skills, High team work spirit and team work experience, ability to work with multicultural engineering teams and cross functional environments.</li><li>Effective problem solving skills, to be innovative, willingness/ability to deal with multiple product and assigned tasks.</li></ul>

Responsibilities: <ul><li>Technical communication to customer, confirm customer application and technical requirement;</li><li>Translate customer’s requirement into engineering specification and provide new product design solution in time;</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, product specifications, application specifications, DFMEA, DVPR, SC/CC list etc.&nbsp;</li><li>Lead the design review for compliance with engineering principles, high voltage standards, customer contract requirements, verification and related specifications.</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility.&nbsp;&nbsp;</li><li>Leads DV/PV test, responsible for resolving product design and test problems.&nbsp;&nbsp;</li><li>Responsible for FAI review, work with project team to release product in time.&nbsp;</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the preproduction stages of new products.&nbsp;</li></ul> Requirements: <ul><li>Education: Bachelor’s degree or above in Mechanical Engineering or equivalent majors.</li><li>Work Experience: 10+ years of relevant mechanical engineering work experience with electrical components, Motor vehicle connector design.</li><li>Technical Skill &amp; Competencies:</li><li>Working knowledge in industry standard (USCAR LV214,LV215，USCAR 2.0 ) and related product application</li><li>Knowledge in relevant mechanical design and development, including but not limited to, resin and metal material selection, fundamentals of statics, DFMEA, product qualification, etc.</li><li>Expert in 3D Design Applications (such as Creo, Spaceclaim, etc.)</li><li>Proficient in geometric dimensioning &amp; tolerancing (GD&amp;T). Proficient at limit and fit analysis including statistical tolerance analysis.</li><li>Proficient in developing and writing design objectives for product specifications</li><li>In depth knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.) with experience driving Design for Manufacturing (DFM)</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Optimistic when facing difficulties and team work spirit;</li></ul>

Responsibilities: <ul><li>Mold drawings control and updating</li><li>Routine troubleshooting of molds and molding processes.</li><li>Develop an improvement plan and control the progress.</li><li>Publication of WI and PFMEA.</li><li>Increase tooling capacity.</li><li>Experience in injection mold design, familiar with the use of pro-E or UG software</li><li>It is mainly responsible for the maintenance and improvement of molds, and does not involve the design of new molds</li><li>Maintenance and improvement of mass production molds, and problem solving of production lines</li></ul> Requirements: <ul><li>Bachelors degree or above, can communicate in spoken English</li><li>More than 5 years of experience in mold design or mold improvement.</li><li>More than 3 years of experience in molding process.</li><li>Rich experience in plastic molds and molding.</li><li>Familiarity with automotive industry norms.</li><li>Proficiency in the use of Pro/E or UG, AUTO CAD、Power point、excel outlook。</li></ul>

Responsibilities: <ul><li>Technical communication with customer, confirm customer applications and technical requirements.</li><li>Translate customer’s requirements into engineering specification and provide new product design solution in time.</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, GD&amp;T, product specifications, application specifications, DFMEA, Tolerance analysis etc.</li><li>Lead the design review for compliance with engineering principles, product standards such UL and IEC, customer contract requirements, verification and related specifications.</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility.</li><li>Leads DV/PV test, responsible for resolving product design and test problems.</li><li>Responsible for FAI review, work with project team to release product in time.</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the pre-production stages of new products.</li></ul> Requirements: <ul><li>Bachelor’s degree majored in Mechanical, or above.</li><li>More than 5 years mechanical design experience, power signal connector related is preferred, independently new product development experience is preferred.</li><li>Knowledge of connector fundamentals, capable of connector component design, preferred that knowledge of power and signal connector application and international standards ex. UL and IEC.</li><li>Familiar with GD&amp;T, tolerance analysis, mechanics of plastic/metal materials, and basic knowledge in injection molding, stamping. Skilled in at least one 3D Software: Creo, Pro/E, Catia, UG or SolidWorks.&nbsp;</li><li>Skilled of office software such as Word, Excel, PPT.</li><li>Proficient in writing and reading English. Good oral English is plus.</li><li>Good communication skills, high teamwork spirit and teamwork experience, ability to work with multicultural engineering teams and cross functional environments.</li><li>Effective problem-solving skills, to be innovative, willingness/ability to deal with multiple products and assigned tasks.</li></ul>

Responsibilities: <ul><li>Lead technical product development of judicious projects from market definition through production and release.</li><li>Act as a core team member for mechanical design and design leader for cross-functional teams in concert with the project manager.</li><li>Train colleagues on technical tools and processes.</li><li>Leverage understanding of competitive products and intellectual property for the department.</li><li>Execute on multiple projects concurrently driving technology and product decisions with the team.</li><li>Exercise influence within the department by participating in design reviews of colleagues’ projects.</li><li>Contribute to technical initiatives within the department.</li><li>Drive customer and supplier communications.</li><li>Execute the product development through stages of concept, design, validation, and industrialization.</li><li>Concept new products using engineering tools to create 3D CAD models and work with a cross-functional team to jointly refine these concepts into manufacturable, cost-effective products.</li><li>Perform engineering analysis including mechanical simulations on key features such as spring beams, latches, and compliant pins.</li><li>Create 2D drawings with geometric dimensions and tolerances and conduct tolerance analysis to ensure design intent can be achieved.</li><li>Write specifications and technical documentation including design objectives, application guidelines, validation test plans, and qualification reports.</li><li>Coordinate and support the creation of engineering prototypes and customer samples, formalizing features as needed.</li><li>Work with manufacturing to reconcile dimensionally measured products to 2D drawings.</li><li>Coordinate validation and qualification testing on products to ensure design objectives are met.</li><li>Conduct failure analysis as needed using tools such as CT scans, cross sections, and tear downs to find the root cause for issues and implement solutions.</li><li>Maintain engineering documentation and history files.</li><li>Keep account to the project team on deliverables including honoring timeline commitments.</li></ul> Requirements: <ul><li>Bachelor’s degree or higher in mechanical engineering.</li><li>5 years or more of mechanical engineering product development experience.</li><li>Engineering experience in connector and cable assembly industry strongly preferred.</li><li>Participation in full product development cycle from establishing customer requirements to releasing qualified design to production.</li><li>Demonstrated proficiency in 3D CAD applications, PTC Creo preferred, Ansys SpaceClaim beneficial.</li><li>Demonstrated proficiency in 3D CAE simulation applications, Ansys preferred.</li><li>Ability in geometric dimensions and tolerances and tolerance analysis.</li><li>Detailed understanding of manufacturing processes including stamping, molding, plating, and assembly.</li><li>Design for manufacturing (DFM) to address customer requirements including mechanical, environmental, electrical, manufacturing, and cost.</li><li>Strong interpersonal communication and cross functional teamwork skills.</li><li>Ability to work in a global environment</li></ul>

Job Overview:&nbsp; <ul><li>The Data and Devices Business Unit is looking for R&amp;D Product Development Engineer (PDE) to design and develop high speed cable assembly and connector which are used inside of switches, servers and storage for data communication.&nbsp;</li><li>In this role you will be responsible for the design and documentation of new products, from market definition through production and release, always prioritizing customer requirements and maintaining a customer service mindset.&nbsp;</li><li>You will conceive original ideas for new products/solutions and develop them into practical and economical models.&nbsp;</li><li>You will determine specifications, perform engineering analysis, make preliminary sketches and designs, and coordinate support operations (such as fabrication engineering samples and testing).&nbsp;</li><li>Interaction with customers, vendors, marketing and sales personnel, and other engineering areas during the pre-production stages of new products is also an important part of this role.&nbsp;</li></ul> Responsibilities:&nbsp; <ul><li>Responsible for product development of high-speed cable assembly, connector from market definition through production and release:&nbsp;</li><li>Work closely with the customer and sales/SA/FAE/PM in getting the right and clear VOC (voice of customer) and convert to a design conceptualization and preliminary product specification.&nbsp;</li><li>Conceive concepts and perform feasibility studies.&nbsp;</li><li>Run mechanical and thermal simulations.&nbsp;</li><li>Make the engineering evaluation/proposal to the customer.&nbsp;</li><li>Create the detailed design including 2D/3D drawings and perform DFMEA/tolerance analysis.&nbsp;</li><li>Build prototype samples and perform validation.&nbsp;</li><li>Provide technical support to the Operations team including Quality and Production for efficiency improvement and safe launch.&nbsp;</li><li>Resolve product related issues to closure and manage the ECN/PCN (Engineering Change Notification/ Product Change Notification).&nbsp;</li><li>Build a deep understanding of the market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams&nbsp;</li><li>Maintain a system level understanding of the customer application and the product design/concept necessary for providing a solution to the customers’ expectation.&nbsp;</li><li>Provide technical support to customer, sales, PM and plant teams. Conduct necessary DFMEA, tests, engineering analysis, trouble shooting and verification.&nbsp;</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives.&nbsp;</li><li>Execute technical documentation to fully detail design drawings and requirements, engineering and product change notices, and design history files.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience&nbsp;</li><li>5 years of relevant mechanical engineering work experience with electrical components, electrical devices, mechanical structure design, manufacturing tooling development (stamping, molding, assembly), or manufacturing process development&nbsp;</li><li>Knowledge in socket design, connector design, or other relevant mechanic design and development.&nbsp;</li><li>Familiarity of switch and or server equipment.&nbsp;</li><li>Knowledge in relevant mechanic design and development, including but not limited to, material selection, tolerance analysis, DFMEA, product qualification, etc.&nbsp;</li><li>Proficiency in 3D Design Applications (such as ProE or Spaceclaim)</li><li>Basic knowledge in raw material, industry standard, and product application&nbsp;</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.)&nbsp;</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D, etc.)&nbsp;</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.&nbsp;</li><li>Open minded, coachable, willing to learn new skills, and motivated to grow.&nbsp;</li><li>This role emphasizes designing products that align closely with customer requirements, maintaining a proactive customer service mindset throughout the development process.&nbsp;</li></ul>

Responsibilities: <ul><li>Connector research and development.</li><li>Technical communication with customers and frontend team to confirm/understand their applications and technical requirements.</li><li>Translate requirements into engineering specification and provide solutions with new product designs on time.</li><li>Responsible for design concept making, mechanical analysis, building 3D models and 2D drawings, GD&amp;T, part list/BOM, DFMEA, product specifications, application specifications, etc.</li><li>Lead the design review for compliance with engineering principles, product standards, customer contract requirements.</li><li>Lead design review with cross functional teams to confirm the manufacturing feasibility and product quality.</li><li>Leads EV/DV/PV tests to validate product designs.</li><li>Responsible for FAI review, co-working with project team and providing on-site support at manufacturing site for product ramp-up on time</li></ul> Requirements: <ul><li>Bachelor’s degree majored in mechanical engineering, electrical and electronic engineering, physics, etc.</li><li>More than 8 years mechanical design experience, connector-related is preferred, independently new product development is a plus</li><li>Knowledge of connector fundamentals, capable of connector component design, preferred that knowledge of high-speed connector applications.</li><li>Familiar with GD&amp;T, tolerance analysis, mechanics of plastic/metal materials and basic knowledge in injection molding, stamping and assembly.</li><li>Skilled in at least one 3D Software: Creo, Pro/E, Catia, UG or SolidWorks. Skilled of office software such as Word, Excel, PPT.</li><li>In-depth knowledge and experience of CAE for mechanical/structural simulations.</li><li>Proficient in writing and reading English. Chinese language skill is a plus.</li><li>Good communication skills, high teamwork spirit and teamwork experience, ability to work with multicultural engineering teams and cross functional environments.</li><li>Effective problem-solving skills, to be innovative, willingness/ability to deal with multiple products and assigned tasks</li></ul>

Responsibilities: <ul><li>Lead the development of power connector solutions, including sockets, high-speed connectors, and cable assemblies, from market definition through production and release, collaborating closely with customers, Product Managers, Sales, and Field Application Engineers to gather actionable Voice of Customer (VOC) insights.</li><li>Conceive innovative concepts for power connector products and perform feasibility studies, conducting mechanical and thermal simulations to evaluate design performance in real-world conditions.</li><li>Develop engineering evaluations and proposals focused on power connector applications, creating detailed designs, including 2D and 3D drawings, and performing Design Failure Mode and Effects Analysis (DFMEA) and tolerance analysis.</li><li>Build prototype samples of power connectors, conduct validation testing to ensure compliance with performance and safety standards, and complete product qualification processes to finalize specifications.</li><li>Provide technical support to Operations, including Quality and Production teams, to enhance efficiency and ensure safe product launches, proactively resolving product-related issues and managing Engineering Change Notifications (ECN) and Product Change Notifications (PCN).</li><li>Develop a deep understanding of market trends and customer needs in power connectivity, fostering connections between business engineering teams and customer engineering teams to deliver optimal solutions.</li><li>Follow the LEAN Product Development (LEANPD) Project Process to ensure timely completion of new product development projects while adhering to quality standards and budget constraints, driving product development through stage-gate reviews.</li><li>Collaborate with global manufacturing resources, procurement, and external suppliers to meet technical, quality, and cost objectives specific to power connectors, providing thorough technical support to customer-facing teams.</li><li>Execute comprehensive technical documentation, including design drawings, engineering change notices, and design history files, ensuring all documentation reflects product specifications and development processes.</li><li>Engage in continuous improvement initiatives to enhance design and manufacturing processes for power connectors, utilizing data-driven insights to optimize product performance and efficiency.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience</li><li>Generally requires 5 years of relevant mechanical engineering experience with electrical components or devices, mechanical structure design, manufacturing tooling development (stamping, molding, assembly), or manufacturing process development</li><li>Knowledge in relevant mechanic design and development, including but not limited to, material selection, tolerance analysis, DFMEA, product qualification, etc.</li><li>Proficient in 3D CAD applications (Creo preferred) with experience in 3D solid&nbsp;modeling including sheet metal, 2-D drawings, PDM link Data Manager&nbsp;and general knowledge in design applications such as Spaceclaim, Solidworks, or others used&nbsp;only in concept stage&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Occasional user of finite element analysis software (Ansys, Workbench)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Proficient in developing and writing design objectives for product specifications</li><li>Basic knowledge in raw material, industry standard, and product application</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.) [Note must have knowledge of 3 of the 5]</li><li>Basic knowledge of quality tools (FMEA, 6 sigma, DOE, etc.)</li><li>Proficient using MS office software (Word, Excel, PPT, Outlook, MS Teams, etc.)&nbsp;</li><li>Proficient in geometric tolerancing&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Fluent in English (both verbal and written)&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Proficient problem solver – able to handle moderate complexity situations and use data analytics and critical thinking to reach logical conclusions with general direction</li><li>Solid organizational and time management skills with an ability to manage and execute multiple tasks/deadlines/projects simultaneously under general direction.</li><li>Ability to prepare and present customer facing solutions to accurately communicate design concepts and engineering proofs.</li></ul>

Skills

Industry

Location

Jobtitle

35 instrumentation drawings Jobs found

Assembly Operator

Maintenance Technician

Principal Research and Development

Senior R&D/Product Development Engineer

Senior Manufacturing Engineer

Senior Research and Development / Product Development Engineer

Staff R&D/Product DVL Engineer

Product Engineering Manager

Staff Development Engineer(Product Development)

Sr R&D/Product DVL Engineer - Power Connector

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

35 instrumentation drawings Jobs found

Assembly Operator

Maintenance Technician

Principal Research and Development

Senior R&D/Product Development Engineer

Senior Manufacturing Engineer

Senior Research and Development / Product Development Engineer

Staff R&D/Product DVL Engineer

Product Engineering Manager

Staff Development Engineer(Product Development)

Sr R&D/Product DVL Engineer - Power Connector

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.