Fire and Gas Technician

ASC-Portfolio Evaluations Geoscientist - UR Assessment & Data Solution

ASC Civil Structural Design Engineer

AOC - Planning & Performance Management Specialist

Mechanical Piping Engineer

Gas Processing AI Engineer

Process Engineer - Distillation

ASC - Safety Advisor (Loss Prevention)

Petroleum Engineer (Economics & Strategy)

Environmental Engineer - Waste Water ( GM )

Responsibilities:Preventive and Corrective Maintenance:Periodic Calibration for Hydrocarbon detectors, H2s, Oxygen, Smoke, Heat, Flame Detectors, Manual Call Points and Manual Push Button Stations.Periodic Inspection and Functional Test for Fire and Gas Alarm, to ensure all Safety System devices functioning as per the Cause and Effect Chart.Telecommunication System:Preventive and Corrective Maintenance of Public Address and Emergency Notification System throughout the Plant.Regular functional test in coordination with Fire department.Management of Fire and Gas, Telecommunication Maintenance Programs:Development and regular review of Standard Maintenance Procedures for Fire and Gas Systems.Involvement and Executive Preventive Maintenance programs like creating Material Master list by providing min/ max numbers, assigning inspection frequency based on manufacturer recommendations.Incoming material inspection, etc.Requirements:Min 3 years of experience withing Oil and Gas/ Chemical/ Petrochemical industry.Bachelors in Control and Instrumentation / Electronic / Electrical Engineering.

Responsibilities:As a subject matter expert, you will perform the following;Geological technical assessments of resource plays to ensure prospectivity.Risk assessments to identify gaps in knowledge and quantify COS.Resource assessments to confirm value and support reserve estimation.Geologically support reservoir engineering with Commerciality Assessments.Strategic planning and monitoring to ensure the best plays are being de-risked and targets are being met.Work closely with the Exploration & Characterization Divisions to support planning and execution of wells.Evaluate current practices and identify opportunities for improvements.Effectively communicate through presentations and written reports to technical peers and management.Provide recommendations and advise in your particular area of expertise.Mentor younger staff and provide opportunities for knowledge sharing.Requirements:A Bachelor’s degree in Geology, Geophysics or related sciences; advanced degree is preferred.15 years of experience, with at least 5-10 years in unconventional plays, including shale or tight gas exploration, development, or strategic planning, across multiple unconventional hydrocarbon basins, is required.A solid background in the play-based approach to evaluate tight sand and shale plays, evaluation of risk and resource assessment within unconventionals, is essential.Experience managing and de-risking a portfolio of tight sand or shale opportunities from exploration through development, with a strong understanding of the geological and engineering factors that determine success within different unconventional plays, is essential.Knowledge in the integration of sedimentology, depositional environments, petrophysics, geomechanics, basic geophysics and basic reservoir engineering, is preferred.Experience integrating basic reservoir engineering and geology to tight and source rock reservoirs, is preferred.Previous experience working with reservoir engineers and reserve auditors to determine reserve and resource estimations, is preferred.Experience working with the production and drilling departments on well performance and optimization, is preferred.Experience working with Reservoir Engineering teams on Economics of Unconventional Field Development plans, is preferred.Candidates with more or less experience can potentially be considered, depending on the quality of their experience.

Responsibilities:You will be required to perform the following:Produce a full-fledged engineering design package that includes all required documents/drawings, for all onshore and offshore oil and gas facilities throughout the Northern Area. The design work requires a thorough knowledge and familiarity with the company and industry standards.Perform structural design including production of construction documents related to onshore/offshore hydrocarbon facilities.Identify design requirements and prepare necessary design calculations using hand calculations and software such as STAADPro V8i or equivalent finite element analysis software.Perform engineering assessments for the repair of deteriorated concrete, prepare technical reports and verify ‘As-Built’ record drawings for accuracy.Prepare layout plans and structural engineering details for development by draftsmen and designers.Prepare detailed scope of work, material take-offs and cost estimates as part of the construction documents.Perform field activities such as site surveys and record existing field conditions, take and verify measurements within project area.Participate in projects walkthroughs and provide reports of findings.Provide mentoring and transfer knowledge, skills and experience to entry-level engineers and designers.Requirements:The candidate shall hold a Bachelor degree in Civil Engineering. A Master’s degree in Structural Engineering is preferred. You must have interpersonal skills including ability to communicate and contribute positively to the project design team.A minimum of ten-year experience in structural engineering design of reinforced concrete, steel, masonry and wood structures using US Design Codes and Standards. Extensive experience using industry codes such as ASCE, ACI, AISC, UBC is required. In addition, the candidate shall have basic architectural knowledge, enough to serve basic building re-designs/renovations/remodeling.You should have expertise in using STAADPro software. In addition, you should have working knowledge of Microstation or other drafting software. It is required to have a strong technical and engineering design skills in a design office environment. A Professional Engineering Registration/License from the US/CA is a plus.The candidate must be physically fit to visit offshore sites, which requires going by chopper or boat. There shall be no physical/medical restrictions.

Role Description:Our partner occupies a unique position in the global energy industry. They are the world's largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance their value to society.Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.We are seeking a Planning & Performance Management Analyst to join Domestic Refining & NGL Fractionation (DR&NGLF) Admin Area Executive Office.DR&NGLF Admin Area manages and operates 4 wholly owned refineries, 4 Joint Venture refineries and 2 NGL Fractionation plants.You will perform analytical reviews of financials, operational analysis, planning and reporting activities such as budgeting, accountability, KPI reporting, cost control, contracts and technical or business analysis projects.Responsibilities:As the successful candidate you will be required to perform the following:Responsible for the preparation and design of management reports analyzing the Admin Area financial and non-financial performance.Develop techniques or mechanisms to dissect the refining business performance and provide advice on improvement actions.Offer analytical support for department on project evaluation and commercial arrangement economic assessment.Provide strategic analysis of business-related activities and coordinating administrative activities.Keep department/division head informed of special and unusual problems encountered, and provide problem-solving solutions.Take initiatives to improve the team’s process and provide work direction to other analysts, clerical and/or administrative staff.Requirements:You must hold a Bachelor’s degree in business, engineering or related discipline.You should have a minimum of 10 years related downstream experience, refining and/or refined product sales and marketing experience preferred.Possession of an advanced business degree (e.g., MBA), relevant professional certification (e.g., CMA, CFA, CPA) is preferred.Demonstrated capability and track record in the practice of planning & performance management and proficiency in the use of Microsoft Office tools are required.Experience in Linear Programming is preferred.

Responsibilities:Design or study mechanical modification to oil and gas processing, oil and gas handling and utilities facilities. Execute capital projects according to the work scope, schedule, and budget.Responsible for project development and completion: Preliminary engineering to detail designs to construction and the final and safe turnover to proponent.Design development of project proposal, include definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Participate in HAZOP Studies, FEED review and Detailed Engineering.Manage contractor preparation of detailed design drawings, material specifications and procurement, and/or construction bid packages.Provide input to develop and prepare contracting plan and strategy for solicitation, evaluation, and award of contract for detail engineering, procurement, and construction.Review the project schedule, and coordinate and monitor the assigned project’s progress, and challenge below par performance of the contractor.Review and resolve day to day contractors’ claims and complaints related to the assigned project (mechanical) work during construction, and ensure HSE complianceEnsure compliance to company standards, procedures, policies, and agreed work specifications. Fully understand contract documents (inclusive of appendices, drawings, and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications, and project schedule, to support the project manager and/or company representative in the timely completion of project.Project Report and implementation of company initiatives during project execution.Uphold engineering ethics and maintain high standards of professional behavior and conduct.Resolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.Lead multiple concurrent projects, each potentially with one or more support engineersDevelop and apply piping material classes based on product and project requirementsSpecify insulation, paint, and protective coatings on Piping & Instrumentation Diagrams (P&ID)Select and specify manual valves and piping specialty itemsCreate and maintain internal specifications, work instructions, and job aidsResolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.Develop and implement strategies to improve project planning, cost, schedule, and/or quality.Evaluate existing tools and methodologies in your area of expertise and make recommendations on your implementation.Conduct special studies in the field of Project Management.Participate in the reviews and evaluation of the capabilities of Engineering & Construction contractors, suppliers, and project management related service providers.Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractors companies to maintenance prior to field installation.Review detailed drawings and material specification from Layout Group for piping modifications as requested.Participate in HAZOP Studies, FEED review.Requirements:As the successful candidate, you will hold a bachelor's degree in Engineering from a recognized and approved program. A higher degree is preferred. Ideally a Professional Registered Engineer. PMP Certification is desirable but not mandatory.You will have seven years of related experience, preferably in the oil industry or similar process industry working in the engineering design and construction phase of projects.As a subject matter expert;You will have experience in the support of both small- and large-scale capital projects.You must be familiar with International Engineering Codes and Standards.You will have excellent English communication skills (verbal and written).You will have a dynamic attitude towards project improvements and savings.Experience in the GCC, Saudi Arabia, or is preferred Familiarity with standards preferred.You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software.Competencies :Plan & Organize.Analyze & Solve problems.Safety. Influence others.Communicating openly & effectively.Incorporate Technical Knowledge. Intercultural Awareness. Advanced Microsoft Excel Knowledge.

Overview:Gas Operations Technical Support Department is looking to hire a Gas Processing AI Engineer with hands-on experience in AI applications for the Hydrocarbon Processing & Control Industry, specifically, in the Gas Processing and Liquefaction business.Responsibilities:Develop and lead execution of research programs that focus on developing novel technologies in the area of natural gas processing.Lead multiple technology development projects related to natural gas processing.Identify collaboration opportunities with leading institutes/organizations in the development of natural gas treatment technologies in upstream surface facilities.Lead planning and execution of capital technology demonstration projects.Provide technical guidance during complex troubleshooting for gas processing plants.Liaise with relevant corporate stakeholders to ensure in-house technology options deployment.Develop technology roadmaps and strategies to ensure prompt technology delivery.Identify licensing opportunities of in-house developed technologies.Conduct full feasibility studies on novel technologies, including chemical, mechanical, and thermal options, to guarantee maintaining natural gas processing at the lowest cost. Conduct outlook studies of emerging technologies in the field of natural gas processing. Requirements:Ph.D. degree in Chemical Engineering or Industrial Chemistry with background on midstream natural gas treatment, recovery and utilization processes.Minimum of 25 years of experience in R&D relevant to midstream natural gas treatment technologies.Relevant list of publications and patents.Proven track record of conducting advanced technical projects with an ability to connect basic science research with industrial applications. Hands-on experience in field operation and engineering projects Knowledge of gas separation process designs and engineering terminologiesVision, drive, and entrepreneurship spirit to develop new technologies and products.Ability to work effectively in multicultural teams.

Responsibilities:We are seeking a Downstream Process Engineer with experience in Crude Distillation and treating processes (Atmospheric distillation, Vacuum distillation, MEROX, etc …) to join our Ras Tanura Refinery Engineering Department under the Downstream Global Manufacturing to support and oversee the performances of facility assets.Your primary role will be to provide exceptional process engineering support, monitoring plant performance, capture optimization opportunities and value-creation programs for the operation of crude Distillation and Treating Units in order to operate safely, reliably, and economically as well as achieve target goals while realizing company strategic imperatives.As the successful candidate you will be required to perform the following: Perform in-depth plant monitoring and optimize performance of CDU/VDU units by overseen unit’s operation and economics losses. Ensure issuing detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables. Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvementsPerform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.You will be assigned the Lead Role in process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability. Prepare design request, budget justifications and detailed implementation plans for economically justifiable projects. Also, develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.Train younger or less- experienced engineers by providing necessary guidance, assessing strengths and skills in need of improvement. Serve as technical mentor/ advisor to enhance the technical knowledge of the engineers through practical field discussions, demonstrations and/or simulations using available engineering aids.Requirements:You must hold a Bachelor’s degree in Chemical Engineering from a recognized and approved program.An advanced degree is preferred.You should have a minimum 15 years of total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.Exposure to different licensor technologies for Hydrocarbon treating is a plus as well as familiarity with Honeywell UOP or Axens licensed units.You must be Certified PHA/HAZOP leader.Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units are preferred.

Role Description:We are seeking a Safety Advisor to join our partners Loss Prevention organization (LP), which is the corporate safety organization within our partners.We provide both day-to-day in-field occupational and process safety support to our partners operations, as well as centralized technical support and consulting function. Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all our partners facilities and departments that are located throughout the Kingdom.Your primary role as a Safety Advisor (Loss Prevention Advisor) is to provide daily support to company facilities and departments, helping them effectively implement our partners Safety Management System expectations and associated programs, as well as assuring compliance to all company safety requirements.  Our partner occupies a unique position in the global energy industry.They are the world's largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer. With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.Responsibilities:As the successful candidate, you will have the requisite knowledge, skills, and experience to:Facilitate implementation of our partners Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.Conduct field inspections/reviews to assess compliance to company and international codes and standards, identify safety concerns, formulate solutions, and develop practical and cost-effective corrective actions.Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.Participate in worksite contractor safety management activities (e.g., contractor selection and prequalification, monitoring of work site compliance, and measurement of performance).Support the reporting, classification and investigation of all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.Deliver Loss Prevention-specific training to employees, contractors, and outside parties.Mentor other Loss Prevention personnel.Requirements:As the successful candidate, you will either:Hold a BA/BS degree from an Accredited Institution, and seven years of experience areas in the oil and gas, petrochemicals, or related industries, such as: operations and maintenance, plant engineering, construction, turnaround and inspection, safety program development, process safety, and audits/assessments.Have fifteen years of relevant industry experience in the oil and gas, petrochemicals, or related industries, including a strong track record in delivering results, as referenced above, without a degree.Working Environment:Our partners high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.At our partners, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.Our partner has a proud history of educating and training their workforce over many decades.Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.

Responsibilities:Carry out economic Modeling to support development as part of commerciality assessmentPerform economic evaluation to support fast-paced development decisions and work closely with support functions including Corporate Finance, Strategy and Reserves groupsCarry out Risk & Uncertainty assessment of technical and financial componentsPerform Specific scenario planning and sensitivity studies as directed by ManagementWork closely with multi-disciplinary teams to strategize and implement field development plansConversant with Reserves estimation, validation and booking for unconventional playsConversant with business planning process. Short- & Long-range planning, portfolio ranking.Provide economic & operational benchmarking of North American Unconventional PlaysDevelop and implement new work processes, best technical practices, governance and controlsCoach and mentor less experienced Saudi engineers and effectively explain ideas, concepts, and techniques. Represent in external forums.Requirements:Bachelor's degree in Petroleum engineering or related science as appropriate to the required discipline. An advanced degree in Petroleum Economics or Statistics would be an advantage.We are targeting 12-15 years’ experience with at least 5-8 years in unconventional plays including shale, tight sand or channel reservoir. Experience in unconventional hydrocarbon basins required. Preference will be given to candidates with experience in unconventional green field development. Knowledge of the following applications (or similar) is required: PEEP, MOSAIC, Enersight, PVTsim, ProjectRA and Spotfire.

Responsibilities:As the successful candidate you will be required to perform the following:Monitor facility operating and ensure business plans objectives are consistent and in-line with environmental protection policy and all applicable environmental policies, GIs and standards.Identify deviations and developing solutions to environmental problems to ensure mitigation of facilities environmental risk and improve compliance to company and governmental environmental regulations.Conduct full potential environmental assessment and provide recommendations.Develop, review and implement Green House Gas management program including GHG data collection, analysis and reporting. Conduct internal GHG assurance audit and provide support in preparation of facilities GHG 3rd party audits.Monitor the solids and chemical disposals to guarantee a safe environmental protection in compliance with governmental regulations.Monitor air quality, waste water and water conservation, waste management performance.Establish environmental KPIs targets in alignment with company environmental policies and strategies Develop, review and deployment of facilities environmental management system in alignment with ISO 14001.Develop and maintain Environmental procedures and guidelines.Conduct internal environmental performance benchmarking studies among the oil and gas, refineries.Lead and support the development of solutions focused on emissions monitoring, tracking, and reduction.Stay abreast of international and regional regulations concerning emissions, waste management, water and waste water, GHG to ensure alignment with compliance standards.Collaborate closely with stakeholders, including field engineers, top-level executives, and regulatory bodies, to ensure alignment with industry needs.Analyze complex data sets related to emissions, equipment efficiency, and other relevant parameters, deriving actionable insights for enhancement.Oversee the program lifecycle, from ideation to deployment, ensuring timely delivery and continuous improvement.Organize technical exchange workshops among the oil and gas refineries.Develop and deliver training material to promote environmental awareness among refinery personnel.Requirements:You must have a Bachelor Degree in Chemical or Environmental Engineering.You should have at Least 10 years of experience in oil and gas refineries.Knowledge of the oil & gas, refining industry and its environmental challenges and risks.Knowledge of global / governmental environmental policies, regulations and standards.EPI/QEP certified professional (preferred). Expert in technical sustainability data, calculation methodology and limitations.Strong analytical and troubleshooting skills in the field of environmental engineeringFamiliarity with ISO-14001 Environmental Management System and RequirementFamiliarity with development of decarbonization roadmap, GHG emission baseline and target settingPossess excellent computer skills as well as presentation skills.Strong management and coordination skill.Good command of English, both verbal and written. Ability to work under pressureThe candidate should be familiar with ISO-14001 Environmental Management System and substantial experience in environmental regulations and standards. Also, candidate should have work experiences with overall refinery environmental performance calculation, daily monitoring and reporting. Identify deviations and developing solutions to environmental problems. Perform waste minimization assessments and advise on the handling, treatment, and disposal of solid, liquid, hazardous and toxic wastes. Experience in establishing environmental business plans objectives, emission baseline and setting targets of key performance indicators such as flaring, SO2 emission and Hydrocarbon discharge to marine. Additionally, candidate is preferred have adequate knowledge and experience in Green House Gas (GHG) management, strong data collection and data analytic experience to observe the GHG reduction opportunities and advise to improve the performance. Strong management and coordination skills are necessary to lead and work with environmental teams in operating facilities under the Global Manufacturing Excellence.

Skills

Industry

Location

Jobtitle

20 hydrocarbon Jobs found

Fire and Gas Technician

ASC-Portfolio Evaluations Geoscientist - UR Assessment & Data Solution

ASC Civil Structural Design Engineer

AOC - Planning & Performance Management Specialist

Mechanical Piping Engineer

Gas Processing AI Engineer

Process Engineer - Distillation

ASC - Safety Advisor (Loss Prevention)

Petroleum Engineer (Economics & Strategy)

Environmental Engineer - Waste Water ( GM )

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

20 hydrocarbon Jobs found

Fire and Gas Technician

ASC-Portfolio Evaluations Geoscientist - UR Assessment & Data Solution

ASC Civil Structural Design Engineer

AOC - Planning & Performance Management Specialist

Mechanical Piping Engineer

Gas Processing AI Engineer

Process Engineer - Distillation

ASC - Safety Advisor (Loss Prevention)

Petroleum Engineer (Economics & Strategy)

Environmental Engineer - Waste Water ( GM )

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.