Process Safety Engineer

ASC - Safety Advisor (Loss Prevention)

Chemical Engineer

Safety Engineer (Loss Prevention) 

Safety Engineer - Drilling Workover Operation

Responsibilities:We are seeking a Process Safety Engineer to join our Juaymah NGL Fractionation Department. JNGLFD is one of the largest NGL Fractionation centers worldwide that is responsible for providing fractionated feedstock to the petrochemical industry.Your primary role will be the development, maintenance and implementation of the company safety management system, environmental management system and support project activities during detail design, construction and commissioning phase of the project.As the successful candidate you will be required to perform the following:Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.Identify and evaluate hazardous conditions and practices in the workplace.Undertake surveys to identify and evaluate occupational health, safety and environmental conditions. Participate in various process safety studies/activities, such as: PHAs, HAZOPs, JSAs, PSSR, SIMOPs, incident investigations, compliance reviews, or insurance surveys.Participate in or lead risk studies and conduct consequence analyses, and review engineering designs for compliance with company and industry safety standards.Conduct and coordinate on-site inspections to audit physical conditions and safe work practices.Provide advice and counsel concerning compliance with corporate safety regulation and procedures. Perform work permit reviews, behavior-based safety inspections, job site safety compliance inspections, including hazard analyses and safe work procedures, and prepare written reports and recommendations.Develop controls for identified hazards and coordinate the implementation of controls from results of hazard analyses.Requirements:As the successful candidate you will hold a Bachelor’s degree in Safety, Chemical or Mechanical from a recognized and approved program.You should have a minimum of 8 years’ experience in refining /oil and gas plants /petrochemical industries.You must be able to demonstrate efficiency in the codes and standards in the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc.You should have working knowledge of oil/gas-related plant processes.You should have familiarity with development of process safety roadmap, and setting targets of safety key performance indicators.

Role Description:We are seeking a Safety Advisor to join our partners Loss Prevention organization (LP), which is the corporate safety organization within our partners.We provide both day-to-day in-field occupational and process safety support to our partners operations, as well as centralized technical support and consulting function. Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all our partners facilities and departments that are located throughout the Kingdom.Your primary role as a Safety Advisor (Loss Prevention Advisor) is to provide daily support to company facilities and departments, helping them effectively implement our partners Safety Management System expectations and associated programs, as well as assuring compliance to all company safety requirements.  Our partner occupies a unique position in the global energy industry.They are the world's largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer. With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.Responsibilities:As the successful candidate, you will have the requisite knowledge, skills, and experience to:Facilitate implementation of our partners Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.Conduct field inspections/reviews to assess compliance to company and international codes and standards, identify safety concerns, formulate solutions, and develop practical and cost-effective corrective actions.Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.Participate in worksite contractor safety management activities (e.g., contractor selection and prequalification, monitoring of work site compliance, and measurement of performance).Support the reporting, classification and investigation of all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.Deliver Loss Prevention-specific training to employees, contractors, and outside parties.Mentor other Loss Prevention personnel.Requirements:As the successful candidate, you will either:Hold a BA/BS degree from an Accredited Institution, and seven years of experience areas in the oil and gas, petrochemicals, or related industries, such as: operations and maintenance, plant engineering, construction, turnaround and inspection, safety program development, process safety, and audits/assessments.Have fifteen years of relevant industry experience in the oil and gas, petrochemicals, or related industries, including a strong track record in delivering results, as referenced above, without a degree.Working Environment:Our partners high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.At our partners, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.Our partner has a proud history of educating and training their workforce over many decades.Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.

Responsibilities:Perform process troubleshooting and address chronic operational problemsConduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutionsProvide technical guidance and field support for process related issues in the plantLead investigations and HAZOP’sCarry out detailed design reviews of plant modifications and support the implementation of projectsDevelop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiencyMentor and develop young engineers.Maintain the highest standards of integrity, engineering ethics and professional conduct.Requirements:Hold at least a BS degree in chemical engineering from a recognized university.Minimum of 10 years’ industry experience preferably at operating facilitiesBe able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performanceHave significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning & startup)Have experience in process safety management systems & tools such as HAZOPs and MOC’sPossess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)Professional Engineering, Chartered Engineer or equivalent certification is desirable.Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancementsMust have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.

Role Description:We are seeking a Safety Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib.Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.Your primary role as a Safety Engineer (Loss Prevention Engineer) is to provide daily support to company facilities and departments, helping them effectively implement the Safety Management System (Occupational & Process Safety) expectations and associated programs, as well as assuring compliance to all company safety requirements.  Responsibilities:As the successful candidate, you will have the requisite knowledge, skills, and experience to:Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.Conduct field inspections/reviews to assess compliance to company and international codes and standards, identify safety concerns, formulate solutions, and develop practical and cost-effective corrective actions.Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.Participate in worksite contractor safety management activities (e.g., contractor selection and prequalification, monitoring of work site compliance, and measurement of performance).Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.Deliver Loss Prevention-specific training to employees, contractors, and outside parties.Mentor other Loss Prevention personnel.Requirements:As the successful candidate, you will hold a Bachelor degree in Engineering or Engineering Technology from an Accredited Institution, and seven years of experience as a safety professional in the oil and gas, petrochemicals, or related industries, including a strong track record in delivering results.The experience should be comprehensive, covering both occupational and process safety.You will have an excellent ability to communicate in English with peers as well as members of management, and be able to produce clear and concise oral and written reports in English.Working Environment:Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.At our client, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Role Description:We are seeking a Safety Engineer focusing on Drilling & Workover Operations to join the Loss Prevention organization (LP), which is the corporate safety organization. We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function. Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.The primary role as a Safety Engineer (Loss Prevention Engineer) is to is to provide daily support to upstream organizations to provide field and office safety support to manage safety in petroleum engineering, exploration, drilling and workover related activities, including unconventional resources and seismic operations.Responsibilities: As the successful candidate, you will have the requisite knowledge, skills, and experience to:Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.Inspect to onshore and offshore drilling rigs, workover equipment, and other support facilities and have in-depth knowledge of well control equipment and procedures (i.e., attended Basic Well Control School).Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.Develop and/or review corporate safety standards, instructions and procedures related to upstream operations and formalize them into company-documented practices as required.Review designs of oil and gas field facilities for compliance with company and industry safety standards.Assist in the development of Emergency Response Plans for credible scenarios. Attend emergency drills as observer and provide feedback.Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.Deliver Loss Prevention-specific training to employees, contractors, and outside parties.Mentor other LP personnel.Requirements:As the successful candidate, you will hold a bachelor's degree in any engineering discipline from an Accredited Institution, and seven years of relevant oil and gas upstream industry experience, including a strong track record in delivering results.  This would include areas such as: Drilling & Workover operations; well planning and approval; reservoir management; geology and geophysics; project management for upstream facilities development; oil & gas field development; simultaneous operations (SIMPOS) between upstream and construction/downstream operations; offshore and onshore drilling rig safety inspections; managerial audits/assessments; and safety program and emergency response plans development.You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.Have a working knowledge of the Incident Command System (ICS).Working Environment:Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.

Skills

Industry

Location

Jobtitle

5 hazops Jobs found

Process Safety Engineer

ASC - Safety Advisor (Loss Prevention)

Chemical Engineer

Safety Engineer (Loss Prevention)

Safety Engineer - Drilling Workover Operation

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

5 hazops Jobs found

Process Safety Engineer

ASC - Safety Advisor (Loss Prevention)

Chemical Engineer

Safety Engineer (Loss Prevention)

Safety Engineer - Drilling Workover Operation

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.