ASC- Process Engineer - CCR Platformer

Chemical Engineer

Process Engineer - Sulfur Recovery / Sour Water Stripper

Senior Mechanical Inspector

Process Engineer - Utilities

Process Engineer - Crude Distillation

Responsibilities:As the successful candidate you will be required to perform the following:Provide engineering technical support to the Refinery Operations.Perform unit monitoring and performance evaluations.Conduct troubleshooting/assisting operations divisions in resolving Operations related problems.Monitor Advance Process Control and alleviate the constraints to maximize APC utilization.Conduct catalyst performance analysis, yield estimates and life cycle estimation.Lead HAZOP, MOC, Root Cause analysis and incidents investigations.Prepare annual and long range operating plans and objectives.Identify the units constraints and perform debottleneck studies.Conduct engineering studies to improve refinery gross margins.Conduct energy audits and surveys to improve refinery energy performance and energy KPI’s.Provide capital project design reviews and commissioning support.Involve in development of procedures and reviews.Requirements:You must hold a Bachelors degree in Chemical Engineering from a recognized and approved program. You should have a minimum of 10 years of experience in CCR/Platforming and Naphtha Hydrotreating.Experience in the Crude Unit, Diesel Hydrotreating, Penex ISOM, Merox Units, Amine Treating and Sulfur Recovery Units will be an advantage.You must have a thorough knowledge of engineering practices, international standards, and economic principles.

Responsibilities:Perform process troubleshooting and address chronic operational problemsConduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutionsProvide technical guidance and field support for process related issues in the plantLead investigations and HAZOP’sCarry out detailed design reviews of plant modifications and support the implementation of projectsDevelop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiencyMentor and develop young engineers.Maintain the highest standards of integrity, engineering ethics and professional conduct.Requirements:Hold at least a BS degree in chemical engineering from a recognized university.Minimum of 10 years’ industry experience preferably at operating facilitiesBe able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performanceHave significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning & startup)Have experience in process safety management systems & tools such as HAZOPs and MOC’sPossess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)Professional Engineering, Chartered Engineer or equivalent certification is desirable.Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancementsMust have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.

Responsibilities:Review and monitor the performances of existing SRU & SWS facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. Issue quarterly SRU & SWS performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.  Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.  Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having SRU & SWS process technologies. Execution and deliverables of the workshops will be based on Benchmarking & Best Practices Exchange Agreement among Global Manufacturing facilities.  Issue by-monthly SRU & SWS technical best practices bulletin for sharing within Global Manufacturing facilities. Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of SRU & SWS which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned. In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification. Conduct internal assessments on SRU & SWS process engineering standards using  engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or  Central Engineering. Support the implementation of relevant engineering standards to SRU & SWS across Global Manufacturing upon each facility management’s approval. Act as the Admin Area overall coordinator for cascading and driving Global Manufacturing and Corporate programs to the operating facilities for execution and effective monitoring. Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations. Recommend and coordinate proven technology deployments in SRU & SWS process units. Liaise with Global Manufacturing Excellence-Manufacturing Technical Support Division and Engineering Services for any technology assessment and piloting support. Participate as subject matter experts on external benchmarking with 3rd party entities, which include but not limited to, Japan Cooperation Council Petroleum (JCCP) and Gulf Downstream Association (GDA). Participate in SRU & SWS hazard operability (HAZOP) and safety integrity level (SIL) studies as required by operating facilities. Participate in incident investigation activities concerning SRU & SWS process technologies as required by operating facilities. Act as overall coordinator on any SRU & SWS data required by Global Manufacturing Affiliate Affairs from  wholly-owned facilities.Requirements:You must have a Bachelor’s degree in Chemical Engineering or related specialization. An advanced degree is preferred.You should have a minimum of 15 years total refinery or gas plants process units experience (process engineering and operations) with at least 10 years’ experience in handling SRUs/TGTU/SWS plants.Exposure to different SRU/TGTU process licensor technologies is a plus.

Responsibilities:As the successful candidate you will be required to perform the following:Perform field troubleshooting in a daily basis or as requested.Participate on major T&Is and emergency plant shutdowns.Develop and review mechanical inspection procedures and best practices.Write recommendations and reports related to mechanical inspection activities.Develop and review pre and post-T&Is reports.Develop and review mechanical inspection strategies.Participate in field mechanical inspections, quarterly schedule inspections and assessments.Review and propose NDT method and inspection procedures.Participate in Risk Based Inspection (RBI) studies.Participate in HAZOP Studies review.Set KPIs and monitor deployment and performance of mechanical inspection programs at facilities.Review performance and KPIs of mechanical inspection programs at facilities.Issue recommendations to enhance mechanical inspection programs deployment and performance.Requirements:You must have a Bachelor degree in Engineering.You should have a minimum of 15 years in the refinery and/or NGLF industry, specifically in mechanical inspection, with at least 10 years field experience working on plants major turnaround, field troubleshooting and inspection.You should have two of the following certificates: API-510, API-570 or API-653.You must have a thorough knowledge of best engineering practices, solid industry codes and standards background.Working environment

Responsibilities:As the successful candidate you will be required to perform the following:Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety. Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports. Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.Conduct internal assessments on Utilities using engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or  Central Engineering. Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring. Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.Requirements:You must hold a Bachelor’s degree in Chemical Engineering or related specialization. You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.Exposure to major equipment suppliers / package units for Utilities is preferred.

Responsibilities:As the successful candidate you will be required to perform the following:Perform in-depth plant monitoring and optimize performance of CDU/VDU units whilst overseeing the unit’s operation and economics losses.Issue detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvementsPerform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.Lead process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.As well as develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.Requirements:You must hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.You should have a minimum of 15 years total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.Exposure to different licensor technologies for Hydrocarbon treating is a plus.Certified PHA/HAZOP leader.Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units.

Skills

Industry

Location

Jobtitle

6 hazop Jobs found

ASC- Process Engineer - CCR Platformer

Chemical Engineer

Process Engineer - Sulfur Recovery / Sour Water Stripper

Senior Mechanical Inspector

Process Engineer - Utilities

Process Engineer - Crude Distillation

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

6 hazop Jobs found

ASC- Process Engineer - CCR Platformer

Chemical Engineer

Process Engineer - Sulfur Recovery / Sour Water Stripper

Senior Mechanical Inspector

Process Engineer - Utilities

Process Engineer - Crude Distillation

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.