Sr MFG & Process DVL Engineer - Automation Mechanical

Manufacturing Engineer

SAP Fiori Engineer (Hybrid)

SAP Senior Software Engineer (Hybrid)

Sr. Engineer - SAP Full Stack (Hybrid)

CNC Machinist IV

Test Laboratory Engineer

Customer Care Manager

Lead UI Engineer

SAP SD Functional Consultant

Responsibilities: Equipment design and debugging reception <ul><li>Work with vendors to set up/debug automation machine; Timely feedback and solve the problem to ensure the progress of the project</li></ul> Technical support <ul><li>Provide technical support to manufacturing during pilot run and production start-up/change over</li></ul> Problem solving <ul><li>Problem identification and trouble-shooting a wide range of complex mechanical problems for automation line</li><li>Responsible for the effective communication across the company</li></ul> Training guidance <ul><li>Instruct technicians and participate in automatic line maintenance and product changeover work</li><li>Line maintenance/change over together with/guiding the technicians to make sure automation machine run smoothly</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree, major in mechanical engineering/automation/mechatronics, the academic requirements can be relaxed for outstanding candidates</li><li>Minimum 5 years of experience w/ automated assembly machines, skilled in fixture/jig design and trouble-shooting for automation machine;</li><li>Familiar with Vision Inspection (Keyence/Cognex), Programmable Logic Controllers (PLC), Pneumatics, sensors, motors and other motion control devices and components selection;</li><li>Robot knowledge will be a plus;</li><li>Interfacing knowledge between mechanical and electrical;</li><li>Familiar with Pro-E or SolidWorks, AutoCAD software to create 2D and 3D drawing;</li><li>Proven strong analytical and problem solving skills, good interpersonal skills.</li><li>English skills, able to ready technical materials in English.</li></ul>

Responsibilities: <ul><li>Supplier Engineering Capability</li><li>Support Sourcing for new supplier qualification</li><li>Support Sourcing for supplier exit</li><li>Support SQE for supplier audit</li><li>Supplier assessment, to improve supplier capability</li></ul> New Project <ul><li>Support Sourcing for new product 安定quotation</li><li>As project leader (for Micro Lite project), to manage new project for on schedule approval</li><li>As manufacturing engineer, to support supplier for DFM and PFMEA etc. preparation and design review etc.</li><li>As manufacturing engineer, to support supplier for process and tool design and qualification</li><li>Follow up sample making issues and sample schedule which requested by customer or PDE. and work with cross function team members and supplier for improvement until approval</li><li>Work with PBL suppliers for packing design and qualification test</li><li>Work with supplier to get all engineering documents done</li><li>Work with SQE and supplier for safe launch process audit</li></ul> Sustain Product <ul><li>Work with Sourcing and supplier to review and improve capacity, including/lead copied tool qualification</li><li>Work with SQE and supplier to improve process yield and any quality problems</li><li>Follow EC change and 4M change</li><li>Follow material change (alternative), to work with team members to lead new material qualification progress</li><li>Follow supplier change or migration project (from company plant to PBL supplier), to work with cross function team members and supplier to follow qualification</li></ul> Productivity <ul><li>Work with suppliers and team members to find the improvement opportunities, such as process, material, plating, packing etc.</li><li>Follow VAVE project, work with supplier and team members to drive the project and cost reduction</li><li>Support Sourcing for cost reduction nego</li></ul> Capex Management and Equipment Maintenance <ul><li>Follow capex qualification, and work with Finance and Sourcing and PBL supplier to manage those capex well</li><li>Support PBL supplier to prepare equipment and tool maintenance plan and monitor the plan conducted well by supplier</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree and mechanical related background</li><li>Total Working experience 8 years above</li><li>Over 5 years Connector and / or Cable manufacturing engineering experiences</li></ul>

Responsibilities: <ul><li>Understanding the business needs and translating them into functional and technical requirements for the SAP Fiori platform.</li><li>Designing, developing, and implementing SAP Fiori apps using SAPUI5, JavaScript, HTML5, and CSS</li><li>Integrating SAP Fiori apps with other SAP solutions and systems</li><li>Optimizing the performance of SAP Fiori applications and ensuring their compatibility with multiple devices</li><li>Providing technical support and troubleshooting for SAP Fiori applications</li><li>Keeping up to date with the latest SAP technologies and applying them to improve the SAP Fiori platform.</li><li>Ensure Fiori applications are optimized for best performance.</li><li>Participate in application testing and deployment.</li><li>Handle basic issues and problems under direct supervision, while escalating more complex issues to appropriate staff.</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in computer science or equivalent experience,</li><li>Confirmed experience building front end or back end of application based on popular design patterns</li><li>Minimum of two years of related work experience</li><li>Preferred Qualifications</li><li>Experience as an SAP Fiori consultant or similar</li><li>Experience in SAP Fiori application design, development, and implementation</li><li>Strong understanding of SAP ABAP and UI5</li></ul>

Responsibilities: <ul><li>Apply software engineering patterns and principles to design, develop, test, integrate, maintain and troubleshoot complex and varied software solutions and incorporate security practices in newly developed and maintained applications.</li><li>Participate in peer code review sessions to review code, coach peers and ensure code quality.</li><li>Take the lead in the assigned agile team to adopt agile philosophies, facilitate agile ceremonies and identify continuous improvement opportunities.</li><li>Incorporate the companys engineering and development best practices within the full software development lifecycle including coding standards, code reviews, source control management, building processes, testing and security principles, to deliver high quality code rapidly.</li><li>Collaborate to lead demonstration and continuous feedback sessions to improve development and help drive the long term vision.</li><li>Participate in the engineering community by maintaining and sharing relevant technical approaches and modern skills.</li><li>Independently handle complex issues with minimal supervision, while escalating only the most complex issues to appropriate staff.</li><li>Other duties as assigned</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in a related field or equivalent experience</li><li>Confirmed experience automating pipelines for continuous integration, testing, delivery and security</li><li>Confirmed experience architecting applications, databases, services or integrations</li><li>Minimum of four years of related work experience</li></ul> Preferred Qualifications <ul><li>Experience within SAP ABAP, Fiori, and OOP</li><li>Experience with Enhancement framework, CDS Views, AMDP, BOPF</li><li>Experience with Odata, Web Services, PI/PO, MII, ALE, and idoc</li><li>Experience with Adobe forms</li><li>Exposure to Agricultural Commodity Management (ACM) or prior experience with Commodity Trading and Settlement.</li></ul>

Responsibilities: <ul><li>In depth knowledge of SAP ABAP/4 programming using BAPIs, BADIs, RFCs, IDOCs, Workflow, LSMW, Reports, SAPScript, writing user exits, BDC coding, and interfaces.</li><li>Designing and implementing workflows to automate business processes.</li><li>Support RICEF objects, Fiori apps, and B2B integrations (SOAP, IDOC, OData).</li><li>The SAP ABAP Developer should possess strong application development and system integration skills.</li><li>Experience in Fiori Design patterns, expertise in UI Theme designer.</li><li>Design, develop, and enhance SAP business applications using ABAP on the backend and SAP Fiori/UI5 for the frontend.</li><li>Build and extend existing Fiori applications using SAPUI5, HTML5, CSS, and JavaScript.</li><li>Troubleshoot and resolve complex issues in SAP modules (e.g., FICO, SD, MM) by analyzing root causes and implementing effective solutions.</li><li>Experience with Fiori/UI5 is highly desirable.</li><li>Enhance the user experience (UX) by designing intuitive and responsive Fiori/UI5 applications, incorporating Fiori Elements and smart controls.</li><li>Leverage BTP services to develop and deploy cloud-based applications and extensions.</li><li>Support ongoing development, implementation, and quality checks for existing projects/applications.</li><li>Participate in peer code reviews and learn and adapt to the companys engineering and development practices.</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in a related field or equivalent experience.</li><li>Confirmed experience automating pipelines for continuous integration, testing, delivery and security.</li><li>Confirmed experience architecting applications, databases, services or integrations.</li><li>Minimum of four years of related work experience.</li></ul> Preferred Qualifications <ul><li>Minimum 4 years of experience as an SAP developer or a similar role with a focus on SAP S/4, ECC, BW, SOLMAN, FIORI, GRC</li><li>Strong, well-rounded knowledge of SAP full life cycle implementations and SAP concepts / capabilities</li><li>Proficient in ABAP, EDI management, and SAP modules.</li><li>Proficiency in SAPUI5, HTML5, CSS3, and JavaScript</li><li>Experience working in Implementation, Upgrade, Maintenance and support projects</li><li>Experience of Designing, coding, and modifying SAP applications to meet specific requirements.</li><li>Strong background in SAP Gateway and OData services</li><li>SAP Certification is a plus.</li><li>Knowledge of SAP Cloud Platform and BTP is a plus.</li></ul>

Responsibilities : <ul><li>Set-up a range of 3, 4, and 5 axis CNC machine tools by installing and adjusting work holding devices, tooling, spindle liners and bar feeders.</li><li>Operate a range of 3, 4, and 5 axis CNC machine tools, ensuring that machine down time is minimised.</li><li>Verify programs and settings using a range of measuring equipment on first articles and apply appropriate adjustments and program modifications.</li><li>Ensure component compliance in accordance with engineering drawings and quality procedures using a range of inspection equipment.</li><li>Record daily operations on machine tools and provide operational equipment effectiveness (OEE) results daily.</li><li>Contribute to continuous improvement activities within the department. Improving processes and applying tools and methods from the our client site plan.</li><li>Maintain and improve time standards.</li><li>Ensure that daily maintenance is carried out as required.</li><li>Maintain a high level of housekeeping.</li><li>Observe health and safety regulations as laid down in company procedures and government legislation.</li><li>Adhere to company procedure at all times.</li><li>To support with any other ad-hoc tasks where required</li><li>To carry out any other reasonable tasks as may be requested from time to time by the business within Production or elsewhere as may be required.</li></ul> Requirements : <ul><li>Time served apprentice with C&amp;G/NVQ or equivalent in mechanical engineering discipline.</li><li>Experience working on alternating early/late shifts with minimal supervision.</li><li>Experience setting and operating 3, 4 and 5 axis CNC machine tools.</li><li>Experience of Fanuc, Citizen and Mazatrol is desirable.</li><li>Ability to interpret engineering drawings.</li><li>Experience using a range of measurement equipment.</li><li>Ensure compliance with all our client policies and procedures, EHS and safety first together with delivering exception ECE.</li><li>Driving and encouraging the values and key behaviours in all actions</li><li>Highest level of accuracy/attention to detail, to ensure standards of work are exemplary with minimal defect.</li><li>Organized and self-motivated to work with minimal supervision.</li><li>Demonstrate initiative, flexibility and willingness to take on additional tasks and responsibility in an efficient manner.</li><li>Excellent communication at all levels both internally and externally.</li><li>Fully flexible with tasks and the ability to multi-skill.</li></ul>

Responsibilities : <ul><li>Conduct electrical, mechanical, and environmental testing on our client products for the purpose of Engineering Evaluation and Qualification.</li><li>Prepare samples using hand tools and soldering.</li><li>Run a variety of computer and microprocessor-controlled test equipment.</li><li>Set-up &amp; operate environmental, mechanical and electrical test equipment</li><li>Review and summarize data.</li><li>Maintain the integrity of test results by complying with Corporate, Business Unit and local quality system requirements.</li><li>Review active test programs and final test results to ensure that performance requirements are met.</li><li>Capable of working to specifications, drawings, diagrams, and schematics.</li><li>Ensure all safety requirements are met and followed</li><li>Write test documentation and reports.</li><li>Perform other duties as assigned by management.</li><li>Overtime or temporary shift in hours may be required at times to support high priority business needs.</li></ul> Requirements : <ul><li>A preferred candidate should have, or be actively pursuing, an HNC or equivalent in Electronic or Mechanical Engineering, or have 3-5 years’ experience in testing.</li><li>Background of mechanical experience to aid fixture design and construction.</li><li>Good soldering skills and manual dexterity.</li><li>Hands on experience for tearing apart assemblies / sub-assemblies of electro mechanical parts</li><li>Good Conceptual, problem solving and Analytical Skills</li><li>Excellent verbal and written communication skills.</li><li>Excellent attention to detail</li><li>Knowledge of Six Sigma tools will be an added advantage</li><li>Proficient in MS Office Suite</li><li>Ability to work in a hands-on environment.</li><li>Ability to work well with others of diverse backgrounds.</li><li>Knowledge of Global Certifications and Regulatory Standards (UL, IEC, MIL etc.) is an advantage</li><li>Must be capable of multitasking and taking full ownership of assigned projects.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or UK Military controls.</li></ul>

Responsibilities: <ul><li>Analyse the technical complaints of the vehicle in the field visits.</li><li>Rectify defects in vehicles / overhaul aggregates.</li><li>Maintain and handle internet-based warranty.</li><li>Ensure implementation of service processes at channel partners.</li><li>Joint Investigation along with vendors.</li><li>Development of secondary channel.</li><li>Feedback on companies as well as competitors’ products.</li><li>Training of service managers.</li><li>Work out special service support for strategic customers with channel partners.</li><li>Ensure execution of spare parts order by all channel partners for sufficient inventory and for meeting spare parts target.</li><li>Secondary network for spare parts sales.</li><li>Guide channel partners for manpower/facilities/equipment optimisation.</li><li>Ensure profitability of workshops of channel partners.</li><li>MIS on service.</li><li>Spare parts inventory management.</li><li>Manging service guarantee at the dealership.</li><li>Monthly visit to ASC and monitor his performance along with ASC coordinator.</li><li>Service camps on monthly basics.</li><li>Monthly visits to customer and update M Response data</li></ul> Requirements: <ul><li>Technical knowledge of BS6 Products</li><li>Exp. in Commercial Vehicle Segment</li><li>Exp. in Dealership Management/Field Service Management</li></ul>

Role Description: <ul><li>We are seeking a UI Lead to help create our next-generation products that satisfy our customer’s needs.</li><li>The UI Lead will use their deep professional knowledge and an understanding of the customer environment to propose and develop new and innovative solutions to customer problems.</li><li>They will use their understanding of applied engineering, product lifecycle and technology advancement to help align and solve problems across multiple product lines using similar technology.</li><li>The successful candidate will be hands on and curious with a focus on technology, remote collaboration, the application of engineering principles, and the ability to influence cross functionally to achieve department goals.</li><li>This role will report to the Technical Program Manager and will work from our Pune office</li></ul> Responsibilities: <ul><li>Define the infrastructure and the software architecture for the React-based Front End related to a specific set of products and projects.</li><li>Act as a lead and a mentor to offshore teams, including code review, best practices, architecting, product thinking, and code quality.</li><li>Develop platform software and collaborate across engineering groups to maximize the use of common emerging platform technologies, conventions, technological building blocks.</li><li>Collaborate with Product Management, Architects and Product Owners from various teams and Executive leaders to define the business and technical strategy.</li><li>Collaborate with global engineering leads at various businesses to establish and drive adoption of conventions and innovation.</li></ul> Requirements: <ul><li>Education: Bachelors or higher degree in a related technical field (Electrical, Electronics Engineering/Computer Engineering)</li><li>8+ Years in front end development</li><li>5+ years in architecture, design, implementation, and/or support of a micro front end that consumes high distributed service-oriented architectures, having an architectural sense for ensuring availability, reliability, scalability and security.</li><li>Experience with UI and UX concepts using modular and reusable UI components.</li><li>Experience with refactoring large code bases using safe techniques.</li><li>Experience building CI/CD pipelines. DevOps and Devsecops, version control, and system testing with Gitlab and Jenkins</li><li>Experience creating and obtaining actionable insights from Datadog, Elasticsearch, Prometheus, and Grafana</li><li>Experienced with programming and scripting languages such as JavaScript, CSS, React.js, GO</li><li>Willingness to learn and teach complex technologies.</li></ul>

overview: <ul><li>We are seeking for an experienced SAP SD Functional Analyst who has been through at least a FULL life-cycle implementation for S/4HANA.&nbsp;</li><li>Candidate must possess thorough understanding of SD-related Simplification items in S/4HANA and has played a key SD functional role in Testing, Data Migration and Cutover during their previous S/4HANA implementation.</li><li>Candidate should process strong SD business background, has hands-on with the related configurations and able to perform deep analysis to develop high quality work including functional and technical specifications.</li><li>Candidate will need to be detail oriented, a good team player and has excellent communication skills to work with cross-functional teams and business. This is key for supporting the various S/4HANA implementation phases including Integration Testing, User Acceptance Testing and Mock/Actual Cutovers.</li></ul> Responsibilities: <ul><li>Hands on role in Test scope definition and Test scripting. Unit Test and String Test execution after code remediation. Perform end-to-end Integration Testing and supporting User Acceptance Test.</li><li>Perform Data Validation using Clients selected tools during each data migration cycle.</li><li>Coordination across multiple tracks and functions for Cutover discussion and activities.</li><li>Deep-dive analysis of issues identified throughout Testing, Business Data Validation and Cutover cycles. </li><li>Work across teams for triaging issues and resolution under time pressure.</li><li>Execute projects, setting project deliverables priorities, monitoring, reporting on the process, progress, risk, and result. Effectively communicate project status to the project stakeholder on a regular basis.</li><li>Partner with business to ensure their expectations are met and managed. Ensures consistent delivery of quality projects and adhere to Clients Project Life Cycle.</li></ul> Requirements: <ul><li>Bachelors Degree from accredited university in Computer Science/Information Technology/Engineering.</li><li>5-8 years of experience.</li><li>At least one FULL life-cycle implementation of SAP S/4HANA.</li><li>At least 6+ years of SAP SD working experience in high tech manufacturing/OEM or consumer product environment.</li></ul>

Skills

Industry

Location

Jobtitle

101 equipment testing Jobs found

Sr MFG & Process DVL Engineer - Automation Mechanical

Manufacturing Engineer

SAP Fiori Engineer (Hybrid)

SAP Senior Software Engineer (Hybrid)

Sr. Engineer - SAP Full Stack (Hybrid)

CNC Machinist IV

Test Laboratory Engineer

Customer Care Manager

Lead UI Engineer

SAP SD Functional Consultant

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

101 equipment testing Jobs found

Sr MFG & Process DVL Engineer - Automation Mechanical

Manufacturing Engineer

SAP Fiori Engineer (Hybrid)

SAP Senior Software Engineer (Hybrid)

Sr. Engineer - SAP Full Stack (Hybrid)

CNC Machinist IV

Test Laboratory Engineer

Customer Care Manager

Lead UI Engineer

SAP SD Functional Consultant

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.