ASC Electrical Engineer

Electrical Engineer

Instrument & Electrical Reliability Engineer

Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate in failure investigations to capture the outcome and share with other facilities to avoid recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:Bachelor’s degree of Electrical Engineering.Minimum 15 years of experience (20+ preferable) in refining/petrochemical industriesExperience performing electrical power system studies utilizing ETAP modeling (preferred)Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation (preferred).Fluent in English, oral and written.

About :Saudi Aramco Global Manufacturing is seeking an experienced Electrical Engineer to work under Assets Technical Solutions Department (ATSD) to handle electrical engineering aspects.The successful candidate should have a minimum of 15 years work experience preferably in oil and gas refining/petrochemical industries(20+ years is preferred) The candidate should be familiar with the topics of electrical safety and arc flash hazards mitigations, hazardous area classification, power generation, distribution and protection, motors and motors controls, AC/DC Systems, electrical studies and industry standards (NEC, IEC, NFPA, IEEE, NEMA, API, etc.).The electrical engineer main responsibility is to develop plans and processes to ensure facilities’ electrical equipment and systems throughout its lifecycle to reduce safety, environmental and economic risk, while maintaining compliance with all applicable codes and standards. The engineer will be responsible for providing technical support on major and critical electrical issues. The applicant should be a strong team player who will interface and work with multiciliary teams. Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate in failure investigations to capture the outcome and share with other facilities to avoid recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:Bachelor’s degree of Electrical Engineering.Minimum 15 years of experience (20+ preferable) in refining/petrochemical industriesExperience performing electrical power system studies utilizing ETAP modeling (preferred)Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation (preferred).Fluent in English, oral and written.

Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate failure investigations to capture the outcome share with other facilities to eliminate recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:You must hold a Bachelor’s degree of Electrical Engineering.You should have a minimum of 15 years of experience in refining/petrochemical industries.Experience performing electrical power system studies utilizing ETAP modeling is preferred.Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems is essential.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation is preferred.You should also be familiar with topics of electrical safety and arc flash hazards mitigations, hazardous area classification, power generation, distribution and protection, motors and motors controls, AC/DC Systems, electrical studies and industry standards (NEC, IEC, NFPA, IEEE, NEMA, API, etc.)

Responsibilities:People ManagementAdvise and assist Maintenance l&E Engineers, electricians, instrument technicians and production supervisors on complex electrical and instrument repairs and troubleshooting methodologies.Support all the efforts towards building a harmonious work environment to promote the spirit of cooperation and team building within the l&E Reliability Section.Provide required technical support in matters requiring higher level of expertise and consultation. Instrument & Electrical Assets IntegrityDevelop and implement Reliability strategies by utilizing conventional techniques such as Reliability Centred Maintenance (RCM), Root Cause Analysis (RCA), Preventive and Predictive maintenance (PPM) strategies, and other industry accepted reliability techniques to analyse l&E equipment failures and produce cost effective strategies to ensure safe and reliable operation of the plant.Implement Mechanical Integrity & Quality Assurance best practices. Work with other concerned departments to develop & execute appropriate Quality Assurance (QA) practices and develop a mechanism to assess the effectiveness of QA practices.Proactively identify l&E Equipment Reliability Issues and develop engineering solutions for chronic and sporadic equipment reliability problems. Work with technical, production and maintenance to implement solutions.Lead Reliability Improvement efforts of the plant from the platform of Reliability Improvement Teams (RITs).Perform Root Cause Failure Analysis to identify various failure modes and recommend strategies to help improve l&E equipment reliability.Evaluate RCA reports, criticality studies, equipment strategies, and risk assessments on equipment to ensure consistency and compliance with company procedures and policies.Evaluate facility incidents that affect reliability and ensure that appropriate RCAs are performed.Assist in tracking RCA findings and completing action items in a timely manner .Develop Instrumented Protective Systems (IPS) related work processes in the company to comply with regulatory requirements mandated both by International Standards (IEC61511/ISA 84) and Company Standards RMS 5700.Administer the development of detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection drawings, loop drawings, Instrument data sheets etc.Prepare technical inquiry requests to vendors, participate in the technical evaluation of vendor bid offers.Review vendor drawings and documents and review design calculation. Ensure vendor equipment specifications meet the design specifications and are within budgeted costs.Reviews equipment specs/designs to ensure equipment can meet reliability objectives.Participate as a technical adviser on capital projects and turnarounds.Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications.Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required.Review and optimize ITPMs for functionally critical l&E equipment (MICE).Drive consistency in l&E equipment design across the site as part of projects review including consistency in maintenance strategies.Provide communication to area resources about improvement projects.Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects.Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets.Champion continuous improvement fosters relationships between various plant functions to focus on total quality. Policies, Systems, Processes and ProceduresContribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes and practices taking into account ‘international leading practices in order to improve productivity and operational efficiency.Provide critical input to support the development of l&E Reliability Section’s systems, policies, processes, and procedures in order to meet business requirements.Ensure team members comply with all l&E Reliability Section’s policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. ReportingPrepare relevant reports in a timely and accurate manner in order to meet the departmentalPrepare relevant reports in a timely and accurate manner in order to meet the departmental requirements, policies and standards.Support supervisor in the preparation of the annual operating and capital budgets. Ensures reliability projects and activities are completed on time and within budget.Communicate ideas, present, and explain technical knowledge to stakeholders.Communicate to Supervisor to inform on issues that require additional follow up.Report incidents and near misses and participate in investigations as required. Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high quality products/ services. Requirements:ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the fields of Electrical equipment & systems maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals IndustryOther Job Specific Requirements and/or Vocational AccreditationsWell conversant with protection and control systems of a large process plant involving High and Medium Voltages (132/33/6KV).Solid understanding of the concepts of electrical protection system design and intelligent protection relays operation.Experience in failure mode & effect analysis and good understanding of failure mechanisms of Electrical equipment.Troubleshooting techniques and ability to analyze and resolve engineering problems independently.Knowledge of relevant IEC and IEEE Standards and or other well recognized standards.Familiarity with ETAP and similar system modeling and analyzing tools would be an additional advantage.Relevant experience in having performed load flow & short circuit studies, Relay discrimination and coordination studies for an industrial electrical distribution system.Familiarity with CMMS preferably SAP.Sound understanding of industrial PLC and Packaged control systems. EducationRequired (Qualification1 / Discipline): ﻿Bachelor’s degree in electrical/ Electronics/Instrumentation Engineering. ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the field of Instrumentation &Controls maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational AccreditationsKnowledge of automation/control systems, including: DCS, PLC, Safety Instrumented Systems, function block and ladder logic programming, industrial instrumentation, electrical equipment and process analytical systems.Experience with design and maintenance of Plant Instrumentation, Control Valves, and Safety Instrumented Systems and process safety management programs.Functional Safety Certification as Functional Safety Engineer (FS Eng.) preferred.Hands on experience on the use of ExSILentia software preferred.Working Knowledge on International Standards related to Instrumentation and Controls design and maintenance such as IEC, ISA, FCI etc. as well as Functional Safety standards IEC61511/ISA 84.Experience in failure mode & effect analysis and good understanding of failure mechanisms of instruments employed in a process industry.Troubleshooting techniques and ability to analyse and resolve engineering problems independently. 

Responsibilities:Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.Review Project Proposals and Detailed Designs packages for new facilities.Develop and maintain the UR engineering standards and design best practices.Participate on the testing & commissioning of the new facilities and Turnaround and Inspection (T&I).Update and maintain engineering documentation and drawings.Analyze system performance and find solution for Energy saving.Ensure quality, cost effective and timely solutions to any upgrade.Report and analyze key performance indices.Make recommendations for technical/economic optimization of existing facilities.Assists in the training, development and mentoring of younger staff.Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.Requirements:Bachelor's Degree in Electrical Engineering from an accredited university. A higher degree is preferred. A Professional Engineer (P.E.) registration is desirable but is not essential.Minimum of 15 years working experience in Electrical engineering, with at knowledge and experience in the field of Oil and Gas Industry.You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, Lighting. Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination and setting using software like ETAP is essential.You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.Be able to conduct failure analysis and provide recommendations for failed electrical equipment. Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.You should be able to communicate with multidiscipline engineers to complete projects.Have proven ability to communicate effectively with strong written and oral communication skills.You must be willing to work in remote areas depending on the project or task assignments.

Skills

Industry

Location

Jobtitle

5 etap Jobs found

ASC Electrical Engineer

Electrical Engineer

Electrical Engineer

Instrument & Electrical Reliability Engineer

Electrical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

5 etap Jobs found

ASC Electrical Engineer

Electrical Engineer

Electrical Engineer

Instrument & Electrical Reliability Engineer

Electrical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.