Instrument Technician

Fire and Gas Technician

Supervisor, Qatarization Development

Buyer

Shift Supervisor (Warehouse)

Process Engineer

Control System Engineer

Process Operator

Instrument & Electrical Reliability Engineer

Estimator

Responsibilities:Routine Duties:Carryout maintenance activities in an efficient manner, in line with the annual business plans, and departmental policies and procedures.Complete all assignment of tasks, performance appraisal, training, and maintain proper tools and equipment in order to make sure the unit equipment perform reliably.Carryout troubleshooting of problems occurring in the units and implement corrective actions.Shutdowns and Turnarounds:Assist in planning, organising, and implementing shutdowns, turnarounds, and emergencies in order to ensure safe and timely execution of tasks.Assist in identification of shutdown and turnaround activities, spare, scheduling and JSA.Plant Maintenance:Ensure that work processes are implemented as per standards and procedures.Maintain high level of availability of the instrumentation within area of responsibility.Identifies spare parts requirement of each equipment. Identifies required special tools to carry out his activities.Requirements:Min 3 - 5 years of experience in Oil and Gas, Chemical OR Petrochemical industry.Bachelor/ Diploma in Electronics and Instrumentation OR Electronics and Communication.

Responsibilities:Preventive and Corrective Maintenance:Periodic Calibration for Hydrocarbon detectors, H2s, Oxygen, Smoke, Heat, Flame Detectors, Manual Call Points and Manual Push Button Stations.Periodic Inspection and Functional Test for Fire and Gas Alarm, to ensure all Safety System devices functioning as per the Cause and Effect Chart.Telecommunication System:Preventive and Corrective Maintenance of Public Address and Emergency Notification System throughout the Plant.Regular functional test in coordination with Fire department.Management of Fire and Gas, Telecommunication Maintenance Programs:Development and regular review of Standard Maintenance Procedures for Fire and Gas Systems.Involvement and Executive Preventive Maintenance programs like creating Material Master list by providing min/ max numbers, assigning inspection frequency based on manufacturer recommendations.Incoming material inspection, etc.Requirements:Min 3 years of experience withing Oil and Gas/ Chemical/ Petrochemical industry.Bachelors in Control and Instrumentation / Electronic / Electrical Engineering.

Job Purpose / Objective:Administer development process through providing induction, familiarization and orientation sessions andprograms to Developer, trainees, students and interns as well as career counselling and advice related to learning and development across the company. Is primarily responsible for the design of development plans, counselling on performance, and conducting need analysis of training courses. Analyse and update the plans, provide input to the QIS system, supervise summer trainees and internships, scholarship and FE students and act as liaison representative to a number of external agencies, institutions and partners.Responsibilities:Strategic Plans and the E&I Sector Reporting (QIS):Assist in assuring departmental plans are up-dated and complete each year in order to ensureoperational efficiency visa the process.Contribute to the provision of data input to the Qatari Information System (QIS) database in order to becompliant with Qatar Petroleum requirements.Contribute to the E&I Sector Awards submission as well as to the drafting of the E&I Sector report.Further Education (FE) Administration:Support Managers in submitting their FE nominations as per QP guidelines &  policies, procedures and strategic objectives.Assist departments with their FE applications to ensure they meet the criteria. Advise and make recommendations to assist with the process.Provide support and assistance to administrative and financial arrangements for FE students in order to ensure that the FE process progress smoothly.Act as a  focal point to liaise with QP to ensure all the students’ support, monitoring, and reporting are in place and up to date.Participate in the annual budget preparation related to FE.Assist with ensuring status reports pertaining to FE student’s employees are prepared and circulated to Chiefs and Managers.Scholarship:Implement the  Scholarship strategy to meet development needs in accordance withthe corporate strategic Plans.Communicate the Scholarship approach to departmental heads, supervisors and coaches in order to ensure operational continuity and have clarity around the process.Communicate and follow up with QP with regards to fulfil scholarship yearly demands.Participate in E&I sector Education Program Committee’s (EPC) interviews and meeting as needed.Liaise with QP to ensure the implementation of scholarship students training plans and assure the students are engaged with the employees through effective monitoring.Implement and follow up on all administrative and financial arrangements to ensure scholarship students retention.Participate in the annual budget preparation related to scholarships.Summer Trainees and Internships:Plan, implement and coordinate summer training and internship programs and communicate effectively to key partners.Ensure all students have a formal training plan and contract in order to yield the higher outcome from theprograms and maximise the students learning and development opportunities.Ensure that administrative and financial arrangements (including participating in the yearly budgeting) areAligned with policy and students’ payment and recognitions are promptly and accurately completed and processed.Confirm that assigned departments are actively engaged with students and are kept abreast of their progress and achievement.Requirements:Bachelor’s degree in Business Administration or any related disciplineTotal of 5-7 years of experience in a similar position/ field.

Responsibilities: Overarching Activities:Handle end-to-end process for all purchase requisitions under framework agreement.Handle end-to-end process for low-value purchase orders not under framework agreement.Manage sourcing for tail end.Take ownership of purchase’s full lifetime, from order to delivery.Purchase Requests and Orders:Receive, verify, and act on purchase requisitions under framework agreement and low-value purchase requisitions.Examine purchase requisitions for completeness of technical details and information, interact independently with end users for correctness and warehouse for MM items before issue of RFQs.Review quotations before sending to end users and seek appropriate clarifications to resolve technical issues for Materials Master and Services Master items items and direct out items if possible.Seek technical and commercial clarifications from respective suppliers and communicate responses of suppliers to end users for final evaluation.Issue tender enquiries, open tender documentation, technical and commercial evaluation of suppliers to issue purchase orders and supply agreements.Biddings, Negotiations and Tenders: Negotiate with vendors to contract or award purchase orders in accordance with company policies and procedures.Obtain confirmation on specified items and conditions and tabulate prices of technically acceptable bidders to issue purchase order to lowest bidder.Monitor and control compliance with complex agreements and tenders.Prepare Tender Committee submissions and evaluate tenders and recommendations to Tender Committee participants.Lead price negotiations, agreements and progress monitoring while checking the quality of services/materials provided.Support investigation of any major issues/supply contract breaches in the procurement cycle to supervise the preparation of consequent action plans.Delivery and Expediting:Coordinate the interface of logistics (i.e. procurement, freight forwarders, transportation, and warehousing), to ensure efficient and timely delivery of materials.Monitor progress of suppliers and assure they are working within the deadlines.Coordinate actions with end-user focal points to set priorities and schedules.Ensure all permits/import licenses and Ministry of Interior clearances are obtained and maintained.Ensure that all proper customs requirements are understood and communicated to freight forwarders and vendors and other related government agencies.Contract Management:Understand and exercise pricing formula in framework agreements.Prepare Tender documents along with suitable pricing mechanisms/schedule in the form of Bills of Quantities, Schedules of Rates, Lump Sum prices, etc. for inclusion in Tender documents.Perform contractual and commercial evaluation of bids, with commercial tender tabulation, pricing and terms and conditions of the contract.Review/evaluate contractor claims, and report on validity.Review interim applications for payment verifying accuracy and compliance with the contract terms.Evaluate variations, change orders or concession requests with the contractor, and prepare documentation for approval.Maintain high quality of records and updates on contracts/tenders, contractors, etc.Responsible for contract administration (post award).Internal Customers & Supplier Relations:Communicate and discuss technical requirements and procedures with vendors/supplier to establish and maintain professional relationshipLiaise and regularly coordinate with internal customers and maintain proper track of purchase requisition to provide the best customer service within the company.Receive purchased materials and services and coordinate delivery to respective requestors.Policies, Systems, Processes and Procedures: Comply with and ensure other team members comply with all section’s policies, processes, standard operating procedures, and instructions so that work is carried out in a controlled and consistent manner.Provide critical input to support the development of the Section’s systems, policies, processes, and procedures to meet business requirements.Contribute to the identification of opportunities for continuous improvement of departmental systems, policies, processes, and practices considering ‘international leading practices’ to improve productivity and operational efficiency.Quality, Health, Security, Safety and Environment: Ensure compliance with regulatory requirements and relevant quality, health, safety, security, and environmental procedures and controls across the section to guarantee employee safety and delivery of high-quality products/services.Act as a role model and promote the concept of proactive safety and take personal responsibility to ensure that colleagues work without at-risk behaviours and conditions in order to positively contribute to the overall goal of zero incidents.Reporting:Provide transparency to management on progress of tenders and other strategic sourcing events.Prepare relative reports in a timely and accurate manner in order to meet the departmental requirements, policies, and standards.Requirements: Min 3 years into Oil & Gas, Petrochemical OR Commodities industry.Min 2 years into Procurement.SAP required.Any Bachelor's degree.

Responsibilities:Supervise the activities and work performed by direct reports to ensure that it is carried out in a safe and efficient manner, in line with the business plans, and company policies and procedures.Identify employees’ training and developmental needs and recommend plans to bridge the knowledge gaps to ensure continuous progression, and high-level of competence within the team.Recommend employees’ training and developmental needs and in conjunction with Human Capital Department bridge the knowledge gaps to ensure continuous progression, and high-level of competence within the team.Train and coach direct reports, ensure operators are trained and certified as required, and participate in evaluation of operators in OJT and Solo Phase to develop a team of cross trained operators.Manage the performance management process by setting annual objectives, and developing staff through mentoring, coaching and constructive feedback.Provide feedback in regard to baseload contractor performance.Ensure operators comply with all company policies, procedures, Standard Operating Procedures, and Daily Operating Instructions.Set the shift schedules and coordinate manpower to ensure adequate manpower allocation in the shift in order to ensure required task are safely completed (i.e., operator work area assignments, vacation approvals, overtime assignments, shift rotations, training coverage, coverage for shift vacancies, time approval, etc.).Requirements:Should have good knowledge in Warehousing.Should have hands-on experience in Packaging.Should be well versed with the Logistics activity.Education:Candidate should have minimum Bachelor of Science OR Engineering.

Responsibilities:Operational Excellence and Process Safety Participate in the PHA and MOC process by providing technical inputs and evaluating recommendations to ensure operational feasibility and compliance to safety standards.Investigate incidents, provide and evaluate recommendations from PHA to ensure timely implementation of the process. Process Optimization and Plant Performance EvaluationsImplement Advance Process Control System through proper awareness and specialization to optimize the process.Monitor the plant parameters daily and evaluate the plant performance by providing recommendations in order to improve technical processes.Manage material and energy balance, compare with design and assist the plant management in facilitating processes to run the plant efficiently and economically.Provide engineering assistance on technical aspects to the Operations Group, conduct evaluation and selection of equipment based on technical requirements to meet engineering standards.Policies, Systems, Processes and Procedures Contribute to the identification of opportunities for the continuous improvement of technical department’s systems, policies, processes and practices taking into account ‘international leading practices’ in order to improve productivity and operational efficiency.Provide critical input to support the development of Engineering systems, policies, processes, and procedures in order to meet business requirements.Ensure team members comply with all Engineering policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.Qatarization:Contribute to the development of Qatari employees.This accountability is applicable to expatriate. employees only. Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Section to guarantee employee safety and delivery of high-quality products/servicesRequirements:Required (Qualification1 / Discipline): Bachelor’s degree in chemical engineering.Preferred (Qualification1 / Discipline): Master Degree in Chemical Engineering. ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in Petrochemicals Industry in Process Engineering.Preferred (Years2 / Job Level3 / Industry): Experience in Oil & Gas Industry.

Responsibilities:Supervise the activities and work performed by direct reports to ensure that are carried out in an efficient and effective manner, in line with the annual business plans, and departmental policies and procedures.Recommend training and development interventions for team members to build their capabilities.Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.Monitor performance, identify upgrade needs, collect, analyze, and interpret performance data to ensure optimal control systems performance.Monitor and participate in control system installation, modification, and upgrades to ensure effective implementation.Work closely with Procurement team in the identification of upgrade requirements, technical qualification of vendors and final selection to ensure that services provided meet Q-Chem needs and standards.Modify the control systems throughout the plants, by installing all parameters, carrying out procedures as per set guidelines and practices to ensure smooth operations.Prepare spare parts management requirements at all times and monitor inventory, especially prior to major planned overhauls to avoid and minimize control system disruptions.Plan and schedule the upgradation of DCS & SIS equipment and systems and ensure alignment of all relevant stakeholders to maintain DCS & SIS systems reliability and optimal operation.Participate in developing of process and instrumentation diagrams to support clear and effective operation of control systems.Prepare DCS & SIS system specifications to ensure accurate standardization of material.Prepare cost estimates for respective projects, review and approve documentation developed by contractors to ensure effective selection of contractors that would meet Q-Chem needs within allocated budgets.Work closely with ICS cybersecurity team to ensure all DCS & SIS assets are secured.Participating of keeping DCS & SIS assets working within the target security level.Policies, Systems, Processes & ProceduresContribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes, and practices considering ‘international leading practices’ to improve productivity and operational efficiency.Provide critical input to support the development of Section’s systems, policies, processes, and procedures to meet business requirements.Ensure team members comply with all Section’s policies, processes, standard operating procedures, and instructions so that work is carried out in a controlled and consistent manner.Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high-quality products/services.Requirements:Required (Qualification1 / Discipline): Bachelor’s degree in Electrical Engineering, Electronic Engineering, Process Control Engineering, Instrumentation Engineering, Engineering Technology, Physical Engineering.Preferred (Qualification1 / Discipline): Master’s degree in Electrical Engineering, Electronic Engineering, Process Control Engineering, Software systems Engineering, or any related discipline.Experience:Required (Years2 / Job Level3 / Industry): 5 – 7 years of experience in control system function preferably in O&G Industry.Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals Industry or DCS/SIS systems OEM experiences. 2-3 years at a similar position as Emerson control system engineer for our client II, Honeywell control system engineer for our client or Yokogawa control system engineer for RLOC and Triconex safety systems.Preferred: Functional Safety Engineer..ISA Certified Automation Professional® (CAP®) Certification.ICS Cybersecurity Fundamentals. 

Responsibilities:Ensure production targets are met while maintaining compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, Daily Operating Instructions, Standard Operating Procedures (SOPs) and Job Safety Analyses (JSAs).Monitors process conditions and makes necessary adjustments in order to optimize the process while ensuring products are within the required specifications.Document critical activities and abnormalities via operator’s log.Perform comprehensive shift turnover.Timely completion of all compliance training.Ensure correct mitigations are in place for emergency & safety bypass permits.Issue Work Permits and authorize the unit entry.Responsible for housekeeping in work area. Advise support groups on housekeeping needs.Conduct detailed, quality rounds and complete e-SOMS tours in the plant, log all abnormalities and required follow up in the Narrative log. Report abnormalities to Shift Supervisor and take the necessary corrective actions.Participate in Safety and Reliability Improvement teams as required.Certify in the areas as decided by plant leadership and mentor for new employees.Take corrective actions to keep all the process parameters within its design limits.Work with and assist Technical and Maintenance to understand and solve the process problems.Prepare and commission equipment per DOI’s and Maintenance Schedule.Perform unit start-ups, normal operation, process upsets and shutdowns as per SOP and EOP requirements.If certified as Board Operator, work on DCS Board and communicate with upstream/downstream units on any process upset/problems.Follow and review SOP’s and EOP’s, give feedback Supervisor / Training Coach if SOP needs revisions or modifications.Work with Turnaround Planning to develop production plans and work packages. Support other operating units in TA as applicable.Unload CCA and collect process / product samples as required.Quality, Health, Security, Safety and Environment:Ensure compliance with Life Critical Procedures, Tenets of Operations, Consent to Operate, plant policies and procedures, Daily Operating Instructions, Standard Operating Procedures (SOPs), Job Safety Analyses (JSAs), MOC Process, and Quality Management System.Participate in the safety activities of the shift to ensure regulatory, health, safety, security, environmental, and quality compliance.Carry out plant walk-downs and audits to ensure work is being performed safely and that the plant safety systems are enabled. Coordinate efforts to correct discrepancies.Actively participates in shift toolbox meetings, JSAs, MSCM’s, etc.Execute Stop Work Authority and take immediate corrective actions to stop unsafe behaviors.Policies, Systems, Processes and Procedures:Contribute to the identification of opportunities for the continuous improvement of systems, processes and practices in order to increase productivity and operational efficiency.Implement all relevant Section’s policies, processes, procedures and instructions so that work is carried out in a controlled and consistent manner.Reporting:Prepare timely and accurate recaps and reports in order to meet departmental requirements, policies and standards.Communicate to Shift Supervisor to inform on issues that require additional follow up.Report incidents and near misses and participate in investigations as required.Qatarization:Contribute to the development of Qatari employees. This accountability is applicable to expatriate employees only.Requirements:Education:Required: High School Diploma with Tertiary Vocational DiplomaPreferred: 3-year Diploma or Bachelor’s degreeExperience:Required: 3-5 years of similar experience in the O&G IndustryPreferred: 3-5 years of similar experience in Petrochemicals Production Facility

Responsibilities:People ManagementAdvise and assist Maintenance l&E Engineers, electricians, instrument technicians and production supervisors on complex electrical and instrument repairs and troubleshooting methodologies.Support all the efforts towards building a harmonious work environment to promote the spirit of cooperation and team building within the l&E Reliability Section.Provide required technical support in matters requiring higher level of expertise and consultation. Instrument & Electrical Assets IntegrityDevelop and implement Reliability strategies by utilizing conventional techniques such as Reliability Centred Maintenance (RCM), Root Cause Analysis (RCA), Preventive and Predictive maintenance (PPM) strategies, and other industry accepted reliability techniques to analyse l&E equipment failures and produce cost effective strategies to ensure safe and reliable operation of the plant.Implement Mechanical Integrity & Quality Assurance best practices. Work with other concerned departments to develop & execute appropriate Quality Assurance (QA) practices and develop a mechanism to assess the effectiveness of QA practices.Proactively identify l&E Equipment Reliability Issues and develop engineering solutions for chronic and sporadic equipment reliability problems. Work with technical, production and maintenance to implement solutions.Lead Reliability Improvement efforts of the plant from the platform of Reliability Improvement Teams (RITs).Perform Root Cause Failure Analysis to identify various failure modes and recommend strategies to help improve l&E equipment reliability.Evaluate RCA reports, criticality studies, equipment strategies, and risk assessments on equipment to ensure consistency and compliance with company procedures and policies.Evaluate facility incidents that affect reliability and ensure that appropriate RCAs are performed.Assist in tracking RCA findings and completing action items in a timely manner .Develop Instrumented Protective Systems (IPS) related work processes in the company to comply with regulatory requirements mandated both by International Standards (IEC61511/ISA 84) and Company Standards RMS 5700.Administer the development of detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection drawings, loop drawings, Instrument data sheets etc.Prepare technical inquiry requests to vendors, participate in the technical evaluation of vendor bid offers.Review vendor drawings and documents and review design calculation. Ensure vendor equipment specifications meet the design specifications and are within budgeted costs.Reviews equipment specs/designs to ensure equipment can meet reliability objectives.Participate as a technical adviser on capital projects and turnarounds.Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications.Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required.Review and optimize ITPMs for functionally critical l&E equipment (MICE).Drive consistency in l&E equipment design across the site as part of projects review including consistency in maintenance strategies.Provide communication to area resources about improvement projects.Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects.Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets.Champion continuous improvement fosters relationships between various plant functions to focus on total quality. Policies, Systems, Processes and ProceduresContribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes and practices taking into account ‘international leading practices in order to improve productivity and operational efficiency.Provide critical input to support the development of l&E Reliability Section’s systems, policies, processes, and procedures in order to meet business requirements.Ensure team members comply with all l&E Reliability Section’s policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. ReportingPrepare relevant reports in a timely and accurate manner in order to meet the departmentalPrepare relevant reports in a timely and accurate manner in order to meet the departmental requirements, policies and standards.Support supervisor in the preparation of the annual operating and capital budgets. Ensures reliability projects and activities are completed on time and within budget.Communicate ideas, present, and explain technical knowledge to stakeholders.Communicate to Supervisor to inform on issues that require additional follow up.Report incidents and near misses and participate in investigations as required. Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high quality products/ services. Requirements:ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the fields of Electrical equipment & systems maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals IndustryOther Job Specific Requirements and/or Vocational AccreditationsWell conversant with protection and control systems of a large process plant involving High and Medium Voltages (132/33/6KV).Solid understanding of the concepts of electrical protection system design and intelligent protection relays operation.Experience in failure mode & effect analysis and good understanding of failure mechanisms of Electrical equipment.Troubleshooting techniques and ability to analyze and resolve engineering problems independently.Knowledge of relevant IEC and IEEE Standards and or other well recognized standards.Familiarity with ETAP and similar system modeling and analyzing tools would be an additional advantage.Relevant experience in having performed load flow & short circuit studies, Relay discrimination and coordination studies for an industrial electrical distribution system.Familiarity with CMMS preferably SAP.Sound understanding of industrial PLC and Packaged control systems. EducationRequired (Qualification1 / Discipline): ﻿Bachelor’s degree in electrical/ Electronics/Instrumentation Engineering. ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the field of Instrumentation &Controls maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational AccreditationsKnowledge of automation/control systems, including: DCS, PLC, Safety Instrumented Systems, function block and ladder logic programming, industrial instrumentation, electrical equipment and process analytical systems.Experience with design and maintenance of Plant Instrumentation, Control Valves, and Safety Instrumented Systems and process safety management programs.Functional Safety Certification as Functional Safety Engineer (FS Eng.) preferred.Hands on experience on the use of ExSILentia software preferred.Working Knowledge on International Standards related to Instrumentation and Controls design and maintenance such as IEC, ISA, FCI etc. as well as Functional Safety standards IEC61511/ISA 84.Experience in failure mode & effect analysis and good understanding of failure mechanisms of instruments employed in a process industry.Troubleshooting techniques and ability to analyse and resolve engineering problems independently. 

KEY RESPONSIBILITIES:Project EstimationAnalysing project specifications and requirements to identify all necessary cost components. Visit the site, review the project scope, drawings & specification to develop the cost estimate for the projects through different estimate classes as per the estimate guideline.Liaise with project engineer and other project stakeholders to convert specifications/quantities to cost estimates for projects.Assist to build the price schedule for contracting process.Review the engineering and construction service proposals and validate the proposals alignment with original project scope.Assist with bid analysis and contract negotiations whenever is applicable.Collaborating with vendors, suppliers, and subcontractors through commercial department to obtain quotes and pricing information.Collaborating with project engineers and projects stakeholders to develop and adjust budgets based on cost estimates. Estimate Control & Cost Analysis  Monitoring and updating cost estimates through all project phases and propose corrective actions if necessary.Analyse the cost of projects by comparing the original estimate and the actual cost through all project phases and provide a regular detailed variance report by cost elements.Control and monitor any of projects’ expenses and plan for unforeseen costs that may arise.Collect the cost details for completed projects, analyse the projects actual Vs estimate, compile the analysis for evaluation and create a lesson learned log sheet for all variations.REQUIREMENTS:Required (Qualification1 / Discipline): Bachelor’s Degree in Engineering (any discipline)Preferred (Qualification1 / Discipline): Bachelor’s Degree in Engineering (Mechanical/Civil)Experience Required (Years2 / Job Level3 / Industry): 5-7 years of experience as Estimation Engineer in the Petrochemical or Oil & Gas Industry. Must have 5-7 years of experience in brown field projects cost estimation.Preferred (Years2 / Job Level3 / Industry): 7+ years of experience as Estimation Engineer in the Petrochemicals Industry.Other Job Specific Requirements and/or Vocational AccreditationsHands on experience on costing tools/softwareCertificate of Cost Professional (CCP) is preferred3rd party certification (e.g., PMP, PMI, APM etc.)Advanced user of MS excels and other MS tools.

Skills

Industry

Location

Jobtitle

12 doha Jobs found

Instrument Technician

Fire and Gas Technician

Supervisor, Qatarization Development

Buyer

Shift Supervisor (Warehouse)

Process Engineer

Control System Engineer

Process Operator

Instrument & Electrical Reliability Engineer

Estimator

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

12 doha Jobs found

Instrument Technician

Fire and Gas Technician

Supervisor, Qatarization Development

Buyer

Shift Supervisor (Warehouse)

Process Engineer

Control System Engineer

Process Operator

Instrument & Electrical Reliability Engineer

Estimator

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.