Staff Engineer – Devices

Manufacturing Engineer(Molding)

Info Connector Assembly Process Engineer

Staff New Product Development Engineer

Mfg & Process DVL Engineer II (Automation)

Cable Assembly - Senior MPD Engineer 

Cable Assembly Manufacturing and Process Development Engineer

Manager, Manufacturing & Process Development for High-Speed Cable Assemblies

SR R&D - Product DVL Engineer

Manufacturing Engineering Molding Engineer

Responsibilities: Design &amp; Development: <ul><li>Lead the design and development of drug combination products by understanding design space and managing critical design parameters.</li><li>Utilize SolidWorks and apply design for manufacturing (DFM) principles along with geometric dimensioning and tolerancing (GD&amp;T) to create sound engineering drawings.</li><li>Identify the best tools and approaches to effectively solve engineering problems.</li><li>Develop, optimize, and analyze designs using a combination of engineering principles, analytical methods, and experimental techniques.</li></ul> Technical Support &amp; Compliance: <ul><li>Support the evaluation and assessment of new technologies, intellectual property, products, and processes.</li><li>Provide support for existing products in terms of quality, manufacturing, and cost improvement.</li><li>Execute technical and cross-functional project work to ensure successful product development.</li><li>Develop and implement detailed test methods and write comprehensive technical reports based on design verification testing for design changes and product design activities.</li><li>Collaborate effectively with laboratory technicians and support staff.</li><li>Ensure compliance with quality policies, standard operating procedures, and regulatory requirements.</li></ul> Requirements: Regulatory &amp; Validation Expertise: <ul><li>Knowledge of Factory Acceptance Testing (FAT), Process Validation, and Installation Qualification/Operational Qualification/Performance Qualification (IQ/OQ/PQ).</li><li>Understanding of U.S. regulatory and quality requirements, including 21 CFR 820.3</li></ul> Experience: <ul><li>Minimum 8 years of engineering experience, with a preference for at least 5 years in product development.</li><li>Strong understanding of disciplined product development processes and quality requirements.</li><li>Experience in statistical tools, computer analysis, and engineering fundamentals for problem-solving.</li><li>Proficiency in SolidWorks is required.</li></ul> Skills &amp; Competencies: <ul><li>Strong interpersonal skills with the ability to collaborate effectively.</li><li>Excellent technical judgment and problem-solving abilities.</li><li>Demonstrated accountability for the successful completion of assigned tasks.</li></ul>

Responsibilities: <ul><li>Participate in oversea transfer program and ensure molding machines, mold tooling’s and processes are installed and qualified promptly for production.</li><li>Initiate tooling, process and quality improvements to improve productivity.</li><li>Assist production and quality departments in analyse and troubleshooting to achieve good quality products.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Provide cost estimates for new of molding projects / tooling’s to the Project Management Team for project cost simulation.</li><li>Perform DFM (design for manufacturability) on new products, participate in the concept development of molds, automations and manual processes.</li><li>Standardize, improve tool design to achieve optimized lead-time, cost and safety requirement.</li><li>Carry out qualification tests on molds, machine and manual process</li><li>Ensure that all production machines, tooling and equipment which are being procured, installed and qualified promptly for production.</li><li>Investigate identify root causes and establish Corrective, Preventive Plan with effectiveness</li><li>Participate in Process FMEA and Design FMEA</li><li>Create and maintain mold drawings, standard work for the production.</li><li>Train and guide Mold Technicians in Mold maintenance and setup.</li><li>Participate in 6-Sigma projects, Kaizen events and other Improvement activities.</li><li>Perform any other duties which may be needed by the company related to engineering and production matters.&nbsp;</li><li>Assist production and quality departments in analyses and troubleshooting to achieving good quality products.</li><li>Initiate and implement programs such as continuous improvements, scrap reduction, cost reduction of raw material, cycle time reduction.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Perform DFM, provide concept development, cost estimates for new molding tools to the Project Management Team for project cost simulation.</li><li>Develop and optimize new product manufacturing process.</li><li>Follow company specifications and comply with environmental management system’s procedures.</li><li>Follow company WSH specifications and procedures and ensure that staffs comply.</li></ul> Requirements: <ul><li>Degree or Diploma in Mechanical / Production Engineering.</li><li>2-3 years relevant working experience in a Manufacturing environment.</li><li>Familiar with Pro-E (Creo), SolidWorks or AUTOCAD.</li><li>Good knowledge in design &amp; development of Injection molds.</li><li>Good knowledge in tool making, tool-steel application / selection and heat treatment process.</li><li>Familiar with Molding automation process.</li></ul>

Responsibilities: <ul><li>Work with manufacturing team to develop new manufacturing process for NPI project.</li><li>Main focus on new project process, fixture design and documentation initiate.</li><li>Evaluation and approve manufacturing process (process flow, fixture, equipment etc. before mass production started).</li><li>Monitor product line and identify opportunity for improvement.</li><li>Review the process change request from manufacturing.</li><li>Review product design and provide DFM inputs.</li><li>Follow new project schedule to ensure the manufacturing process readiness.</li></ul> Requirements: <ul><li>6+ years experiences in manufacturing industry, or relevant.</li><li>Hands-on knowledge and skills on process development including fixture design, PFMEA draft , automotive equipment design.</li><li>Prefer the candidate from auto industry.</li><li>Familiar with connector process and mechanical assembly for small unit.</li><li>Lean manufacturing expert is desirable.</li><li>Familiar with Infotainment connector manufacturing and application, relevant experience is preferred.</li><li>Be familiar with Design for Manufacture (DFM) principles, workflow, PFMEA and methodology.</li><li>Good leadership and reporting skills; ability to communicate well at all levels internally and externally.</li><li>Knowledge of production processes such as cutting, bending, stamping, plating, assembly.</li></ul>

Role Objective: <ul><li>Responsible for Power Solution product development, which is majorly used for data communication or Hyperscale computers.&nbsp;</li><li>Provide customer innovation solutions as well as manage the engineer documents following our clients system procedure.</li></ul> Responsibilities: <ul><li>Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications.</li><li>Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer.</li><li>Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Develop and manage product documentation, including product requirements, design documents, and test plans/reports.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all technical, quality, and cost objectives.</li><li>Work closely with suppliers to identify and qualify new components and technologies.</li><li>Conduct thorough design verification and validation testing to ensure the product meets the required specifications.</li><li>Collaborate with manufacturing teams to ensure a smooth transition to production.</li><li>Mentor and guide junior engineers and technicians to develop their skills and knowledge.</li><li>Conduct competitive analysis and market research to identify opportunities for innovation and differentiation.</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams.</li><li>Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers’ expectations.&nbsp;</li><li>Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification.&nbsp;</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our Global competency centers to enhance business revenue &amp; growth.&nbsp;</li><li>Apply engineering best practices to reduce cost and sustain existing products to meet customer’s cost targets.</li></ul> Requirements: Education/Knowledge: <ul><li>Bachelors or Masters degree in Mechanical or Electrical Engineering.</li><li>Strong understanding of mechanical and electrical engineering principles.</li><li>Experience with product development processes, including design, prototyping, and testing.</li><li>Strong problem-solving skills and ability to work independently or as part of a team.</li><li>Excellent written and verbal communication skills.</li><li>Experience with data center technology and connectors/cable assembly is a plus.</li><li>Project management skills and ability to manage multiple projects simultaneously.</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modeling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design, and Simulation</li><li>Knowledge of manufacturing process (machining, molding, stamping, plating, etc.)</li><li>Knowledge of material (metal/plastic) properties will be a plus.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li></ul> Critical Experience: <ul><li>Minimum of 10 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related.</li><li>This highly technical position requires an individual who can work independently.</li><li>Experience in product compliance certification ( Product, Safety, Environmental substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM).</li><li>Capability and experience in presentation on products, solutions, and technologies.</li><li>Previous experience in working in high-performing multi-disciplinary global engineering teams.</li></ul> Competencies: <ul><li>Technical capabilities: Expert functional/domain knowledge</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross-functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with the global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Building people capability: Training and mentoring engineers with the necessary skill set, assuring succession &amp; workforce planning &amp; organizational capability</li><li>Quality controller: Ability to assure quality for services, labels &amp; labs</li></ul> Motivational/Cultural Fit: <ul><li>Passion for technology</li><li>Talent development</li><li>Good communication skills and proactively communicate with team members and Customers</li><li>Effective planning &amp; Prioritization</li><li>Problem solving and Results driven</li></ul>

Responsibilities: <ul><li>Non-standard automatic equipment design and development, execute machine mechanism detail design and drawing, build, and execute automation design standard.</li><li>Handle machine or auto assembly line establish by external automation suppliers.</li><li>Platforming manufacturing process development.</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul> Requirements: <ul><li>Experience in automating machinery. Strong programming capabilities, expertise in machine design, and a solid understanding of all machine components, including mechanical, electrical, and programming aspects.&nbsp;</li><li>Hands-on experience working with these components and the ability to drive improvements and automation within the system.</li><li>Background in automating assembly machines, as well as experience with molding, stamping, and plating machines.</li><li>Familiar with these processes—assembly, plating, molding, and stamping. But overall, the key requirement is strong machine automation experience.</li><li>Background in machine design and a strong understanding of machine components, including electrical, mechanical, and programming capabilities.</li><li>Candidates should present detailed portfolios showing their involvement in designing complex machinery, including visual representations like jigs and machine designs.</li><li>Knowledge in PLC programming, Human machine interface. Know how to use 2D . 3Dsoftware</li><li>Familiar with key manufacturing and engineering documents such as PFMEA, DFMEA, DFM, and FAA, which are critical for this role.</li><li>Proficient in mechanical aspects, with the ability to work with 2D and 3D software such as Creo, Autodesk, and AutoCAD. These skills will be key in ensuring the candidate can contribute to both the design and automation processes effectively.</li></ul>

Responsibilities: Manufacturing Process Development: <ul><li>Define, review and confirm the entire manufacturing process from start to finish.</li><li>Coordinate Design for Manufacturing (DFM) review, and initiate Process Failure Modes and Effects Analysis (PFMEA) with core team members.</li><li>Prepare documentations and process specifications for production.</li><li>Lead team in identification, tracking and resolution of engineering issues using the Failure Analysis and Corrective Action (FACA) form.</li><li>Continuous manufacturing process improvement with company OA tools for cost reduction.</li></ul> Assembly Tool, Fixture and Equipment Development: <ul><li>Evaluate new tool, fixture, and equipment demand/cost for new projects.</li><li>Design and review the tool, fixture and equipment with core team members meeting company engineering and EHS requirement.&nbsp;</li><li>Upload all tooling prints to company data management system(DM.TEC, PDMLink, etc.)</li><li>Discuss and review details of tool/fixture/equipment with outside supplier.</li><li>Follow up the purchasing process to fabricate new tool/fixture/equipment.</li></ul> Qualification for Manufacturing process, Tool, Fixture, and Equipment: <ul><li>Condition all tool, fixture and equipment, lead the tool/fixture/equipment qualification by running samples or LVM.&nbsp;</li><li>Follow up the documentations for qualification, using company standard format and follow up the approval.</li><li>Coordinate pilot run for new products and solve engineering issues, make sure the manufacturing process capability meet engineering, quality and customer requirement.</li></ul> Technician Guidance: <ul><li>Coach, train and develop operator and technician in order to ensure their technique could be succeed and get continuous upgraded.</li></ul> Requirements: <ul><li>Bachelor degree or above. Mechanism engineering related background. </li><li>5 years’ working experiences in related field.</li><li>Good coordination and communication skill, accountability, integrity, customer focus.</li></ul>

Roles &amp; Responsibilities: <ul><li>Technical leader of process development for high-speed cable assembly products used in data center, AI, and supercomputing applications</li><li>Core responsibilities include Process Definition, Tooling Design/Cost Estimation, Process Qualification, and Exploration of Advanced Manufacturing.</li><li>Coordinate and/or Participate in the Design and DFM reviews</li><li>Initiate and document PFMEA, assessing and actively mitigating process risks</li><li>I lead and troubleshoot LVM process development, tooling, production, and issues and actions.</li><li>Launch project through FACA /QCPC at yield and rate.</li><li>Provide detailed process Definition and Requirements to the Automation Team for auto-machine development</li><li>Concept design for core assembly process and tooling, DOE Experiment Design</li><li>Challenge Product Design for Manufacturability and Cost Feasibility</li><li>Support process transfer and troubleshooting in global cable assembly manufacturing locations as needed</li></ul> Requirements: <ul><li>Bachelor or above degree and engineering background</li><li>5+ years. In High-Speed Cable Assembly process development, automation development, or Cable product design/development experience</li><li>Good teamwork and communication skills</li><li>Skillful in using Auto-cad and Pro/e</li><li>Knowledgeable of quality control and quality issue analysis and improvement.</li></ul>

Responsibilities: Lead a team of engineers who will: <ul><li>Develop cable assembly processes and production lines in accordance with LEANPD product development</li><li>Drive for excellence in existing high speed cable assembly lines</li><li>Strive to reduce line startup and eliminate defects.</li><li>Support Product Development in the optimization designs (DFM) and piece parts for high volume manufacturability; realizes proof of concept tooling, product samples and prototypes.</li><li>Design, develop, and qualify tooling and processes to meet our client Digital Data Networks quality and production standards.</li><li>Support supply chain to verify supplier compliance and capability.</li><li>Act as the binding element between product development and cable assembly engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Maintain communication with project management team to understand current and future strategic business needs</li><li>Prioritize and time manage a portfolio of projects/work efforts based on criticality and business need</li><li>Provide readouts to Director and VP level cross function management as necessary</li><li>Work with Hermosillo operations team to assign resources necessary for the successful execution of new high-speed cable production</li><li>Facilitate and coordinate cross-function communication across globally matrixed organization</li></ul> Requirements: <ul><li>Bachelor or above degree with mechanical/electric related majors;</li><li>At least 5 years related experience managerial level in multinational manufacturing site;</li><li>Familiar with Lean, Six Sigma. etc. industrial methods/tools;</li><li>With 2 years or above work experience in high-speed cable assembly production is required</li><li>Fluent in English and good presentation skills;</li><li>Familiar with MS software;</li><li>Familiar with industrial specification (i.e. IPC 620)</li></ul>

Role Description: <ul><li>For our product development team for electro-mechanical relays in the Centre of Competence in Waidhofen/Thaya in Austria, we are looking for a Senior Product Developer (m/f/d) to strengthen the team. </li><li>As a product developer, you will be responsible for supporting product management and sales with innovative product solutions. Our products are developed for the global market and have been on the market for many years (&gt;15 years). </li><li>As a Product Development Engineer, you will develop these products from the initial idea through to series production. The position reports directly to the Head of Product Development.</li></ul> Responsibilities: <ul><li>Main development engineer responsible for electro-mechanical relay platforms and platform extensions.</li><li>Independent development of innovative product solutions in compliance with the relevant standards.</li><li>Coordination of product requirements with field application engineers, product management and customers.</li><li>3D design and creation of 2D product drawings •	Carrying out feasibility studies and tests.</li><li>Management of Design for Manufacturing (DFM) and Design Failure Mode and Effects Analyses (DFMEA)</li><li>Collaboration with Ansys simulation experts and our in-house laboratory as well as prototyping.</li><li>Working in an international working environment.</li></ul> Requirements: <ul><li>Bachelors degree in mechatronics (an advantage), mechanical engineering, electrical engineering with professional experience.</li><li>Experience with the realisation of development projects.</li><li>Experience with project management is an advantage.</li><li>3D CAD design experience (preferably PTC Creo or similar parametric CAD programmes).</li><li>Creative and analytical mindset and problem-solving skills.</li><li>High level of innovation and ability to work in a team.</li><li>Good English Knowledge, German an advantage.</li><li>Main development engineer responsible for electromechanical relay platforms and platform extensions.</li><li>Independent development of innovative product solutions in compliance with the relevant standards.</li><li>Coordination of product requirements with field application engineers, product management and customers.</li><li>3D design and creation of 2D product drawings.</li><li>Carrying out feasibility studies and tests.</li><li>Management of Design for Manufacturing (DFM) and Design Failure Mode and Effects Analyses (DFMEA).</li><li>Collaboration with Ansys simulation experts and our in-house laboratory as well as prototyping.</li><li>Working in an international working environment.</li></ul> Location: <ul><li>Waidhofen/Thaya, Austria (remote location near the Czech Republic border).</li></ul>

Responsibilities: <ul><li>Responsible for Molding Process, Tool Design development, (New &amp; Old tools) Qualification and Trial</li><li>Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout</li><li>Participate and engage on product development, Tool Design, DFMEA / PFMEA</li><li>Work with Global COE Assembly to drive continuous improvement in Molding Technology / Process</li><li>Maintain proper documentation and for all Mold tooling, Spares, Mold and Process Set-up Sheets</li><li>Ensure all Tooling / Mold design drawings (Soft &amp; Hard Copy) are up to date.</li><li>Impart trainings and development for new joiners, Technical Trainees etc</li><li>Multi skilling among, Stamping tool design and Mould tool design&nbsp;</li><li>Coordinating with inter-department and assists with investigations of reject product and the development of corrective actions.</li><li>Drive company OA culture in shop floor.</li><li>Coordinate with Manufacturing Engineer for new product development and process improvement.</li><li>Assessing resource requirements and opportunity for Automation and Process Productivity improvement</li><li>Review of company OA deployment</li><li>Review ISO documents and update</li><li>Engage in ISO audits</li><li>Visit vendors for Assembly tooling assessment (Capability, Know How &amp; Capacity)</li></ul> Requirements: <ul><li>Bachelor in Mechanical Engineering major or Industrial Engineering</li><li>3-5+ years’ experience and practitioner in the Tooling Design &amp; Development</li><li>CAD Knowledge Must, preferably Pro E / Creo &amp; Auto-cad, Solidworks, NX, etc.</li><li>DFM analysis, New Mold / Tooling RFQ</li><li>Stamping Tool Debugging</li><li>Computer Knowledge, MS Office etc, SAP knowledge added advantage</li><li>Tool Room Process’s</li><li>Tooling Knowledge</li><li>Know How on core competencies (Stamping, Tool Design, Auto- Assy is an added advantage)</li></ul>

Skills

Industry

Location

Jobtitle

14 dfm Jobs found

Staff Engineer – Devices

Manufacturing Engineer(Molding)

Info Connector Assembly Process Engineer

Staff New Product Development Engineer

Mfg & Process DVL Engineer II (Automation)

Cable Assembly - Senior MPD Engineer

Cable Assembly Manufacturing and Process Development Engineer

Manager, Manufacturing & Process Development for High-Speed Cable Assemblies

SR R&D - Product DVL Engineer

Manufacturing Engineering Molding Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

14 dfm Jobs found

Staff Engineer – Devices

Manufacturing Engineer(Molding)

Info Connector Assembly Process Engineer

Staff New Product Development Engineer

Mfg & Process DVL Engineer II (Automation)

Cable Assembly - Senior MPD Engineer

Cable Assembly Manufacturing and Process Development Engineer

Manager, Manufacturing & Process Development for High-Speed Cable Assemblies

SR R&D - Product DVL Engineer

Manufacturing Engineering Molding Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.