Research Development Product Development Engineer II

Finance Manager (Manager I Controller)

R&D Engineering Manager II

Plant Controller

Account Manager II

Product Development Engineering (Mechanical)

Manufacturing Engineer - Injection Molding

Manufacturing Technician IV

Manufacturing Engineer

Procurement Manager

Responsibilities: <ul><li>Generate and maintain project documentation including schematics, drawings, test data, and reports</li><li>Design and develop electronic circuits while incorporating mechanical design</li><li>Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment</li><li>Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations.</li><li>Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities. Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers.</li><li>10% travel domestic/international (Passport will be required).</li></ul>&nbsp;Requirements: <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree 3-5 years of experience Experience circuit design, testing, and troubleshooting.</li><li>Experience in mechanical design Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors).</li><li>Knowledge of EMI/EMC is a plus.</li><li>Good communication verbal and written.</li><li>Experience in the use of Creo Wildfire software or similar CAD software Windchill PDM Link is a plus Knowledge of SAP is a plus Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred Knowledge of circuit analysis software such as TINA or SPICE Knowledge of ANSYS or similar analysis tools is a bonus Experience in Altium software or similar software is a bonus.</li><li>Proficient in MS Office Suite of Products Ability to read schematic diagrams Generate and maintain project documentation including schematics, drawings, test data, and reports Design and develop electronic circuits while incorporating mechanical design Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations. Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities.</li><li>Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers 10% travel domestic/international (Passport will be required) #TANAKR #LI-ONSITE.</li></ul>

Responsibilities: <ul><li>Responsible in leading monthly &amp; annual forecasting process.</li><li>Prepare accurate and timely financial reports to senior finance and operation management team</li><li>Provide cost quotation timely, responsible for standard costing accuracy, annual re-cost process and maintain costing system in SAP&nbsp;</li><li>Responsible for Month / Quarter / Year-end financial closing processes&nbsp;</li><li>Follow up company policies, procedures, SOX and internal control system development, enhancement and maintenance.&nbsp;</li><li>Provide support through financial analysis to assist operation team to identify cost saving opportunity</li><li>Collaborating with operation team to ensure plant strategic goals and financial targets are met</li><li>Business partner for Plant management</li></ul> Requirements: <ul><li>Bachelor’s degree or above in accounting, finance and economic field.</li><li>10+ years of experience finance and accounting, manufacturing company background would be a plus</li><li>Experience in budgeting/forecasting processes/cost structure, margin analysis, SAP experience would be a plus.</li><li>Proficiency in MS Office</li><li>Fluent in English both written and spoken&nbsp;</li><li>Teamwork, collaboration skills and high adaptability a dynamic and challenging environment.&nbsp;</li></ul>

Responsibilities: Undertake overall Responsibility:&nbsp; <ul><li>Manage in FA function and leading new technology to coordinating with engineering to develop core Tech and able to expand to lab levels for daily delegated tasks to manage the related database consolidation. </li><li>Driving with company A improvement on process or capability improvement to make lab goals achieved and support engineering to win in markets.&nbsp;</li></ul> Responsible for Strategy:&nbsp; <ul><li>Set clear FA direction goals and develop strategies with high-level visions that reframes what winning looks like and approaches to fulfil new technology assignments in creative and meaningful ways.</li><li>Providing strategy for FA/Lab directions align with organization value drivers and tactics to key program execution with excellence and flexible.&nbsp;</li><li>Such as Identify FA team with right size, people skills and address technical assistance to design feasibility and make recommendations for necessary changes.</li><li>Transform stakeholders need and assess FA/Lab capability tried-and-true options for scenarios allocate resources to high priorities (people, cost $, management attention, sustainability etc) to significantly shorten the product design cycle and help bring products to market faster while ensuring high quality and performance.&nbsp;</li><li>also sorts of possibilities to creating an optimal flow to shaping up team to be more engaging and easier to follow.</li><li>With financial knowledges to assess capability and predict organization forecast and analysis per budget scope, and build long-term constructive common ground network across the adjacent functions such as Product Engineering, Project Engineering and Field Application Engineering etc.&nbsp;</li><li>Align organization culture targeting and systematically pursuing specific areas for further secure lab competitiveness, i.e. (Software/ System/CoE/ 3DP/New Tech etc)&nbsp;</li></ul> Responsible for lab strategy mobilization and execution: <ul><li>Communicate and distribute the requirements per lab programs implementation keeps FA/Lab ahead of or at pace with the competition,</li><li>Boost and Outline the necessary investment plan of amount, relevance, and quality of test equipment in FA/lab, driving efficiency to maximize value and return on investment.</li><li>Create and use systems for monitoring and manage various performance in FA function OKR/KPIs to process control and follow up and streamline the process and balance of stability and agility that maximizes the speed and effectiveness by using digital data-driven techniques, show diagram visually.</li><li>Broad knowledge to develop FA/Test/3DP etc method per core technology to foster FA/lab growing, and design new correction/prevention quality initiatives to pinpoint the risks and minimize lab operation obstacles, build resilience ahead of any potential crises and update risk assessments so that enable lab able to mitigate the impact and unlock opportunities.</li><li>Define FA/Lab operation mechanism, criteria, and management discipline to ensure FA/Lab for daily work what is in good working order.&nbsp;</li><li>Leading Team use data to make timely decisions.&nbsp;</li><li>Research new development method and set guidelines enables engineering/manufacturers to better process control and maintain quality within acceptable limits to prevent failure in early stage, approaching smart tech to accelerate the testing, inspection, and analysis activities,&nbsp;</li></ul> Succession Talent Effectiveness: <ul><li>Identify key talents per OLR and drive team and equip team development goals to ensure most value-creating roles in lab filled with right position.</li><li>Capable with management skills to prepare effective office support in place, such as Give Training and properly communicate findings so as to help team to continuously improving their abilities to ensure lab organization successfully and sustainable as whole team can do or to achieving next level.</li></ul> Requirements: <ul><li>Master degree or above level of qualification in Engineering technology areas</li><li>Minimum 8+years of similar industry Engineering field and for management, English listening, speaking, writing ability are required</li><li>Experience in technical technology on validation test, Failure Analysis, or 3D printing, tool application or system Engineering preferred</li><li>Proactive oriented and tenacity to results driven</li><li>Practioner well on logic and structure skills</li><li>Manager level experiences with ISO/IEC 17025 lab system standards and engineering skills</li><li>Demonstrated ability in conducting audits and all aspects of communication, collaboration and team building skills.</li><li>Proficient ability in developed the new tech to reduce redundant testing or inspection activities , or experience for new program/project boosting and launch preferred</li><li>Outstanding engineering background and Test field for know organization management and with software capabilities would prefer</li></ul>

Responsibilities: <ul><li>Partner with Plant operations to drive plant financial achievement, collaborate with functional teams to drive process improvements to achieve operational efficiencies and productivity</li><li>Perform in plant MOR review, provide recommendations for corrective actions and opportunities for improvement to operation functions</li><li>Responsible for month/quarter/year-end financial closing process, prepare accurate and timely financial reports including variance analysis and explanations to regional Ops Finance</li><li>and Plant GM&nbsp;&nbsp;</li><li>Aim to identify and highlight business risks timely and coordinate with Ops function to mitigate effectively</li><li>In still strong internal controls and ensure that the plant operates with full compliance, focus on internal control enhancement</li><li>Support the business in key contract and agreement reviews, work with respective stakeholders to protect company best interest&nbsp;</li><li>Ad hoc support on project basis, provide financial support on business cases</li></ul> Requirements: <ul><li>Bachelor’s degree in accounting or financial management</li><li>10+ years’ experience in operations ﬁnance accounting with a minimum of 3 years of management experience</li><li>Experience in budgeting/forecasting processes/cost structure, SAP experience would be a plus</li><li>Account recognition and ﬁnancial controls experience</li><li>Fluent in English both written and spoken</li><li>Analytical thinking, details oriented and problem-solving orientation</li><li>Teamwork, collaboration skills and high adaptability a dynamic and challenging environment</li></ul>

Responsibilities: Sales Activities: <ul><li>Propose and implement annual sales plan (TERP target, billing target, market share, product portfolio expansion, new project etc.) on the dedicated key accounts; conduct analysis to identify customer needs and content per car increase</li><li>Promote products to customers based on their enquiries and requirements to earn sales orders; convince customers to accept contract trade terms, pricing and obtain change approval from Key Account Manager and Sales manager in order to achieve billing targets and increase market share.</li><li>Create and maintain relationship with existing customers; coordinate communications between customer and internal departments in order to maintain customer satisfaction and develop new sales.</li><li>Take care of the offer and negotiation with customer.</li><li>Reach the defined project target (quality, capacity, timing, cost).</li><li>Solve problems and work on profit improvement, handle technical changes.</li></ul> Marketing Activities: <ul><li>Maintain general market awareness; gather customers and competitor information; learn and study market trends; and prepare reports in order to increase market share and develop expansion plan.</li><li>Coordinate with Marcom to organize marketing events and send catalogues and promotion materials to customers in order to promote TE Auto products and corporate branding.</li><li>Customer Relationship Development and Maintenance. Create and maintain relationship with existing and new customers; coordinate communications between customer and internal departments in order to maintain customer satisfaction and develop new sales.</li></ul> Requirements: <ul><li>Bachelor in Engineering.</li><li>3+ years sales experience in auto industry, position in account manager or CQE or FAE or PM or Product engineer.</li><li>Good command of English.</li><li>Communication and influencing skills, integrity, sense of responsibility, proactive, learning capabilities.</li><li>Ability to handle multiple tasks and work under pressure.</li></ul>

Responsibilities: <ul><li>Designing and developing new products to meet customer requirements within scope, schedule, and budget constraints by following company LeanPD process.</li><li>Innovating original ideas and design proposal for new products, studying the feasibility of customer specifications.</li><li>Leading new product technical data output, such as: 3D, 2D drawing and Design objective.&nbsp;</li><li>Initiating product design document, such as: PRD, DV/PV plan, Product review, Initial BOM, DFMEA and Significant Characteristic.&nbsp;</li><li>Leading product design review with function team and technical review with customer, and communicating with supplier feasibility study of components material.&nbsp;</li><li>Performing engineering calculations to analyze and describe product to ensure robust design with economic cost.</li><li>Working with FAI approvals, technical risk analysis, supporting 8D report and 5 WHY analysis, judging manufacturing deviations and making decisions on deviation acceptance.</li><li>Improving and enlarging existing products, quality improve and manufacture engineering support. Helping resolve technical problems or providing solutions of avoiding problems to ensure accurate implementation of production.</li><li>Understanding product testing procedures and equipment, reviewing evaluation or test report and confirming accuracy of report contents to ensure product meets quality specification.</li><li>Reviewing patent searches to evaluate patentability of proposed designs to ensure that others patents are not infringed upon.&nbsp;&nbsp;</li><li>Providing innovative solutions to reduce product cost, improving product quality, and improving process efficiency, documents and communicates potential IP to ensure TEs IP is protected.</li><li>Providing technical support to customers and Sales Engineers to ensure proper application of products in the field.</li></ul> Requirements: Education:&nbsp; <ul><li>B.S. of Engineering or Master or PHD, Mechanical Engineering preferred.</li></ul> Qualification &amp; Certification: <ul><li>Ability to perform complicated product development.</li><li>Be familiar with the customers requirements and transforms them into design objectives through communication with the customer.&nbsp;&nbsp;</li><li>Be familiar with related automotive standards such as USCAR, SAE,LV15, etc.</li><li>English good.</li></ul> Experience: <ul><li>B.S. of Engineering with 5 or more years of experience or Masters of Science with 2 or years of experience or PHD</li><li>More than 2 years HV Connector Design related experience.</li></ul> Technical Skill &amp; Competencies: <ul><li>Be familiar with product development process and related product manufacturing process.</li><li>Understanding of special characteristic significance for customer and TE</li><li>Understanding of basic automotive industry core tools, such as APQP, FMEA and PPAP.</li><li>A complete understanding and wide application of technical theories, principles, engineering tools and techniques, such as: GD&amp;T, DFM, DFA, DFSS, etc.</li><li>Ability to skillful use Cero software and drawing design, tolerance calculation.</li><li>Familiar with stamping, plating, molding, assembly and machine Application process.</li><li>Understanding of relevant technical standards and law regulations.</li><li>Ability to build strong internal/external working relationship.</li><li>Effective Interacts and communication within the team.</li></ul>

Responsibilities: <ul><li>Provide feedback to Product Engineering where design issues exist that limit quality, reliability, or keep cost targets from being met.</li><li>Work to develop, improve, and implement safety controls in manufacturing</li><li>Support business unit initiatives for cost out, materials, and process productivity</li><li>Ability to proactively drive projects with minimal guidance or supervision</li><li>Responsible for all aspects of tooling and process development: concept, quoting, purchasing, design reviews, build, conditioning, validation, approval, and production release</li><li>Design and complete capability studies/process and tooling validations to ensure capable processes.&nbsp;</li><li>Familiarity with measurement system analysis tools is preferred.&nbsp;</li><li>Work with the New Product Design team on new programs, ensuring design for manufacturability and design for automation opportunities</li><li>Ensure product, tooling, and process documentation meet all our client Quality and Engineering system requirements</li><li>Evaluate and recommend changes to existing mold tooling and tooling design to ensure that manufacturing capabilities meet the maximum capacity and cost objectives for the business unit</li><li>Initiate and review design and mold constructions and significant modifications.</li><li>Implement a controlled process to collaborate with Product Engineering on pending design changes.</li><li>Work with the Global Molding Center Of Excellence and ensure deployment across the Business Unit.</li><li>Participate in management meetings to identify standard process approaches and to identify key technology needs to reduce costs or capture new markets.&nbsp;</li><li>Responsibilities are subject to change based on Manufacturing needs.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Engineering.</li><li>3-5 years of Engineering/Technical experience in a manufacturing environment.</li><li>Must have knowledge of molding process theory, engineering grade resins, and auxiliary equipment.</li><li>Capable of taking molding projects from concept through approval.</li><li>RJG Methodology a Plus.</li><li>Understanding of core processes (i.e., molding, stamping, plating, assembly)</li><li>Proven and practical problem-solving skills and attention to detail.</li><li>Self-directed and highly motivated</li><li>Excellent written, verbal, and presentation skills; Confidence and ability to effectively communicate</li><li>Must be willing and able to travel both domestically and globally as required (Travel &lt;10%)</li><li>Must be willing to participate in teleconference meetings to accommodate other time zones</li><li>Able to evaluate product function and be able to make material recommendations to product engineering</li><li>Working knowledge of LEAN and Six Sigma principles is a plus.</li><li>Strong computer skills (CREO, CAD, project management, word processing, spreadsheets)&nbsp;</li><li>Must be proficient in the English language</li></ul> What your background should look like: <ul><li>Must be willing to participate in teleconference meetings to accommodate other time zones</li><li>Able to evaluate product function and be able to make material recommendations to product engineering</li><li>Working knowledge of LEAN and Six Sigma principles is a plus.</li><li>Strong computer skills (CREO, CAD, project management, word processing, spreadsheets)&nbsp;</li><li>Must be proficient in the English language</li></ul> Competencies: <ul><li>Values: Integrity, Accountability, Inclusion, Innovation, Teamwork</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment.</li><li>Troubleshoot equipment failures and repair as needed.</li><li>Perform specified preventative maintenance on production equipment to prevent equipment down-time.</li><li>Perform Lock Out / Tag Out requirements.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li><li>Analyze and improve existing products, equipment, processes as assigned.</li><li>Develop manufacturing methods and processes in the production of components and methods to reduce manufacturing costs.</li><li>Investigate, establish and implement requirements for equipment, tooling, and methods of manufacturing.</li><li>Participate in cost reduction and cost of quality programs.</li><li>Assist manufacturing engineer in solving production constraints.</li><li>Support production through independent review, root cause analysis, corrective action, discrepancy handling, and defect prevention.</li></ul> Requirements: <ul><li>Good communication skills, both oral and written.</li><li>Ability to work independently.</li><li>Working knowledge of Microsoft Windows.</li><li>Must have good or corrected eyesight to ensure quality of work.</li><li>Strong practical technical ability.</li><li>Good mechanical aptitude and troubleshooting ability.</li><li>Ability to work in a fast-paced environment.</li><li>Associate Diploma in a technical discipline or equivalent experience.</li><li>1+ years experience in injection molding maintenance, or mechanical, hydraulic, pneumatic and electrical repair.</li></ul>

Responsibilities: <ul><li>Supplier Engineering Capability</li><li>Support Sourcing for new supplier qualification</li><li>Support Sourcing for supplier exit</li><li>Support SQE for supplier audit</li><li>Supplier assessment, to improve supplier capability</li></ul> New Project <ul><li>Support Sourcing for new product 安定quotation</li><li>As project leader (for Micro Lite project), to manage new project for on schedule approval</li><li>As manufacturing engineer, to support supplier for DFM and PFMEA etc. preparation and design review etc.</li><li>As manufacturing engineer, to support supplier for process and tool design and qualification</li><li>Follow up sample making issues and sample schedule which requested by customer or PDE. and work with cross function team members and supplier for improvement until approval</li><li>Work with PBL suppliers for packing design and qualification test</li><li>Work with supplier to get all engineering documents done</li><li>Work with SQE and supplier for safe launch process audit</li></ul> Sustain Product <ul><li>Work with Sourcing and supplier to review and improve capacity, including/lead copied tool qualification</li><li>Work with SQE and supplier to improve process yield and any quality problems</li><li>Follow EC change and 4M change</li><li>Follow material change (alternative), to work with team members to lead new material qualification progress</li><li>Follow supplier change or migration project (from company plant to PBL supplier), to work with cross function team members and supplier to follow qualification</li></ul> Productivity <ul><li>Work with suppliers and team members to find the improvement opportunities, such as process, material, plating, packing etc.</li><li>Follow VAVE project, work with supplier and team members to drive the project and cost reduction</li><li>Support Sourcing for cost reduction nego</li></ul> Capex Management and Equipment Maintenance <ul><li>Follow capex qualification, and work with Finance and Sourcing and PBL supplier to manage those capex well</li><li>Support PBL supplier to prepare equipment and tool maintenance plan and monitor the plan conducted well by supplier</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree and mechanical related background</li><li>Total Working experience 8 years above</li><li>Over 5 years Connector and / or Cable manufacturing engineering experiences</li></ul>

Responsibilities :&nbsp;<ul><li>Pressure-test and approve all regional strategies for the category.</li><li>Monitor strategy implementation, measure and track internal performance (KPIs) within each spend category.</li><li>Drive annual productivity improvements in each spend category.</li><li>Develop expertise in spend categories.</li><li>Serve as an escalation point for cross-functional issues.</li><li>Work with regional strategic sourcing managers to develop long-term strategies for their groups of categories.</li><li>Responsible for delivery of budget and financial targets</li><li>Direct the sustainability and responsible sourcing strategy for indirect spend.</li><li>Activating CAPA process together with Quality and follow up the non-conformity resolution with suppliers.</li><li>Comply with the process flow for Supplier Verification Prerequisite program, effectively support the initial approval and annual evaluation processes.</li><li>Meet the requirements of the approved supplier program for chemicals PRP program and to ensure the completion of quality &amp; ISG approvals for new chemicals.</li><li>Manage contract and approval processes with suppliers for the Waste Management program.</li><li>Ensuring compliance with legal requirements. </li><li>Ensure R&amp;D and Quality required changes are communicated and implemented with relevant suppliers.</li><li>Supporting actions that will affect QFS parameters and ensuring that the actions are carried out on time.</li><li>Ensuring team prioritizes and monitors actions on urgent matters due to OHS and QFS requirements and ensuring that this culture is transferred to the team.</li><li>Work with KWS Lead for cost optimization projects and be a member at LDS COE, QFS COE.</li><li>Attract, develop and retain talent.</li></ul>&nbsp;Requirements: &nbsp;<ul><li>University graduate with minimum 7 years track record within Procurement, with min 2 years people management experience</li><li>Advanced sourcing toolkit and proven supply base management</li><li>Strong analytical skills</li><li>Strong negotiating skills</li><li>World class supplier relationship skills</li><li>Visionary leader and critical thinker</li><li>Strong people leadership</li><li>Strong relationship building skills</li><li>High level English knowledge (reading, writing, speaking)</li><li>Excellent communication skills (written and verbal)</li><li>Knowledge in SAP is preferable</li></ul>

Skills

Industry

Location

Jobtitle

54 cost Jobs found

Research Development Product Development Engineer II

Finance Manager (Manager I Controller)

R&D Engineering Manager II

Plant Controller

Account Manager II

Product Development Engineering (Mechanical)

Manufacturing Engineer - Injection Molding

Manufacturing Technician IV

Manufacturing Engineer

Procurement Manager

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

54 cost Jobs found

Research Development Product Development Engineer II

Finance Manager (Manager I Controller)

R&D Engineering Manager II

Plant Controller

Account Manager II

Product Development Engineering (Mechanical)

Manufacturing Engineer - Injection Molding

Manufacturing Technician IV

Manufacturing Engineer

Procurement Manager

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.