Sr MFG & Process DVL Engineer - Automation Mechanical

Operations Manager

Manufacturing Engineer

Research & Development Product Development Engineer II

125112 Vision System Engineer

Cost Modelling Analyst

Principal Signal Integrity Engineer

Fiber Optic Product Development Engineer

125112 Assembly Vision System Engineer

127202 / 127203 Customer Quality Engineer

Responsibilities: Equipment design and debugging reception <ul><li>Work with vendors to set up/debug automation machine; Timely feedback and solve the problem to ensure the progress of the project</li></ul> Technical support <ul><li>Provide technical support to manufacturing during pilot run and production start-up/change over</li></ul> Problem solving <ul><li>Problem identification and trouble-shooting a wide range of complex mechanical problems for automation line</li><li>Responsible for the effective communication across the company</li></ul> Training guidance <ul><li>Instruct technicians and participate in automatic line maintenance and product changeover work</li><li>Line maintenance/change over together with/guiding the technicians to make sure automation machine run smoothly</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree, major in mechanical engineering/automation/mechatronics, the academic requirements can be relaxed for outstanding candidates</li><li>Minimum 5 years of experience w/ automated assembly machines, skilled in fixture/jig design and trouble-shooting for automation machine;</li><li>Familiar with Vision Inspection (Keyence/Cognex), Programmable Logic Controllers (PLC), Pneumatics, sensors, motors and other motion control devices and components selection;</li><li>Robot knowledge will be a plus;</li><li>Interfacing knowledge between mechanical and electrical;</li><li>Familiar with Pro-E or SolidWorks, AutoCAD software to create 2D and 3D drawing;</li><li>Proven strong analytical and problem solving skills, good interpersonal skills.</li><li>English skills, able to ready technical materials in English.</li></ul>

Responsibilities: Policies and Procedures <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy.</li></ul> People Management and Development <ul><li>Allocate and balance work across direct reports; authorize subordinate to perform tasks in order to enhance their capabilities;</li><li>Review and provide timely performance feedback to direct reports;</li><li>Mentor subordinates in daily work, provide technical and non-technical training;</li><li>Develop succession plan and employee development plan and monitor the execution;</li><li>Prepare manpower plan and application, conduct candidate interview and give opinion;</li><li>Conduct regular staff meeting on management skills improvement;</li><li>Resolve people/functional issues in the team in order to achieve targeted department performance and retain key talent.</li></ul> Production Capacity Plan <ul><li>Develop production capacity plan base on business forecast in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Manufacturing Management <ul><li>Manage Assembly , Molding, Stamping Operations along with EHS, Facility, Tooling maintenance and execute production plan ; Closely collaborate with quality, project engineering, Materials, ME, and solve operational issues, and update the key issues with ASEAN Operations Manager in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Key Engineering Capability Development <ul><li>Involve and support (including allocate resource and provide advice) key Engineering capability development in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Production Quality System and EHS <ul><li>Maintain production quality system in order to improve manufacturing efficiency and achieve operation excellence.</li><li>Monitor the implementation of company EHS policy in production process in order to improve manufacturing efficiency and achieve operation excellence.</li></ul> Requirements: <ul><li>Bachelor degree in Engineering.</li><li>12- 15 years manufacturing experience including 8 years general operational management experience.</li></ul>

Responsibilities: <ul><li>Supplier Engineering Capability</li><li>Support Sourcing for new supplier qualification</li><li>Support Sourcing for supplier exit</li><li>Support SQE for supplier audit</li><li>Supplier assessment, to improve supplier capability</li></ul> New Project <ul><li>Support Sourcing for new product 安定quotation</li><li>As project leader (for Micro Lite project), to manage new project for on schedule approval</li><li>As manufacturing engineer, to support supplier for DFM and PFMEA etc. preparation and design review etc.</li><li>As manufacturing engineer, to support supplier for process and tool design and qualification</li><li>Follow up sample making issues and sample schedule which requested by customer or PDE. and work with cross function team members and supplier for improvement until approval</li><li>Work with PBL suppliers for packing design and qualification test</li><li>Work with supplier to get all engineering documents done</li><li>Work with SQE and supplier for safe launch process audit</li></ul> Sustain Product <ul><li>Work with Sourcing and supplier to review and improve capacity, including/lead copied tool qualification</li><li>Work with SQE and supplier to improve process yield and any quality problems</li><li>Follow EC change and 4M change</li><li>Follow material change (alternative), to work with team members to lead new material qualification progress</li><li>Follow supplier change or migration project (from company plant to PBL supplier), to work with cross function team members and supplier to follow qualification</li></ul> Productivity <ul><li>Work with suppliers and team members to find the improvement opportunities, such as process, material, plating, packing etc.</li><li>Follow VAVE project, work with supplier and team members to drive the project and cost reduction</li><li>Support Sourcing for cost reduction nego</li></ul> Capex Management and Equipment Maintenance <ul><li>Follow capex qualification, and work with Finance and Sourcing and PBL supplier to manage those capex well</li><li>Support PBL supplier to prepare equipment and tool maintenance plan and monitor the plan conducted well by supplier</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree and mechanical related background</li><li>Total Working experience 8 years above</li><li>Over 5 years Connector and / or Cable manufacturing engineering experiences</li></ul>

Responsibilities: <ul><li>The R&amp;D/Product Development Engineering is responsible for the design, development of product line extensions of legacy product, with a focus on sustaining engineering of contactors/relays, power distribution panels and related products for applications in aerospace electrical power distribution and management systems.&nbsp;</li><li>The ideal candidate should be able to work independently and within a team-based environment. Determine product requirements based on internal/external product design specifications and Voice of the Customer inputs. Plan and record results of design, development, and sustaining activities, including validation testing.&nbsp;</li><li>Design to cost target while meeting financial and performance expectations.&nbsp;</li><li>Manage Bill of Materials for products. Facilitate cost reduction activities on new and existing products. Perform calculations, analysis, and testing to ensure that a product meets specifications. Participate in and/or lead Design and Process failure mode and effects analysis.&nbsp;</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers, and external customers.&nbsp;</li><li>Initiate and manage engineering change activities. Apply electrical, electronic, and mechanical principles to components, including assembly, analysis, and documentation of results.&nbsp;</li><li>Supports, participates, and leads design, test, modification, fabrication, and assembly of prototype devices.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree</li><li>3-5 years of experience</li><li>Experience circuit design, testing, and troubleshooting</li><li>Experience in mechanical design</li><li>Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors)</li><li>Knowledge of EMI/EMC is a plus</li><li>Good communication verbal and written</li><li>Experience in the use of Creo Wildfire software or similar CAD software</li><li>Windchill PDMLink is a plus</li><li>Knowledge of SAP is a plus</li><li>Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred</li><li>Knowledge of circuit analysis software such as TINA or SPICE</li><li>Knowledge of ANSYS or similar analysis tools is a bonus</li><li>Experience in Altium software or similar software is a bonus</li><li>Proficient in MS Office Suite of Products</li><li>Ability to read schematic diagrams</li></ul>

Responsibilities: Quality Documents Preparation and Revise. DQIP, Workmanship, Control Plan: <ul><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li></ul> Setup &amp;F AAR: <ul><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li></ul> MSA (GRR),gage: <ul><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li></ul> PFMEA: <ul><li>Assure the process risk control basing on efficient PFMEA.</li></ul> NCR &amp; QA instruction : <ul><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D CHS</li><li>8D report prepare and CHS system handling</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results</li></ul> Training: <ul><li>Providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education,Technical Qualification &amp; Experience: <ul><li>Bachelor degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>MSA, SPC, FACA</li><li>Familiar with quality management tools, such as MSA, SPC, FACA etc</li></ul> Personal Attributes &amp; Competencies: <ul><li>Integrity; Accountability; Communication; Outgoing.</li><li>Good capability of logical thinking, self-study and independent problem solving</li></ul>

Responsibilities: <ul><li>Lead and manage multiple cost estimation projects simultaneously</li><li>Develop and contribute to global company cost standards by region for responsible commodity&nbsp;</li><li>Analyze part data to identify and prioritize future projects and opportunities</li><li>Benchmark internal, competitor and supplier parts to identify gaps and/or technology advancements for responsible commodity</li><li>Develop cost estimations (should-cost or clean sheet) and identify, summarize and present cost gaps to key stakeholders</li><li>Analyze manufacturing overhead including cycle times, components, assembly, inspection etc.</li><li>Collaborate across teams and build rapport to implement identified opportunities into savings</li><li>Supports the design and development of proposed process changes</li></ul> Requirements: <ul><li>BA/BS Degree required (extensive experience will be considered). Business, Engineering, or Supply Chain preferred.</li><li>Minimum 2 years of experience within Supply Chain</li></ul>

Responsibilities: <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles</li><li>Establishing signal integrity design performance/functional requirements for new products</li><li>Performing signal integrity simulations for multiple high-speed standards on each product.&nbsp;</li><li>This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.</li><li>Performing PCB design schematic and layout reviews</li><li>Creating actionable recommendations based upon design reviews and simulation results</li><li>Guiding connector design and component qualifications from a signal integrity standpoint.&nbsp;</li><li>Making data driven decisions about the product functionality and areas for improvement.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering; Masters Degree preferred</li><li>Minimum of 10 years of relevant work experience in electrical Design, RF design or PCB design</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior&nbsp;</li><li>Expert with Signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools)</li><li>Expert with 3D CAD tools (SpaceClaim preferred, AutoCAD, Creo, or equivalent)</li><li>Expert with high-speed test equipment (VNA, TDR, BERT)</li><li>Expert with interconnect design or electronic packaging, with a preferred focus on high-speed differential connectors and/or cable assemblies, RF connectors, and channel integration.</li><li>Expert with printed circuit board layout and design (Altium preferred), fabrication and assembly, especially as associated with connector FP and card-edge interfaces</li><li>Proficient with data analysis techniques, appreciation for design geometry tolerance impacts, and HVM qualification.</li><li>Experience with physical layer communications systems and architectures.</li><li>Fluent in English (both verbal and written)&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Expert in analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.</li><li>Learning Capability: Open minded, coachable, willing to learn new skills, and motivated to grow</li><li>Pro-active in identifying complex situations, providing solutions, and driving improvements to evolving procedures</li><li>Experience writing technical papers and presenting to BU-level organizations, external conferences, and critical customer contacts</li><li>Proficient at owning project SI responsibilities and driving team actions across multi-discipline engineering &amp; manufacturing teams</li></ul>

Responsibilities : <ul><li>Product design, including but not limited to, fibre optic connector and termini design, fibre optic cable assembly design, fibre optic flex cable assembly design.&nbsp;</li><li>Support development of fibre optic interconnect systems&nbsp;&nbsp;</li><li>Liaison to Manufacturing plant locations&nbsp;</li><li>Create Engineering Change Requests (ECRs)&nbsp;&nbsp;</li><li>Make changes to drawings in SolidWorks/CREO/ZWCAD to support UK MIL or General Market Controlled ECR/ECNs&nbsp;</li><li>Address requests for product extensions, drawing changes, engineering quotes.&nbsp;</li><li>Handle requests to get part extended and costed SAP&nbsp;&nbsp;</li><li>Support Expanded Bean Product Line for changes and product extensions.&nbsp;</li><li>Create design verification test (DVT)/Qual test plans, create test request&nbsp;&nbsp;</li><li>Support/witness testing in the lab,&nbsp;</li><li>DVT/Qual cable assy design/drawings, component modeling/print creation,&nbsp;</li><li>Participate in DFMEA/PFMEA&nbsp;&nbsp;</li><li>Support design review preparation/presentation&nbsp;&nbsp;</li><li>Model shop requests&nbsp;</li><li>Support build or build prototype parts.&nbsp;&nbsp;</li><li>Working knowledge of manufacturing processes.&nbsp;</li><li>Proficient with MS Office software.</li></ul> Requirements : <ul><li>Fiber optic or rugged fiber optic connector and termini development background</li><li>Degree in appropriate discipline or equivalent work experience with fiber optic connectors, cables, termini, etc&nbsp;</li><li>Fiber optic cable assembly development experience&nbsp;</li><li>Support and lead product development through the product development life cycle&nbsp;</li><li>Experience with Solid works, CREO and Autocad&nbsp;&nbsp;</li><li>Tolerance analysis&nbsp;&nbsp;</li><li>5-8 years design and new product development experience, preferably with electronic or optoelectronic related assemblies, hardware, and components</li></ul>

Responsibilities: Quality Documents Preparation and Revise: <ul><li>DQIP Workmanship Control Plan.</li><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li><li>Setup &amp; FAAR。</li><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li><li>MSA (GRR) gage</li><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li><li>PFMEA，</li><li>Assure the process risk control basing on efficient PFMEA.</li><li>NCR &amp; QA instruction&nbsp;</li><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non-confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D TECHS - 8D report prepare and TECHS system handling.</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results</li></ul> Training: <ul><li>providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Bachelor degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>MSA、SPC、FACA</li><li>Familiar with quality management tools, such as MSA, SPC, FACA etc</li></ul>

Responsibilities: Customer Quality Complaint Handling: <ul><li>Customer complaint initial check, on site investigation, CSR quick check &amp;support, strong driving ability to deliver solution for customer</li><li>Quick initial response or containment actions for customer</li><li>Publish complaint to company manufacturing plant and timely follow up</li><li>Internal 5D/8D driving / evaluation / on time deliver to customer</li><li>External 8D release and report to customer</li><li>Timely progress tracking, update and in time escalation</li><li>D6/LL/RA/CTP verification to make sure 8D effective closure&nbsp;</li></ul> Capability in Application &amp; Engineering:&nbsp; <ul><li>Good understanding of OEM production line assembly process</li><li>Strong problem solving ability &amp; tools capability like FTA, DOE...</li><li>Engineering basics such as GD&amp;T, good product &amp; application knowledges.</li><li>Sensitiveness to study/bench marking solutions from other competitors</li></ul> General quality topics coordination (internal &amp; external): <ul><li>Green scorecard driving with responsible key customers</li><li>Take leader as the pliot CQ leader for Chery, responsible for continues quality improvement coordination and regular meeting &amp; communication with various customer SQM interfaces.</li><li>Customer visit, CTP identify, proactive customer reporting &amp; quality workshop…coordination &amp;lead</li><li>Coordinate Training/Meeting/Audit/Quality documents...requested by customer&nbsp;</li><li>Manage the on site service people in Chery Wuhu, to deliver excellent service to customer</li></ul> Quality Data Analysis and Reporting: <ul><li>Maintain customer quality data in system/worksheet, timely tracking &amp; monitor.</li><li>Data analysis and reporting, performance tracking, improvement opportunity identify and driving.</li></ul> Requirements: <ul><li>Full-time degree or diploma holder</li><li>Minimum 3 years of customer quality experience </li><li>Previous exposure from automotive industry is preferred</li></ul>

Skills

Industry

Location

Jobtitle

38 connector assembly Jobs found

Sr MFG & Process DVL Engineer - Automation Mechanical

Operations Manager

Manufacturing Engineer

Research & Development Product Development Engineer II

125112 Vision System Engineer

Cost Modelling Analyst

Principal Signal Integrity Engineer

Fiber Optic Product Development Engineer

125112 Assembly Vision System Engineer

127202 / 127203 Customer Quality Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

38 connector assembly Jobs found

Sr MFG & Process DVL Engineer - Automation Mechanical

Operations Manager

Manufacturing Engineer

Research & Development Product Development Engineer II

125112 Vision System Engineer

Cost Modelling Analyst

Principal Signal Integrity Engineer

Fiber Optic Product Development Engineer

125112 Assembly Vision System Engineer

127202 / 127203 Customer Quality Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.