ASC Maintenance Engineering Specailist

Maintenance Planner

Instrument & Electrical Reliability Engineer

Reliability Engineer

Responsibilities:You are expected to be able to perform the following:Develop maintenance processes, maintenance management strategy, work and performance management strategy and conduct Maintenance health assessment in line with GME and corporate requirements. This includes PM and PdM strategies, Org. structures, manpower analysis, cost analysis, etc., and appraise and prepare reports on the effectiveness of such processes.Conduct data driven analyses to benchmark maintenance organization’s performance to identify gaps then set sustainable plan to close the gaps, this includes, but not limited to: Spending Analysis, Maintenance Effectiveness, operating costs of existing assets, PM, and PdM, Wrench time analysis, SAP Taxonomy, Planning & Scheduling, Personnel Competency, Budgeting Strategy, Bad Actors, and RAM Modeling. Analyze facilities’ maintenance performance to establish reference baseline & Issue frequent maintenance benchmarking reports to promote knowledge.Review maintenance reporting mechanism and KPIs along with their trends to drive performance and provide recommendations accordingly.Analyze maintenance spending in terms of manpower, equipment, materials procurement and outsource strategies.Assist the line maintenance organizations in the implementation of approved programs such as TPRM or GM reliability model.Develop methods and programs for handling new situations in maintenance fields. This will include prototype pumps, motors, compressors, turbines, valves, instrument systems and computer systems.Design, in conjunction with engineering personnel and vendor representatives, alternative parts or systems.Represent AMSD on standing Committees, Special Task Groups or Ad Hoc Committees.Recommend work which can be economically assigned to contractor organizations and develops scope of work.Report to concerned Maintenance Supervisor & Manager on quality and quantity of workmanship and adherence to standards within his assigned areas and recommends improved work methods.Ensure that periodic maintenance is performed in accordance with vendor recommendations and Company's procedures and that maintenance logs and records are maintained. Reviews Project Proposals to assure that maintenance aspects are considered in final design.Prepare Engineering Reports on maintenance activities/methods and means for their improvement. Requirements:As the successful candidate you will hold a Bachelor’s degree in Engineering from a recognized and approved program. A Mechanical Engineering Degree is preferred.You will have a minimum of ten years of relevant experience in the Oil & Gas downstream Sector.You will be able to demonstrate high degree of technical competence in the area of maintenance programs and practices.You will have experience with risk-based processes such as Reliability-Centered Maintenance & Risk Based MaintenanceYou will have experience with TotalProductive MaintenanceYou must have strong hands-on experience with Spare Parts and Materials procurement strategiesYou will have Best-in-class Maintenance Planning, Scheduling and Work Prioritization experienceYou must have strong Experience with Maintenance budgeting and spending control methodologies.You will have Experience in field maintenance methodologies, processes, and procedures.You will be able to demonstrate strong interpersonal & communication skills.You will be able to demonstrate strong analytical & problem-solving skillsYou will be able to demonstrate experience with CMMS such as SAPConversant with MS Office applicationsYou will be able to demonstrate ability to work under pressure and meet deadlinesYou will be able to demonstrate fluency in spoken and written English

Responsibilities:Use your knowledge in various SAP transactions to perform regular planner duty that includes, but is not limited to, opening/initiating internal orders, notifications, maintenance work-orders, planning the activities with required resources, ordering the materials, and track all maintenance activities within your respective area.Plan for equipment isolation and safety precautions and estimate job step craft man-hour requirements.Prepare weekly and daily schedules by reviewing backlog and coordinating work requirements to comply with operation rankings.ensure availability of all resources required are met and available, prior to scheduling work, and obtain approval of the schedule updates maintenance order statuses & follows up until completion of orders.Monitor the progress of the maintenance on a daily basis and give feedback to maintenance supervisor and supporting the execution team.Ensure the history is updated and technically completed on all works orders prior to closing them.Ensure onsite availability of all materials, manpower and service requirements.Process the return of all support equipment and machines (i.e. crane, forklift, air compressor, flood glitch, etc.)Daily contact/coordination with concerned parties that includes Operations Foremen, Maintenance Supervisors and personnel to clarify work scopes on Maintenance Work Orders, required resources, status update, and the path forward.Prepare detailed job step plans in proper execution sequence, with details of craft man-hour and crew size requirements for each step.Requirements:﻿You must have a minimum of 10 years’ experience in industrial maintenance planning.You must have high school certification. However, a Bachelor Degree in Engineering is preferred.You should have the ability to identify all materials, services, equipment’s, and special preparations required for each maintenance job.Knowledge of SAP is a must.Knowledge of MS Office is also required.

Responsibilities:People ManagementAdvise and assist Maintenance l&E Engineers, electricians, instrument technicians and production supervisors on complex electrical and instrument repairs and troubleshooting methodologies.Support all the efforts towards building a harmonious work environment to promote the spirit of cooperation and team building within the l&E Reliability Section.Provide required technical support in matters requiring higher level of expertise and consultation. Instrument & Electrical Assets IntegrityDevelop and implement Reliability strategies by utilizing conventional techniques such as Reliability Centred Maintenance (RCM), Root Cause Analysis (RCA), Preventive and Predictive maintenance (PPM) strategies, and other industry accepted reliability techniques to analyse l&E equipment failures and produce cost effective strategies to ensure safe and reliable operation of the plant.Implement Mechanical Integrity & Quality Assurance best practices. Work with other concerned departments to develop & execute appropriate Quality Assurance (QA) practices and develop a mechanism to assess the effectiveness of QA practices.Proactively identify l&E Equipment Reliability Issues and develop engineering solutions for chronic and sporadic equipment reliability problems. Work with technical, production and maintenance to implement solutions.Lead Reliability Improvement efforts of the plant from the platform of Reliability Improvement Teams (RITs).Perform Root Cause Failure Analysis to identify various failure modes and recommend strategies to help improve l&E equipment reliability.Evaluate RCA reports, criticality studies, equipment strategies, and risk assessments on equipment to ensure consistency and compliance with company procedures and policies.Evaluate facility incidents that affect reliability and ensure that appropriate RCAs are performed.Assist in tracking RCA findings and completing action items in a timely manner .Develop Instrumented Protective Systems (IPS) related work processes in the company to comply with regulatory requirements mandated both by International Standards (IEC61511/ISA 84) and Company Standards RMS 5700.Administer the development of detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection drawings, loop drawings, Instrument data sheets etc.Prepare technical inquiry requests to vendors, participate in the technical evaluation of vendor bid offers.Review vendor drawings and documents and review design calculation. Ensure vendor equipment specifications meet the design specifications and are within budgeted costs.Reviews equipment specs/designs to ensure equipment can meet reliability objectives.Participate as a technical adviser on capital projects and turnarounds.Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications.Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required.Review and optimize ITPMs for functionally critical l&E equipment (MICE).Drive consistency in l&E equipment design across the site as part of projects review including consistency in maintenance strategies.Provide communication to area resources about improvement projects.Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects.Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets.Champion continuous improvement fosters relationships between various plant functions to focus on total quality. Policies, Systems, Processes and ProceduresContribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes and practices taking into account ‘international leading practices in order to improve productivity and operational efficiency.Provide critical input to support the development of l&E Reliability Section’s systems, policies, processes, and procedures in order to meet business requirements.Ensure team members comply with all l&E Reliability Section’s policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. ReportingPrepare relevant reports in a timely and accurate manner in order to meet the departmentalPrepare relevant reports in a timely and accurate manner in order to meet the departmental requirements, policies and standards.Support supervisor in the preparation of the annual operating and capital budgets. Ensures reliability projects and activities are completed on time and within budget.Communicate ideas, present, and explain technical knowledge to stakeholders.Communicate to Supervisor to inform on issues that require additional follow up.Report incidents and near misses and participate in investigations as required. Quality, Health, Security, Safety and EnvironmentEnsure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high quality products/ services. Requirements:ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the fields of Electrical equipment & systems maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals IndustryOther Job Specific Requirements and/or Vocational AccreditationsWell conversant with protection and control systems of a large process plant involving High and Medium Voltages (132/33/6KV).Solid understanding of the concepts of electrical protection system design and intelligent protection relays operation.Experience in failure mode & effect analysis and good understanding of failure mechanisms of Electrical equipment.Troubleshooting techniques and ability to analyze and resolve engineering problems independently.Knowledge of relevant IEC and IEEE Standards and or other well recognized standards.Familiarity with ETAP and similar system modeling and analyzing tools would be an additional advantage.Relevant experience in having performed load flow & short circuit studies, Relay discrimination and coordination studies for an industrial electrical distribution system.Familiarity with CMMS preferably SAP.Sound understanding of industrial PLC and Packaged control systems. EducationRequired (Qualification1 / Discipline): ﻿Bachelor’s degree in electrical/ Electronics/Instrumentation Engineering. ExperienceRequired (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the field of Instrumentation &Controls maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Experience in Petrochemicals Industry. Other Job Specific Requirements and/or Vocational AccreditationsKnowledge of automation/control systems, including: DCS, PLC, Safety Instrumented Systems, function block and ladder logic programming, industrial instrumentation, electrical equipment and process analytical systems.Experience with design and maintenance of Plant Instrumentation, Control Valves, and Safety Instrumented Systems and process safety management programs.Functional Safety Certification as Functional Safety Engineer (FS Eng.) preferred.Hands on experience on the use of ExSILentia software preferred.Working Knowledge on International Standards related to Instrumentation and Controls design and maintenance such as IEC, ISA, FCI etc. as well as Functional Safety standards IEC61511/ISA 84.Experience in failure mode & effect analysis and good understanding of failure mechanisms of instruments employed in a process industry.Troubleshooting techniques and ability to analyse and resolve engineering problems independently. 

Overview:The Reliability Engineer will apply technical knowledge to deliver continuous improvement in process and asset reliability through the detection and elimination of defects. In this role, you will partner with the team to ensure the fulfillment of reliability engineering strategies.Responsibilities:Implement moderately complex reliability excellence activities and identify and prioritize reliability engineering value creation opportunities.Execute the development, design and installation of predictive maintenance programs and technology in alignment with the area procedures.Prepare technical reviews of moderately complex projects and collaborate with related areas on new equipment reliability specifications.Perform the identification and elimination of bad actors and the optimization of equipment availability.Collaborate with and provide guidance to maintenance repairs and production in reliability related processes and the identification of critical spares.Independently solve moderately complex issues with minimal supervision, while escalating more complex issues to appropriate staff.Other duties as assignedRequirements:Minimum Qualification:Bachelor’s degree in a related field or equivalent experienceMinimum of two years of related work experienceOther minimum qualifications may apply.Preferred Qualification:BE Mechanical or Electrical with overall 9 plus years’ experience in reliability excellence.Shall be able to work in CMMS, conversant on working out Asset framework, criticality ranking of assets.Shall prepared and implement EMS (Equipment Maintenance Strategy)Shall be able to work out RCM FULL (Reliability Centred Maintenance), scheduling, QPM.Preparing and ensuring compliance to standard maintenance procedures, preventive, predictive maintenance schedules to increase machine uptime & equipment reliability.Address breakdown incidents in incident management system and conduct root cause failure analysis and capture lessons learned for system improvement.Provide input for preparation of the Department/ Section budgets and assist in the implementation of the approved Budget and work plans to deliver Section objectives.Ability to handle work force and impart training to the shop floor technicians and Engineers.Shall have a good Management Information system.(MIS) related to Reliability Excellence.

Skills

Industry

Location

Jobtitle

4 cmms Jobs found

ASC Maintenance Engineering Specailist

Maintenance Planner

Instrument & Electrical Reliability Engineer

Reliability Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

4 cmms Jobs found

ASC Maintenance Engineering Specailist

Maintenance Planner

Instrument & Electrical Reliability Engineer

Reliability Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.