Research & Development Product Development Engineer II

124532 Stamping Die Engineer

124542 Technical Specialist

120368 Senior Manufacturing Engineer

Principal Signal Integrity Engineer

Laboratory Supervisor

123457 Senior Mechanical R&D/Product Development Engineer

120267 Stamping Manufacturing & Process Development Engineer

125710 IE Staff Manufacturing Engineer

121835 Senior Manufacturing Engineer

Responsibilities: <ul><li>The R&amp;D/Product Development Engineering is responsible for the design, development of product line extensions of legacy product, with a focus on sustaining engineering of contactors/relays, power distribution panels and related products for applications in aerospace electrical power distribution and management systems.&nbsp;</li><li>The ideal candidate should be able to work independently and within a team-based environment. Determine product requirements based on internal/external product design specifications and Voice of the Customer inputs. Plan and record results of design, development, and sustaining activities, including validation testing.&nbsp;</li><li>Design to cost target while meeting financial and performance expectations.&nbsp;</li><li>Manage Bill of Materials for products. Facilitate cost reduction activities on new and existing products. Perform calculations, analysis, and testing to ensure that a product meets specifications. Participate in and/or lead Design and Process failure mode and effects analysis.&nbsp;</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers, and external customers.&nbsp;</li><li>Initiate and manage engineering change activities. Apply electrical, electronic, and mechanical principles to components, including assembly, analysis, and documentation of results.&nbsp;</li><li>Supports, participates, and leads design, test, modification, fabrication, and assembly of prototype devices.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree</li><li>3-5 years of experience</li><li>Experience circuit design, testing, and troubleshooting</li><li>Experience in mechanical design</li><li>Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors)</li><li>Knowledge of EMI/EMC is a plus</li><li>Good communication verbal and written</li><li>Experience in the use of Creo Wildfire software or similar CAD software</li><li>Windchill PDMLink is a plus</li><li>Knowledge of SAP is a plus</li><li>Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred</li><li>Knowledge of circuit analysis software such as TINA or SPICE</li><li>Knowledge of ANSYS or similar analysis tools is a bonus</li><li>Experience in Altium software or similar software is a bonus</li><li>Proficient in MS Office Suite of Products</li><li>Ability to read schematic diagrams</li></ul>

Responsibilities: Rules &amp; Procedures: <ul><li>Serve on-site production delivery and quality performance, be responsible for solving difficult problems and continuous improvement of mold maintenance technology, </li><li>TPM management performance of mold maintenance &amp; spare parts management, etc., and effectively implement TEs core values.</li></ul> Solve difficult problems in mold maintenance technology &amp; continuous improvement: <ul><li>Analysis and solution of various mold technical problems in the mold production process &amp; continuous improvement, involving quality, output, abnormal downtime, work efficiency, etc., with engineering and technical ideas to analyze the causes of problems, solution design drawings and result verification, and effectively expand horizontally.</li><li>Summarize the experience of solving technical problems of mold maintenance, and continue to improve the standardization of mold maintenance</li></ul> Mold Repair TPM Management Performance &amp; Spare Parts Management Improvement: <ul><li>Mold maintenance preventive work summary and machine change planning, effectively improve mold maintenance abnormal shutdown, maintenance work efficiency and maintenance and repair time cycle.</li><li>Effectively improve the accuracy of mold parts management and abnormal fast response, and continuously improve the maintenance cost and inventory of mold parts.</li></ul> Requirements: Education:&nbsp; <ul><li>Major, Mechanical design/Mold design, etc., college degree or above Plus read and write English</li></ul> Work experience: <ul><li>Process Engineer More than two years of on-site maintenance experience in stamping dies, CI Engineer&nbsp;</li><li>precision stamping/ordinary stamping</li><li>More than two years of stamping die engineering technology improvement (design IE engineer&nbsp;</li><li>production technician Work experience, working experience in the electronic stamping industry of foreign companies Stamping Process Technician&nbsp;</li><li>UP Technician (Bond6) Priority is given to testing.</li><li>ME Backup</li></ul> Ability requirements: <ul><li>Proficient in the use of CAD and other engineering drawing software, mold parts design improvement drawings, specific technical problems analysis and engineering technology improvement ability;</li><li>Proficient in the use of office software, able to conduct data analysis and summary, experience summary of difficult problems and continuous improvement and follow-up ability.</li><li>Familiar with lean/problem solving tool applications such as lean KAIZEN, TPM, STD work, etc., and familiar with the application of management performance indicators such as OEE, QCO, spare parts management, etc.</li><li>Familiar with five major tools such as quality management, PFMEA, APQP and so on is preferred.</li><li>Good communication skills, teamwork, problem-solving and planning skills.</li></ul>

Responsibilities:&nbsp; <ul><li>Improvement of the injection molding process.&nbsp;</li><li>Improvement and promotion of automation.&nbsp;</li><li>Responsible for the production and maintenance of digital reports, visual kanbans in the injection molding workshop</li><li>Troubleshoot problems, identify root causes, and propose or implement solutions.</li><li>Assist in the implementation of new systems, applications, or technologies.</li></ul> Requirements: <ul><li>Bachelor degree or above, major in automation, machinery or related</li><li>More than 3 years of relevant work experience in precision injection molding/molding/intelligent manufacturing&nbsp;</li><li>Proficient in Power BI, Sailsoft, Excel/PowerǪuery, SǪL applications&nbsp;</li><li>Good reading and writing skills in English&nbsp;</li><li>Experience with injection mold design/process debugging is preferred, as well as the use of Creo, CAD and other software&nbsp;</li></ul>

Responsibilities: Capacity planning for short-term &amp; long-term according to production requirements: <ul><li>Machine, Tool, Labor, Layout capacity management</li><li>Capacity improvement plan</li></ul> Cost analysis and cost improvement management: <ul><li>Cost analysts are involved in detailed cost research and comparative analysis including to competitors.</li><li>Drive cost reduction initiatives</li></ul> Upgrade the productivity and achieve cost control target: <ul><li>Identify, lead &amp; drive efficiency improvement projects to reduce the conversion cost;&nbsp;</li><li>Set and control the manufacturing standard time</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or equivalent education with IE major</li></ul> Qualification &amp; Certification: <ul><li>Familiar with MS office software</li><li>Familiar with Auto-CAD drawing</li></ul> Experience: <ul><li>4+ years on industrial engineering experience, lean/6 six sigma related</li><li>Cost analysis related background is plus;</li><li>Have independent project leader experience</li></ul> Technical Skill &amp; Competencies: <ul><li>Layout for exist and new expansion, Optimize the plant/workshop layout to improve space utilization</li><li>Capacity forecast and adjustment, analysis improvement opportunity and make investment proposal</li><li>Lead labor efficiency &amp; line balance improve/optimization</li><li>Involve key project detail design of machine/material/process</li><li>Deep understand of IE toolset, such as ECRS/Time study/cell design</li></ul>

Responsibilities: <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles</li><li>Establishing signal integrity design performance/functional requirements for new products</li><li>Performing signal integrity simulations for multiple high-speed standards on each product.&nbsp;</li><li>This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.</li><li>Performing PCB design schematic and layout reviews</li><li>Creating actionable recommendations based upon design reviews and simulation results</li><li>Guiding connector design and component qualifications from a signal integrity standpoint.&nbsp;</li><li>Making data driven decisions about the product functionality and areas for improvement.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering; Masters Degree preferred</li><li>Minimum of 10 years of relevant work experience in electrical Design, RF design or PCB design</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior&nbsp;</li><li>Expert with Signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools)</li><li>Expert with 3D CAD tools (SpaceClaim preferred, AutoCAD, Creo, or equivalent)</li><li>Expert with high-speed test equipment (VNA, TDR, BERT)</li><li>Expert with interconnect design or electronic packaging, with a preferred focus on high-speed differential connectors and/or cable assemblies, RF connectors, and channel integration.</li><li>Expert with printed circuit board layout and design (Altium preferred), fabrication and assembly, especially as associated with connector FP and card-edge interfaces</li><li>Proficient with data analysis techniques, appreciation for design geometry tolerance impacts, and HVM qualification.</li><li>Experience with physical layer communications systems and architectures.</li><li>Fluent in English (both verbal and written)&nbsp;</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Expert in analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.</li><li>Learning Capability: Open minded, coachable, willing to learn new skills, and motivated to grow</li><li>Pro-active in identifying complex situations, providing solutions, and driving improvements to evolving procedures</li><li>Experience writing technical papers and presenting to BU-level organizations, external conferences, and critical customer contacts</li><li>Proficient at owning project SI responsibilities and driving team actions across multi-discipline engineering &amp; manufacturing teams</li></ul>

Responsibilities: <ul><li>Collaborates with engineering, operations and customers to plan and test products.</li><li>Facilitates development processes, coordinates materials and component integration.</li><li>Execution and evaluation of tests.</li><li>Support of the laboratory team with special technical problem solving.</li><li>Scheduling and allocation of tests to be carried out.</li><li>Equipment utilization optimization</li><li>Clarification of the test conditions and the creation of the specifications for the test</li><li>Continuous improvement process,EHS</li><li>Disciplinary and methodical leading of the team Creates and monitors development plans; communicates working activities/status to team, management, sales and operations.</li><li>Supervises and supports development staff; participates in training, development and performance management of team members, as well as conducting annual employee evaluations.</li></ul> Requirements: <ul><li>Bachelor’s degree in electrical engineering is a must. Master’s degree is a plus.</li><li>Minimum of 2 years of experience in a supervising role in a test laboratory related to electrical testing.</li><li>MS Office.</li><li>Automation knowledge is an advantage.</li><li>Electrical schematic basics are an advantage.</li><li>CAD basics are an advantage.</li><li>Knowedgle of the system LIMS (Laboratory Information Managment System) is an advantage.</li><li>Electronic design and PCB routing is an advantage.</li><li>English fluent and fluent in Czech.</li></ul>

Responsibilities: <ul><li>Participates in the engineering core team for projects from initial concept to production release in a timely, innovative manner.&nbsp;</li><li>Proficient skills in the drawing and simulation tools ( CAD, Creo, ANSYS,...)to create and optimize design, especially good at structural design and innovation.</li><li>Providing engineering support of cable accessories including Lite and sustaining projects.&nbsp;</li><li>Technical understanding of power system products and related standards</li><li>Interprets related standards, analyzes data, creates test reports, and provides presentations.&nbsp;</li><li>Innovative, computer literate, low to moderate travel, power industry experience or equivalent essential.&nbsp;</li><li>Possess excellent problem-solving skills, be able to work independently, and drive projects to completion. failure analysis and improvement timely.</li><li>Coordinate with other functional and oversea regional teams (including EMEA, US and Asia...)for the technical development in order to achieve targeted cross functional project goals and schedule.</li><li>Daily system management and file management</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Min. bachelor degree in Mechanical Engineering related major. Graduated degree is prefer.</li><li>Good English communication skills, including listening, speaking and writing.&nbsp;</li><li>Experience in power product development at least 5 years, especially cable accessory product development.&nbsp;</li><li>knowledge and experience of materials and production processes used in power products.</li></ul>

Responsibilities: <ul><li>End to end connector manufacturing process development (From raw material to components process and to final assemblies), overall manufacturing process owner, guiding team for the best manufacturable process &amp; the best cost process development.</li><li>Concept design &amp; proofing for overall assembly process and tooling, Process development DOE.</li><li>Technical leader and trouble shooter from LVM to HVM in process development, tooling design &amp; qualification, issue finding and problem solving</li><li>Platforming manufacturing process development.</li><li>Provide detail process definition and requirements to automation team for Auto MC development&nbsp;</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul> Requirements: <ul><li>Bachelor or above degree in mechanical engineering or related background.</li><li>8+ yrs. in connector assembly process development or automation development.</li><li>Data oriented issue finding and problem-solving skills.</li><li>Sensitive on product cost, know how to drive cost through manufacturing process development &amp; design optimization.</li><li>Fluent in using of basic process development related tools like DFM, PFMEA，DOE，FAA, CTAR， CAD，Pro E</li><li>Knowledge of quality control and quality issue analysis and improvement</li><li>Good teamwork and communication skills&nbsp;</li><li>Fluent in written and Spoken English.</li></ul>

Responsibilities:&nbsp; <ul><li>Lead plant layout management, overall driven new production line design, transfer layout, new plant layout design;</li><li>Capacity and HC management, work with supply chain to evaluate HC/Line/equipment deployment and output standard;</li><li>Identify and drive KAIZEN projects to reduce the operation cost.</li><li>Work with PSE for new project input, line balance, waste eliminate, efficiency improvement;</li><li>Support product line and equipment acceptance</li><li>Identify and overall leading labor efficiency improvement；</li><li>Supporting operation and solve specific problems in operation</li></ul> Requirements: <ul><li>Education: Bachelor degree in Industrial Engineering related majors.</li><li>Qualification &amp; Certification:&nbsp;</li><li>Fluent with Microsoft Office</li><li>Good at CAD drawing</li><li>GB or BB is plus</li><li>Experience:</li><li>8+ years progressive experience in Lean / IE background;</li><li>Familiar with Auto parts industry, cable area is plus;</li></ul> Technical Skill &amp; Competencies <ul><li>Need solid experience for site/plant layout design and material flow design;</li><li>Experience as project leader to improvement projects.</li><li>Good communication and rich experience for IE knowledge;</li><li>Be proficient at IE &amp; Lean manufacturing tools for continues improvement.</li><li>Familiar with lean methodology, mindset</li></ul>

Responsibilities: <ul><li>Mold drawings control and updating</li><li>Routine troubleshooting of molds and molding processes.</li><li>Develop an improvement plan and control the progress.</li><li>Publication of WI and PFMEA.</li><li>Increase tooling capacity.</li><li>Experience in injection mold design, familiar with the use of pro-E or UG software</li><li>It is mainly responsible for the maintenance and improvement of molds, and does not involve the design of new molds</li><li>Maintenance and improvement of mass production molds, and problem solving of production lines</li></ul> Requirements: <ul><li>Bachelors degree or above, can communicate in spoken English</li><li>More than 5 years of experience in mold design or mold improvement.</li><li>More than 3 years of experience in molding process.</li><li>Rich experience in plastic molds and molding.</li><li>Familiarity with automotive industry norms.</li><li>Proficiency in the use of Pro/E or UG, AUTO CAD、Power point、excel outlook。</li></ul>

Skills

Industry

Location

Jobtitle

15 cad Jobs found

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

124542 Technical Specialist

120368 Senior Manufacturing Engineer

Principal Signal Integrity Engineer

Laboratory Supervisor

123457 Senior Mechanical R&D/Product Development Engineer

120267 Stamping Manufacturing & Process Development Engineer

125710 IE Staff Manufacturing Engineer

121835 Senior Manufacturing Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

15 cad Jobs found

Research & Development Product Development Engineer II

124532 Stamping Die Engineer

124542 Technical Specialist

120368 Senior Manufacturing Engineer

Principal Signal Integrity Engineer

Laboratory Supervisor

123457 Senior Mechanical R&D/Product Development Engineer

120267 Stamping Manufacturing & Process Development Engineer

125710 IE Staff Manufacturing Engineer

121835 Senior Manufacturing Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.