Research Development Product Development Engineer II

Product manger

Test Engineer

R&D Engineering Manager II

Product Development Engineering (Mechanical)

Quality & Reliability Technician

IT System Analyst

Sr MFG & Process DVL Engineer - Automation Mechanical

SAP Fiori Engineer (Hybrid)

SAP Senior Software Engineer (Hybrid)

Responsibilities: <ul><li>Generate and maintain project documentation including schematics, drawings, test data, and reports</li><li>Design and develop electronic circuits while incorporating mechanical design</li><li>Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment</li><li>Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations.</li><li>Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities. Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers.</li><li>10% travel domestic/international (Passport will be required).</li></ul>&nbsp;Requirements: <ul><li>Bachelor’s Degree in engineering, electronic or electro-mechanical degree 3-5 years of experience Experience circuit design, testing, and troubleshooting.</li><li>Experience in mechanical design Knowledge of electro-mechanical devices and/or magnetics (e.g., relays and contactors).</li><li>Knowledge of EMI/EMC is a plus.</li><li>Good communication verbal and written.</li><li>Experience in the use of Creo Wildfire software or similar CAD software Windchill PDM Link is a plus Knowledge of SAP is a plus Knowledge of Lean Six Sigma Green Belt is a plus</li><li>Knowledge of analog circuitry is preferred Knowledge of circuit analysis software such as TINA or SPICE Knowledge of ANSYS or similar analysis tools is a bonus Experience in Altium software or similar software is a bonus.</li><li>Proficient in MS Office Suite of Products Ability to read schematic diagrams Generate and maintain project documentation including schematics, drawings, test data, and reports Design and develop electronic circuits while incorporating mechanical design Tasks will include using equipment such as oscilloscopes, multimeters, power supplies and additional test equipment Plan and record results of design, development and sustaining activities, including validation testing.</li><li>Design to cost target while meeting financial and performance expectations. Manage Bill of Materials for new products.</li><li>Facilitate cost reduction activities on new and existing products.</li><li>Perform calculations, analysis, and testing to ensure that a product meets specifications.</li><li>Participate in and/or lead Design and Process failure mode and effects analysis.</li><li>Provide support to both internal manufacturing, quality, Product/Project Managers and external customers.</li><li>Initiate and manage engineering change activities.</li><li>Including notification to customers using external customer systems.</li><li>Collaborates with other colleagues and peers 10% travel domestic/international (Passport will be required) #TANAKR #LI-ONSITE.</li></ul>

Responsibilities: Undertake overall Responsibility:&nbsp; <ul><li>Manage in FA function and leading new technology to coordinating with engineering to develop core Tech and able to expand to lab levels for daily delegated tasks to manage the related database consolidation. </li><li>Driving with company A improvement on process or capability improvement to make lab goals achieved and support engineering to win in markets.&nbsp;</li></ul> Responsible for Strategy:&nbsp; <ul><li>Set clear FA direction goals and develop strategies with high-level visions that reframes what winning looks like and approaches to fulfil new technology assignments in creative and meaningful ways.</li><li>Providing strategy for FA/Lab directions align with organization value drivers and tactics to key program execution with excellence and flexible.&nbsp;</li><li>Such as Identify FA team with right size, people skills and address technical assistance to design feasibility and make recommendations for necessary changes.</li><li>Transform stakeholders need and assess FA/Lab capability tried-and-true options for scenarios allocate resources to high priorities (people, cost $, management attention, sustainability etc) to significantly shorten the product design cycle and help bring products to market faster while ensuring high quality and performance.&nbsp;</li><li>also sorts of possibilities to creating an optimal flow to shaping up team to be more engaging and easier to follow.</li><li>With financial knowledges to assess capability and predict organization forecast and analysis per budget scope, and build long-term constructive common ground network across the adjacent functions such as Product Engineering, Project Engineering and Field Application Engineering etc.&nbsp;</li><li>Align organization culture targeting and systematically pursuing specific areas for further secure lab competitiveness, i.e. (Software/ System/CoE/ 3DP/New Tech etc)&nbsp;</li></ul> Responsible for lab strategy mobilization and execution: <ul><li>Communicate and distribute the requirements per lab programs implementation keeps FA/Lab ahead of or at pace with the competition,</li><li>Boost and Outline the necessary investment plan of amount, relevance, and quality of test equipment in FA/lab, driving efficiency to maximize value and return on investment.</li><li>Create and use systems for monitoring and manage various performance in FA function OKR/KPIs to process control and follow up and streamline the process and balance of stability and agility that maximizes the speed and effectiveness by using digital data-driven techniques, show diagram visually.</li><li>Broad knowledge to develop FA/Test/3DP etc method per core technology to foster FA/lab growing, and design new correction/prevention quality initiatives to pinpoint the risks and minimize lab operation obstacles, build resilience ahead of any potential crises and update risk assessments so that enable lab able to mitigate the impact and unlock opportunities.</li><li>Define FA/Lab operation mechanism, criteria, and management discipline to ensure FA/Lab for daily work what is in good working order.&nbsp;</li><li>Leading Team use data to make timely decisions.&nbsp;</li><li>Research new development method and set guidelines enables engineering/manufacturers to better process control and maintain quality within acceptable limits to prevent failure in early stage, approaching smart tech to accelerate the testing, inspection, and analysis activities,&nbsp;</li></ul> Succession Talent Effectiveness: <ul><li>Identify key talents per OLR and drive team and equip team development goals to ensure most value-creating roles in lab filled with right position.</li><li>Capable with management skills to prepare effective office support in place, such as Give Training and properly communicate findings so as to help team to continuously improving their abilities to ensure lab organization successfully and sustainable as whole team can do or to achieving next level.</li></ul> Requirements: <ul><li>Master degree or above level of qualification in Engineering technology areas</li><li>Minimum 8+years of similar industry Engineering field and for management, English listening, speaking, writing ability are required</li><li>Experience in technical technology on validation test, Failure Analysis, or 3D printing, tool application or system Engineering preferred</li><li>Proactive oriented and tenacity to results driven</li><li>Practioner well on logic and structure skills</li><li>Manager level experiences with ISO/IEC 17025 lab system standards and engineering skills</li><li>Demonstrated ability in conducting audits and all aspects of communication, collaboration and team building skills.</li><li>Proficient ability in developed the new tech to reduce redundant testing or inspection activities , or experience for new program/project boosting and launch preferred</li><li>Outstanding engineering background and Test field for know organization management and with software capabilities would prefer</li></ul>

Responsibilities: <ul><li>Designing and developing new products to meet customer requirements within scope, schedule, and budget constraints by following company LeanPD process.</li><li>Innovating original ideas and design proposal for new products, studying the feasibility of customer specifications.</li><li>Leading new product technical data output, such as: 3D, 2D drawing and Design objective.&nbsp;</li><li>Initiating product design document, such as: PRD, DV/PV plan, Product review, Initial BOM, DFMEA and Significant Characteristic.&nbsp;</li><li>Leading product design review with function team and technical review with customer, and communicating with supplier feasibility study of components material.&nbsp;</li><li>Performing engineering calculations to analyze and describe product to ensure robust design with economic cost.</li><li>Working with FAI approvals, technical risk analysis, supporting 8D report and 5 WHY analysis, judging manufacturing deviations and making decisions on deviation acceptance.</li><li>Improving and enlarging existing products, quality improve and manufacture engineering support. Helping resolve technical problems or providing solutions of avoiding problems to ensure accurate implementation of production.</li><li>Understanding product testing procedures and equipment, reviewing evaluation or test report and confirming accuracy of report contents to ensure product meets quality specification.</li><li>Reviewing patent searches to evaluate patentability of proposed designs to ensure that others patents are not infringed upon.&nbsp;&nbsp;</li><li>Providing innovative solutions to reduce product cost, improving product quality, and improving process efficiency, documents and communicates potential IP to ensure TEs IP is protected.</li><li>Providing technical support to customers and Sales Engineers to ensure proper application of products in the field.</li></ul> Requirements: Education:&nbsp; <ul><li>B.S. of Engineering or Master or PHD, Mechanical Engineering preferred.</li></ul> Qualification &amp; Certification: <ul><li>Ability to perform complicated product development.</li><li>Be familiar with the customers requirements and transforms them into design objectives through communication with the customer.&nbsp;&nbsp;</li><li>Be familiar with related automotive standards such as USCAR, SAE,LV15, etc.</li><li>English good.</li></ul> Experience: <ul><li>B.S. of Engineering with 5 or more years of experience or Masters of Science with 2 or years of experience or PHD</li><li>More than 2 years HV Connector Design related experience.</li></ul> Technical Skill &amp; Competencies: <ul><li>Be familiar with product development process and related product manufacturing process.</li><li>Understanding of special characteristic significance for customer and TE</li><li>Understanding of basic automotive industry core tools, such as APQP, FMEA and PPAP.</li><li>A complete understanding and wide application of technical theories, principles, engineering tools and techniques, such as: GD&amp;T, DFM, DFA, DFSS, etc.</li><li>Ability to skillful use Cero software and drawing design, tolerance calculation.</li><li>Familiar with stamping, plating, molding, assembly and machine Application process.</li><li>Understanding of relevant technical standards and law regulations.</li><li>Ability to build strong internal/external working relationship.</li><li>Effective Interacts and communication within the team.</li></ul>

Responsibilities: Testing Equipment/Measuring Tool Calibration, Management, and Maintenance <ul><li>To ensure the effectiveness and quality of testing equipment and measuring tools, participate in the calibration of testing devices and manage all testing equipment in the factory according to the testing equipment/measuring tool management standards.</li><li>Monitor the operational status of experimental equipment.</li><li>Develop calibration plans that translate national and customer calibration requirements into internal calibration guidelines and work instructions.</li><li>Assign identification numbers to all inspection equipment in the company.</li><li>Regularly calibrate equipment; contact external calibration agencies to assess their capabilities and perform external calibration on equipment that exceeds internal calibration capabilities to ensure accuracy.</li></ul> Cross-Section Sample Preparation / High-Frequency Testing Fixture Maintenance and Test Anomaly Analysis <ul><li>To ensure the accuracy of test results, assist testing engineers in analyzing and addressing anomalies in production and laboratory tests.</li><li>To assist ME/QC in confirming the terminal riveting process during production, prepare cross-section samples of terminals when testing technicians/engineers are off duty.</li><li>To ensure the accuracy of high-frequency testing, manage the preparation, maintenance, and management of high-frequency testing fixtures.</li></ul> Testing Equipment Safety Confirmation <ul><li>To ensure the safety of the testing equipment on-site, implement safety inspections and confirmations of the testing equipment in the field.</li></ul> Production and Maintenance of High-Frequency Testing Fixtures <ul><li>Assign identification numbers for all high-frequency testing fixtures on the production line for management and monitor their usage frequency. This includes the production and maintenance of all high-frequency testing fixtures on the production line, as well as the welding and fabrication of high-frequency fixtures for NPI products.</li></ul> Requirements: Education, Major, Work Experience: <ul><li>High school/vocational school or above</li><li>Over 1 year of testing experience in the electronics industry</li></ul> Skills Requirements: <ul><li>Good communication skills, sense of responsibility, analytical abilities</li></ul>

Responsibilities: <ul><li>Review system/application design specifications of document management system developed in (OpenText, SharePoint, Newgen etc..)</li><li>Requirement gathering, requirement analysis, business process mapping, prepare business requirement specification, flow charts, logical diagrams, process improvements</li><li>Review design and hands on work on GCC/GCC+ preferred Azure.</li><li>Facilitate and support the System Integration Test and User Acceptance Test.</li><li>Coordinate, facilitate and support any audit to be conducted by the Authority’s appointed auditor(s) on the IT application systems (hereinafter known as the “Systems”).</li><li>Understand and review source codes from vendor(s) for deployment.</li><li>Provide technical and project management support which includes managing the daily operations of the Systems, performing continuous review to improve the Systems, and ensuring that the Authority’s appointed contractor(s) complies with the Authority’s requirements.</li><li>Offer support in managing, maintaining, and testing Systems, ensuring their efficient operation and functionality.</li><li>Collaborate with business stakeholders and work closely with external parties, ICT providers or government agencies for the operational and maintenance works and new initiatives/enhancements of Systems.</li><li>Manage and maintain IT Processes, track technical documentation and monitoring of progress; i) Review project deliverables (e.g. monthly project report, log review for privileged user access, test plan, test reports, application design/ code) to ensure the completeness for acceptance; j) Provide IT operation support for Systems; and</li><li>Ensure that the delivery of the project is compliant with relevant policies and guidelines and to identify and close any compliance gaps.</li><li>Review system/application design specifications of document management system developed in (OpenText, SharePoint, Newgen etc.)</li><li>Requirement gathering, requirement analysis, business process mapping, prepare business requirement specification, flow charts, logical diagrams, process improvements</li><li>Review design and hands on work on GCC/GCC+ preferred Azure.</li><li>Facilitate and support the System Integration Test and User Acceptance Test.</li></ul> Requirements: <ul><li>Bachelor’s degree in Computer Science, Information Technology, or related field;&nbsp;</li><li>5 to 8 years relevant experience.</li></ul>

Responsibilities: Equipment design and debugging reception <ul><li>Work with vendors to set up/debug automation machine; Timely feedback and solve the problem to ensure the progress of the project</li></ul> Technical support <ul><li>Provide technical support to manufacturing during pilot run and production start-up/change over</li></ul> Problem solving <ul><li>Problem identification and trouble-shooting a wide range of complex mechanical problems for automation line</li><li>Responsible for the effective communication across the company</li></ul> Training guidance <ul><li>Instruct technicians and participate in automatic line maintenance and product changeover work</li><li>Line maintenance/change over together with/guiding the technicians to make sure automation machine run smoothly</li></ul> Requirements: Education, Technical Qualification &amp; Experience <ul><li>Bachelor degree, major in mechanical engineering/automation/mechatronics, the academic requirements can be relaxed for outstanding candidates</li><li>Minimum 5 years of experience w/ automated assembly machines, skilled in fixture/jig design and trouble-shooting for automation machine;</li><li>Familiar with Vision Inspection (Keyence/Cognex), Programmable Logic Controllers (PLC), Pneumatics, sensors, motors and other motion control devices and components selection;</li><li>Robot knowledge will be a plus;</li><li>Interfacing knowledge between mechanical and electrical;</li><li>Familiar with Pro-E or SolidWorks, AutoCAD software to create 2D and 3D drawing;</li><li>Proven strong analytical and problem solving skills, good interpersonal skills.</li><li>English skills, able to ready technical materials in English.</li></ul>

Responsibilities: <ul><li>Understanding the business needs and translating them into functional and technical requirements for the SAP Fiori platform.</li><li>Designing, developing, and implementing SAP Fiori apps using SAPUI5, JavaScript, HTML5, and CSS</li><li>Integrating SAP Fiori apps with other SAP solutions and systems</li><li>Optimizing the performance of SAP Fiori applications and ensuring their compatibility with multiple devices</li><li>Providing technical support and troubleshooting for SAP Fiori applications</li><li>Keeping up to date with the latest SAP technologies and applying them to improve the SAP Fiori platform.</li><li>Ensure Fiori applications are optimized for best performance.</li><li>Participate in application testing and deployment.</li><li>Handle basic issues and problems under direct supervision, while escalating more complex issues to appropriate staff.</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in computer science or equivalent experience,</li><li>Confirmed experience building front end or back end of application based on popular design patterns</li><li>Minimum of two years of related work experience</li><li>Preferred Qualifications</li><li>Experience as an SAP Fiori consultant or similar</li><li>Experience in SAP Fiori application design, development, and implementation</li><li>Strong understanding of SAP ABAP and UI5</li></ul>

Responsibilities: <ul><li>Apply software engineering patterns and principles to design, develop, test, integrate, maintain and troubleshoot complex and varied software solutions and incorporate security practices in newly developed and maintained applications.</li><li>Participate in peer code review sessions to review code, coach peers and ensure code quality.</li><li>Take the lead in the assigned agile team to adopt agile philosophies, facilitate agile ceremonies and identify continuous improvement opportunities.</li><li>Incorporate the companys engineering and development best practices within the full software development lifecycle including coding standards, code reviews, source control management, building processes, testing and security principles, to deliver high quality code rapidly.</li><li>Collaborate to lead demonstration and continuous feedback sessions to improve development and help drive the long term vision.</li><li>Participate in the engineering community by maintaining and sharing relevant technical approaches and modern skills.</li><li>Independently handle complex issues with minimal supervision, while escalating only the most complex issues to appropriate staff.</li><li>Other duties as assigned</li></ul> Requirements: Qualifications Minimum Qualifications <ul><li>Bachelors degree in a related field or equivalent experience</li><li>Confirmed experience automating pipelines for continuous integration, testing, delivery and security</li><li>Confirmed experience architecting applications, databases, services or integrations</li><li>Minimum of four years of related work experience</li></ul> Preferred Qualifications <ul><li>Experience within SAP ABAP, Fiori, and OOP</li><li>Experience with Enhancement framework, CDS Views, AMDP, BOPF</li><li>Experience with Odata, Web Services, PI/PO, MII, ALE, and idoc</li><li>Experience with Adobe forms</li><li>Exposure to Agricultural Commodity Management (ACM) or prior experience with Commodity Trading and Settlement.</li></ul>

Skills

Industry

Location

Jobtitle

54 automated testing Jobs found

Research Development Product Development Engineer II

Product manger

Test Engineer

R&D Engineering Manager II

Product Development Engineering (Mechanical)

Quality & Reliability Technician

IT System Analyst

Sr MFG & Process DVL Engineer - Automation Mechanical

SAP Fiori Engineer (Hybrid)

SAP Senior Software Engineer (Hybrid)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

54 automated testing Jobs found

Research Development Product Development Engineer II

Product manger

Test Engineer

R&D Engineering Manager II

Product Development Engineering (Mechanical)

Quality & Reliability Technician

IT System Analyst

Sr MFG & Process DVL Engineer - Automation Mechanical

SAP Fiori Engineer (Hybrid)

SAP Senior Software Engineer (Hybrid)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.