Continuous Improvement Analyst

Sr Manufacturing Process and Development Engineer (Automation)

Principal R&D/Product DVL Engineer

Electrical Design Engineer

Sr. Engineer (New Energy)

Validation Engineer

Responsibilities: <ul><li>Driving CCSI (Productivity saving) and OMP (Material saving) including identify new opportunity, work with cross functional team to build up project, calculation saving/ROI, maintain tracking for the project</li><li>achievement and reporting out.</li><li>Implement company OA (Operation Excellence) deployment plans as following; business unit/plant strategic and operational plan.</li><li>Lead in OEE and Change over improvement, collect relevant data, identify potential causes with manufacturing team, analysis and driving improvement solution.</li><li>Implement continuous improvement throughout the organization using Lean and Six Sigma principles and eliminate waste in all areas throughout the manufacturing areas.&nbsp;</li><li>Lead problem-solving through Lean - Six Sigma, root cause analysis and verify that permanent corrective actions are implemented.</li><li>Implement new technology/processes to drive continuous improvement through company Best, COE (Center of Excellence).</li><li>Support plant in achieving their continuous improvement goals; cost-saving and SQCDP.</li><li>Support for digital transformation and digital engineering to implement new digital solution to shopfloor area.</li><li>Initiate actions to prevent the occurrence of any nonconformance relating to product, process &amp; systems.&nbsp;</li><li>Engage the Manufacturing team in the continuous improvement process to ensure that projects are identified, prioritized, and implemented in a timely and effective manner.</li><li>Initiate, recommend or provide solutions through appropriate channels and verify implementation.</li><li>Stimulate management thinking by proposing new ways of doing things.&nbsp;</li><li>Challenge conventional wisdom by demonstrating successful application of new methodologies, seeking out and piloting new tools, and creating innovative thinking.&nbsp;</li><li>Document all activities as required.</li><li>Comply with company procedure and environmental and safety regulation.</li><li>Perform other tasks as assigned by supervisor / Manager.</li></ul> Requirements: <ul><li>Bachelor of Degree in Industrial Engineering or any related field.&nbsp;</li><li>3-5 years relevant working experience in a Continuous Improvement, Industrial Engineer, Operation Excellence and Manufacturing environment.</li><li>Lean Manufacturing methodologies and Six Sigma Problem Solving experience preferred.</li><li>Have experience in project management.</li><li>Have experience in industrial digital transformation.</li><li>Knowledge of Assembly process is advantage.</li><li>Excellent problem-solving technique; Lean and Six Sigma.</li><li>Proficient computer skills and knowledge of Microsoft Office: Word Excel, Project and Minitab, SolidWorks or AUTOCAD, Visio.</li><li>Knowledge in GD&amp;T/SPC/FMEA/DOE.</li><li>Good mechanical / technical skills.&nbsp;</li><li>Good Project Management skill and effective in report writing.</li><li>Able to prepare and present technical knowledge.</li><li>Good attitude with growth mindset.</li><li>Able to work under pressure.</li></ul>

Responsibilities: <ul><li>Non-standard automatic equipment design and development, execute machine mechanism detail design and drawing, build, and execute automation design standard.</li><li>Handle machine or auto assembly line establish by external automation suppliers.</li><li>Platforming manufacturing process development.</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul>&nbsp;Requirements: <ul><li>Bachelor or above degree in mechanical engineering or related background.</li><li>5+ years automation design/development knowledge / experience. Can complete machine mechanism design independently.</li><li>Familiar with mechanical, pneumatic, servo component selection; Understand machining principle of precision parts well.</li><li>Familiar with Creo or SolidWorks or AutoCAD design software</li><li>Data oriented issue finding and problem-solving skills. Knowledge of quality control and quality issue analysis and improvement</li><li>Fluent in using of basic process development related tools like DFM, PFMEA，DOE，FAA, CTAR</li><li>Good logical thinking, teamwork, and innovation consciousness; powerful sense of responsibility。</li><li>Fluent in written and Spoken English.</li><li>Oversea working experience is a plus.</li></ul>

Responsibilities:&nbsp;<ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles</li><li>Establishing signal integrity design performance/functional requirements for new products by closely engaging with front teams / lead customers&nbsp;</li><li>Performing signal integrity simulations for multiple high-speed standards on each product. This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.</li><li>Driving product development for business success</li><li>Engaging in innovative simulation and test tool improvement and process enhancement</li><li>Driving best practices and efficiency in connector design and component qualifications from a signal integrity standpoint.</li><li>Being a mentor and teacher to other engineers across disciplines / BUs, writes and presents technical papers at internal and external conferences.</li><li>Being an expert in analyzing competitive products and driving internal &amp; competing IP positions</li></ul> Requirements:&nbsp;<ul><li>Bachelor’s degree in Electrical Engineering; Masters Degree preferred</li><li>Minimum of 10 years of relevant work experience in electrical Design, RF design or PCB design</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior</li><li>Expert with Signal integrity analysis tools (Agilent ADS, Ansys HFSS, CST, or equivalent tools)</li><li>Expert with 3D CAD tools (SpaceClaim preferred, AutoCAD, Creo, or equivalent)</li><li>Expert with high-speed test equipment (VNA, TDR, BERT)</li><li>Expert with interconnect design or electronic packaging, with a preferred focus on high-speed differential connectors and/or cable assemblies, RF connectors, and channel integration.</li><li>Expert with printed circuit board layout and design (Altium preferred), fabrication and assembly, especially as associated with connector FP and card-edge interfaces</li><li>Proficient with data analysis techniques, appreciation for design geometry tolerance impacts, and HVM qualification.</li><li>Experience with physical layer communications systems and architectures.</li><li>Fluent in English (both verbal and written)</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Expert in analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.</li><li>Learning Capability: Open minded, coachable, willing to learn new skills, and motivated to grow</li><li>Pro-active in identifying complex situations, providing solutions, and driving improvements to evolving procedures</li><li>Experience writing technical papers and presenting to BU-level organizations, external conferences, and critical customer contacts</li><li>Proficient at owning project SI responsibilities and driving team actions across multi-discipline engineering &amp; manufacturing teams</li></ul>&nbsp;Nice to Have Skills/Experience: <ul><li>&nbsp;Experience with interconnect design, including socket/connector/cable/cable assembly design (high-speed twinax cables, direct attach copper (DAC) cables), and/or RF antenna, RF sub-system</li><li>Design experience with communication systems (high-speed servers, switches, routers, storage, antennas, RF front end or similar systems)</li><li>Solid presentation skills with an ability to clearly communicate technical concepts to diverse audiences in English</li><li>Strong organizational and time management skills with an ability to manage and execute multiple tasks/deadlines/projects simultaneously with limited direction.</li><li>Six Sigma methodologies or other strong data analytics background.</li><li>Printed circuit board design, fabrication and assembly (Altium, AutoCAD)</li><li>Experience in project leadership, especially as it applies across design, development &amp; manufacturing teams</li><li>Test equipment (oscilloscope, vector network analyzer, BERT)</li><li>Signal conditioning techniques (equalization, amplification)</li><li>Direct customer design and support experience</li><li>Application and test knowledge of high-speed devices and equalization techniques</li></ul>

Responsibilities:Design & Development of Electrical Drawings –SLD’s, wiring diagrams, cable routing layouts, lighting & earthing layouts etc. based on Scope & inputs provided.Design & development of I/O list, instrument loop diagrams, instrument location layouts, JB connection diagrams & PLC enclosure layouts etc.Collaborate with inter disciplines to get the required inputs to update the drawings.Ensure quality of the drawings as per Standards.Requirements:Candidate with 4-6 years’ experience in electrical design & detail engineering in Oil & gas/Chemical/refinery industry.Expertise in AutoCAD/MicroStation tool Hands on experience in designing the electrical and instrumentation drawings like single line diagrams, schematic diagrams, GA’s, Panel drawings, cable routing drawings, loop diagrams & connection diagrams etc. Familiar with electrical design calculations (Cable& conduit sizing, Transformer sizing, lighting calculations, earthing etc.) Able to manage multiple projects at the same time.Good at communication skills.Ability to work collaboratively in a team environment

Responsibilities:Renewables Department is seeking for a Renewables Power Engineering Specialist, with skills and competency to support the evaluation and development of renewables business cases and capital projects. Specific functions of the position are as follows:Develops long term master plans to develop new cost effective and innovative design strategies and solutions in different operating areas ofto meet sustainability goals.Conducts economic analysis and thoroughly evaluate different project alternatives to recommend best investment decisions with maximum attainable Net Present Value (NPV) for renewable systems.Examines technical studies to align with project proposal procedures. Such studies include equipment reliability, condition assessment, obsolescence, standard compliance, etc.Works with multidisciplinary internal and external organizations to provide technical guidance and recommendations on design details and construction documents as necessaryPerforms in solar resource data analysis for feasibility studies and system design (PR, Yield, Availability, Production etc.).Conducts site visits to perform for feasibility study including load profiling studies using power analyzerPerforms complex power and energy flow simulations to provide cost effective optimum Solar PV and energy storage systems size using load profile studies and operational constraints Responsible for understanding the operational requirement, conducting site visits, site feasibility & Renewables systems design and complete execution.Provides technical studies and guidance on energy storage technologies in terms cost, reliability, applicability, efficiency. Supports project development team to prepare technical scope of work, cost estimationReviews technical proposals, submittals and packages in line with international and  standardsDesigns both grid interactive or standalone PV systems for industrial applications with different installation configurations (rooftop and ground mounted) including balance of systems design calculations, layouts and schematic diagrams.Provides economic analysis (LCOE, NPV) and recommend best investment decisions with maximum attainable Net Present Value (NPV).Promotes a learning environment and continuous development. Acts as a mentor to junior engineers.Conducts seminars, presents case studies, and writes papers for peer-reviewed journals on engineering studies and projects he/she has overseen.The candidate will provide Technical evaluation for new energy startups, investment ideas and Pilot Projects. The candidate will Support the Company’s technology and energy ventures investment decisions inputs.Develops and maintains  Engineering Standards and Design Best Practices, Design Manuals or other documentation to enhance company profitability and productivity.Requirements:Bachelor's Degree in Electrical Engineering or Renewables Engineering. Master's Degree in Engineering is a preference.Five (5) to Ten (10) years’ engineering design experience in Solar PV, Concentrated solar and Energy storage (heat and chemical storage technologies).CEM certification is a plusStrong technical experience in Solar PV and Energy storage technologies (Flow batteries, Lithium batteries), system design, optimization, technology assessment and techno-economic feasibility studies, grid interconnection and reliability or distribution either with utility or end-users.Solar PV experience including plant design, installation and commissioning, system interconnection, codes and standards.Computerized Solar PV Systems analysis tools experience such as PVsyst, HOMER, AutoCAD, PVGIS tools, power analyzer/logger, IV curve tracing and battery testerExcellent command of spoken and written English.Excellent presentation and communication skillsAbility to work well within team environmentGreen Hydrogen, Fuel cells and Wind energy experience is a plus

Responsibilities:The Validation Engineer works alone and as part of the Engineering Department to author and execute IQ/OQ/PQ protocols, engineering studies, facility qualifications and other documents related to production and business systems.They will also be responsible for engineering and maintenance projects, such as repairs, upgrades or replacements as the need arises.They will work with quality, technical operations and production to identify and resolve issues. Adhere to all company and cGMP procedures as well as applicable safety regulations.Author change controls, SOPs and protocols.Protocols o Generates and executes validation protocols, and summarizes studies to ensure compliance with manufacturer and SPI specifications, with current Good Manufacturing Practices, and national standards.Responsible for confirming all communicated validation plans to applicable management.Provides technical assistance in the form of rationales or validation studies.Responsible for effectively adopting modern validation techniques, current industry practices, risk management principles, science-based approaches and a strong understanding of processes and equipment.Troubleshoots and resolves issues as needed.Manage multiple projects with competing deadlines.Manage external resources to complete tasks outside SPI’s capabilities. Manage approvers of documents and procedures and ensure timely closure of tasks.Manage project-related Change Requests form initiation through closure, including presentation to Change Control Committee.Assist with deviation investigation and identify areas for CAPAs as needed based on root causes.Source and procure equipment, supplies and other materials as needed.Develop and maintain cross-functional relationships. Requirements:Bachelor of Science in Engineering or Science discipline preferred.Experience in pharmaceutical (i.e. Validation/QA or R&D), medical device, biotechnology industries.In-depth knowledge of the pharmaceutical plant operations is an asset.Proficient in Microsoft Word, Excel, Power Point, Project, AutoCAD and other software relevant to the performance of the JobExperience authoring change controls in Trackwise or other management system.Experience authoring SOPs in MasterControl or other management system.Integrity – Works with integrity and ethically; Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.Collaboration – Works well in group problem solving situations; Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions. People – Treats people with respect; Keeps commitments; inspires the trust of others; Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; promotes a harassment-free environment.Responsive – Identifies and adapts to priority issues as they arise; Communicates with management and team members effectively; Works quickly and efficiently.Proactive – Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions.Organized – Tracks deadlines and adheres to schedules; Writes clearly and informatively; Presents numerical data effectively.Learning Mindset – Adapts to unfamiliar situations as needed; Open to new ideas and methods; Readily familiarizes self with new equipment and processes.Regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 50 pounds.Climb ladders and work in high, precarious places up to elevations of 75 feet.Regularly exposed to work near moving mechanical parts.Exposed to wet or humid conditions.Exposed to outdoor weather conditions.Regularly exposed to high noise environments.Exposed to extremely dusty environments.Exposed to chemicals used in the manufacturing process.

Skills

Industry

Location

Jobtitle

6 autocad Jobs found

Continuous Improvement Analyst

Sr Manufacturing Process and Development Engineer (Automation)

Principal R&D/Product DVL Engineer

Electrical Design Engineer

Sr. Engineer (New Energy)

Validation Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

6 autocad Jobs found

Continuous Improvement Analyst

Sr Manufacturing Process and Development Engineer (Automation)

Principal R&D/Product DVL Engineer

Electrical Design Engineer

Sr. Engineer (New Energy)

Validation Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.