Process Engineering -SAGO

Chemical Engineer – Relief Systems Process Safety

Process Engineering

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (10) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:Evaluate, design and document vessels for potential over pressure and vacuum scenarios (new & existing) – relief device (PSV, RD, conservation vents) relief load calculation, inlet and outlet line sizing, size selection and datasheet preparation, and relief/flare load summary preparation. Design, model, document, and communicate requirements for pressure/vacuum relief devices and effluent handling.Understanding of mechanical design conditions and to utilize the process safety information in designing relief system to safeguard piping and equipment.Understanding of HAZOP, PHA report, SIL studies - provide relief system input from these reports. Design of overpressure protection for gas/vapor filled systems using Depressurization concept. Material & Energy Balance Calculation as per the process requirement to design the adequate relief systems.Work to enhance safety and protection of the environment through overall relief project development.Stay abreast of corporate and industry relief practices and standards such as API 520/521, NFPA 30, API 2000 etcRequirements:3 to 8 years of direct Relief Systems experience in process design, commissioning, start-up, or operations.Demonstrated project management skills. Proficiency with Microsoft Office programsPrefer knowledge in application and compliance requirements of regulatory codes: US Occupational Health and Safety Administration, Internal Process Safety StandardsExperience in a petrochemical plant or refinery Experience with the following software would be an advantage: SuperChems, ASPEN, HTRI, AFT ARROW, AFT Fathom.Addition Required Qualifications/Job Requirements:Master’s or bachelor’s degree in chemical engineering from accredited university or college.Understand process flow diagrams, piping and instrumentation diagram and equipment layouts, conceptual equipment layouts, process layout, utility layout and other block layouts.Understand Plant process design with equipment sizing & utility load design calculation. Must have strong interpersonal, communication, collaboration, and consultation skills. This position will interact with personnel in all organizations.Ability to organize, prioritize, and execute a heavy workload simultaneously within budget and schedule.Must have the ability to communicate effectively through verbal and written means, and able to adapt communication to best reach the intended audience within or outside the organization.Strong customer focus, with demonstrated ability to solve complex issues and work in partnership with peers, Manufacturing, and other stakeholders.Ability to compile and analyze complex data.Knowledge in application of industry standards, recommended practices, and codes (API, NFPA, ASME, etc.)Ensure regulatory compliance of process changes- Provide and communicate clear, concise, and timely reporting of project progress and accomplishments verbally and in writing. 

Responsibilities:You will be required to perform the following:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilities.Develop, review and/or validate plant mass balances.Check plant performance to ensure it is running up to its design.Look for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation.Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing procedures.Conduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance test.Evaluate the catalyst recovery performance.Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses.Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation.Lead process and equipment optimization studies.Lead feasibility studies.Lead PHA and HAZOP studiesInitiate and coordinate ESA's.Develop implementation plan for critical recommendations.Ensure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studies.Lead Energy Optimization / Conservation studies.Initiate process safety relief audit studies.Lead Water conservation studies.perform management of change (MOC).verify system operations and performance after implementing the recommendations.Requirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Skills

Industry

Location

Jobtitle

4 aspen hysys Jobs found

Process Engineering -SAGO

Chemical Engineer – Relief Systems Process Safety

Process Engineering

Process Engineering

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

4 aspen hysys Jobs found

Process Engineering -SAGO

Chemical Engineer – Relief Systems Process Safety

Process Engineering

Process Engineering

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.