Operations Supervisor

Facilities Security Manager

Process Quality Manager

Staff New Product Development Engineer

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Staff Manufacturing & Process Development Engineer – Molding

Quality Control Supervisor

Senior Quality Engineer

Role Description: <ul><li>Job Summary The Operations Supervisor is responsible for overseeing solid dosage pharmaceutical manufacturing and packaging activities during 2nd shift operations, 3:15pm to 11:45pm.&nbsp;</li><li>This role ensures that all production operations comply with cGMP, safety standards, and production schedules.</li><li>The operations supervisor will lead and support a team of leads and operators ensuring high quality output, operational efficiency, and a safe working environment.</li><li>Scope of Authority - span of control (work unit, site, department, division, etc.), monetary value of budget/spend authority ( capital, operating, etc.), P&amp;L responsibility, etc.</li><li>Oversees and coordinates Manufacturing and Packaging operations.&nbsp;</li></ul> Responsibilities: Key Accountabilities: <ul><li>Accountability Lead and supervise operations in solid dosage manufacturing and packaging to ensure adherence to Master Formula and Master Packaging Records, SOP’s, and regulatory requirements (FDA, etc.).</li><li>Communicate with department leadership, set the shift schedule, and conduct shift huddle/communication at start of shift to ensure effective communication between shifts.</li><li>Ensure timely execution of production schedules.</li><li>Monitors manufacturing and packaging processes to ensure schedule is met within standards.</li><li>Review and complete shift documentation, including batch documentation, logbooks, etc.</li><li>Coordinate with Engineering and Quality Assurance to address any equipment issues that occur during the shift Support investigations for deviations that occur during the shift.</li><li>Assist in determining and implementing CAPA.</li><li>Provide training, guidance, and performance feedback for shift employees.</li><li>Ensure training requirements are met.</li><li>Support employee development and cross-training.</li><li>Executes procedures to complete tasks in a compliant and safe manner.</li></ul> Continuous Improvement <ul><li>Captures and reports metrics; troubleshoots downtime to increase operational efficiency.</li><li>Lead or participate in Continuous Improvement projects.</li><li>Troubleshoots and resolves process issues.</li></ul> Issues &amp; Deviations <ul><li>Performs defect evaluations and initiates production events.</li><li>Identifies, reports, and suggests resolutions for processing related issues.&nbsp;</li><li>Assists in the investigation of unplanned deviations.</li></ul> Teamwork and Collaboration <ul><li>Provides priorities for the off-shift operations, focusing resources on priority products.</li><li>Interfaces with supervisors and/or Quality personnel to inform of deviations or other line issues.</li><li>Continuous Training Ensures personnel are current with training requirements.</li><li>Stays current on SOPs and cGMPs.</li><li>Continuous Safety &amp; Compliance Contribute to safety audits.</li><li>Ensures out manufacturing/packaging activities safely, as required, on a daily basis.</li><li>Follows all safety and compliance procedures and participates in required training.</li><li>Adheres to all cGMP compliance/regulatory mandates and quality requirements.</li><li>Participate in safety teams, start-up discussions, incident debriefs, etc.</li><li>Ensures compliance with SOPs, Policies and Procedures as required by the Company and regulatory agencies.</li><li>Misc Other related duties as assigned to meet departmental and Company objectives.&nbsp;</li></ul> Requirements: Qualifications Education &amp; Experience: <ul><li>Minimal acceptable level of education, work experience and certifications required for the job Bachelor’s degree in pharmacy, Chemistry, Engineering, or a related discipline preferred, relevant experience my substitute.</li><li>Minimum of 3 years supervisory experience in pharmaceutical solid dosage manufacturing/packaging.&nbsp;</li><li>Knowledge Proficiency in a body of information required for the job e.g.</li><li>Knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc.</li><li>Thorough knowledge of cGMP and FDA regulations.</li><li>Thorough knowledge of manufacturing and packaging operations.&nbsp;</li></ul> Skills &amp; Abilities: <ul><li>Often referred to as “competencies”, leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc.</li><li>Demonstrated leadership, communication, and decision-making skills.</li><li>Ability to oversee and manage the daily operations of manufacturing and packaging. Ability to monitors processes to ensure schedule is met within standards.</li><li>Ability to analyze metrics and troubleshoot downtime.&nbsp;</li><li>Effectively interfaces with Quality Assurance to inform of deviations or other line issues.</li><li>Demonstrates the ability to work in collaboration with others as a part of a team.</li><li>Ability to lead in Continuous Improvement projects.</li><li>Possess technical writing skills.&nbsp;</li><li>Physical Requirements Physical &amp; mental requirements e.g. lift 40 pounds, walk across plant/warehouse, business travel (% of time), driving as part of work responsibilities, etc.</li><li>Must be able to stand for long periods of time (8- or 12-hour shifts), lift at least 35 pounds, climb ladders, wear a dust mask or respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes.</li><li>Lead and supervise operations in solid dosage manufacturing and packaging to ensure adherence to Master Formula and Master Packaging Records, SOP’s, and regulatory requirements (FDA, etc.).</li><li>Communicate with department leadership, set the shift schedule, and conduct shift huddle/communication at start of shift to ensure effective communication between shifts.</li><li>Ensure timely execution of production schedules.</li><li>Monitors manufacturing and packaging processes to ensure schedule is met within standards.</li><li>Review and complete shift documentation, including batch documentation, logbooks, etc.</li><li>Coordinate with Engineering and Quality Assurance to address any equipment issues that occur during the shift Support investigations for deviations that occur during the shift.</li><li>Assist in determining and implementing CAPA.</li><li>Provide training, guidance, and performance feedback for shift employees.</li><li>Ensure training requirements are met.</li><li>Support employee development and cross-training.</li><li>Executes procedures to complete tasks in a compliant and safe manner.</li></ul>

Responsibilities: <ul><li>Work with stakeholders to help develop a culture of proactive security &amp; resiliency risk management across all company Philippines operations.</li><li>Proactively drive a metrics-based security risk management program throughout Philippines operations.</li><li>Collaborate with Global Trade Services, Global Logistics, EH&amp;S, IT, and regional team members at facilities to maintain appropriate security, crisis management, and business continuity requirements.&nbsp;</li><li>Lead security training and awareness efforts to protect personnel, operations and assets against security related risks.</li><li>Manage and maintain the Philippines supply chain security programs in which company currently benefits from or can participate in the future (e.g. C-TPAT or other similar programs).</li><li>Work with the Facilities &amp; company IS (company Information Solutions department responsible for IT systems) management team to drive performance improvements across existing</li><li>security programs (e.g. contract uniform security service providers, physical security systems, and supply chain service providers).</li><li>Identify improvement opportunities, communicate findings with the leadership team, and implement changes after receiving approvals.</li><li>Conduct investigations into allegations or suspicious activity under the direction and scope of the ERSM department.&nbsp;</li><li>Coordinate executive protection, special event, and travel security efforts in Philippines.</li><li>Liaise with local, regional, and national law enforcement.&nbsp;</li><li>Project manage special projects and coordinate awareness resources when required.</li><li>Ability to travel globally (estimated 20%) domestic &amp; some international.</li></ul> Requirements: <ul><li>7 years of confirmed experience in security and/or security risk management, with leadership/supervisory experience in the areas of programs, guard operations, and physical security.</li><li>Candidates with experience setting up and managing security systems and procedures at electronics manufacturing sites belonging to multinational corporations would be preferred.</li><li>Proven ability to proactively implement data-driven security risk management programs.&nbsp;</li><li>Knowledge of physical security systems, including design, operation and maintenance.&nbsp;</li><li>Experience developing procedural documents.</li><li>Knowledge and understanding of supply chain security methodology including requirements with the CTPAT program.</li><li>Demonstrated experience in crisis management and business continuity.&nbsp;</li><li>Experience and training in conducting investigations.</li><li>Ability to conduct training on various risk and security related topics</li></ul>

Responsibilities: Goal Setting <ul><li>Production area Key performance setting base on Quality strategy</li><li>To let each engineer clear understand own KPI and dedicate to quality improvement toward to corporate strategy</li></ul> Customer Complaint handling <ul><li>Review 8D report, monitor customer complaint quantity, response time, 8D score, and improvement effectiveness.</li><li>To improve customer satisfaction and compliance the strategy to ECE</li></ul> COPQ Reduction <ul><li>Direct and support to analysis the production data, find the quality improvement opportunity and lead team to determine the actions, follow up and verify the improvement result, take</li><li>reaction base on the actual result.</li><li>To control scrap cost and continue improvement process quality to contribute cost saving.</li></ul> CIP <ul><li>Review historical data to identify CIP projects, and follow up the progress.</li><li>To continual reduce COPQ and prevent customer complaint as well as efficiency improvement.</li></ul> Audit supports <ul><li>Coordinate and support external and internal audits, communicate about audit findings and lead the corrective actions where appropriate to ensure that audits are completed in a timely</li><li>manner</li></ul> People Management <ul><li>Allocate work across direct reports; monitor and review their performance; mentor, coach and motivate them; and help resolve people/functional issues to achieve the targeted team</li><li>performance and retain talent</li></ul> Lesson learn <ul><li>Share experience with team to prevent potential quality risk.</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or above in Mechanical, Electronics or relevant&nbsp;</li></ul> Qualification &amp; Certification: <ul><li>APQP, PPAP, FMEA, SPC, MSA certification;</li></ul> Experience: <ul><li>More than 5 years of working experience in quality process management, Automotive experience must be.&nbsp;</li></ul> Technical Skill &amp; Competencies: <ul><li>Master APQP, PPAP, FMEA, SPC, MSA,8D.&nbsp;</li><li>Process audit and product audit skills</li><li>Familiar with ISO9001, IATF16949</li><li>Familiar with 8D method</li><li>Familiar with special characteristic symbol requirements</li><li>Proficient in written and oral English</li><li>Good communication skill, integrity, accountability, logical, self-motivated, ability to work under pressure</li><li>Good interpersonal skill</li></ul>

Role Objective: <ul><li>Responsible for Power Solution product development, which is majorly used for data communication or Hyperscale computers.&nbsp;</li><li>Provide customer innovation solutions as well as manage the engineer documents following our clients system procedure.</li></ul> Responsibilities: <ul><li>Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications.</li><li>Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer.</li><li>Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Develop and manage product documentation, including product requirements, design documents, and test plans/reports.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all technical, quality, and cost objectives.</li><li>Work closely with suppliers to identify and qualify new components and technologies.</li><li>Conduct thorough design verification and validation testing to ensure the product meets the required specifications.</li><li>Collaborate with manufacturing teams to ensure a smooth transition to production.</li><li>Mentor and guide junior engineers and technicians to develop their skills and knowledge.</li><li>Conduct competitive analysis and market research to identify opportunities for innovation and differentiation.</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams.</li><li>Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers’ expectations.&nbsp;</li><li>Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification.&nbsp;</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our Global competency centers to enhance business revenue &amp; growth.&nbsp;</li><li>Apply engineering best practices to reduce cost and sustain existing products to meet customer’s cost targets.</li></ul> Requirements: Education/Knowledge: <ul><li>Bachelors or Masters degree in Mechanical or Electrical Engineering.</li><li>Strong understanding of mechanical and electrical engineering principles.</li><li>Experience with product development processes, including design, prototyping, and testing.</li><li>Strong problem-solving skills and ability to work independently or as part of a team.</li><li>Excellent written and verbal communication skills.</li><li>Experience with data center technology and connectors/cable assembly is a plus.</li><li>Project management skills and ability to manage multiple projects simultaneously.</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modeling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design, and Simulation</li><li>Knowledge of manufacturing process (machining, molding, stamping, plating, etc.)</li><li>Knowledge of material (metal/plastic) properties will be a plus.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li></ul> Critical Experience: <ul><li>Minimum of 10 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related.</li><li>This highly technical position requires an individual who can work independently.</li><li>Experience in product compliance certification ( Product, Safety, Environmental substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM).</li><li>Capability and experience in presentation on products, solutions, and technologies.</li><li>Previous experience in working in high-performing multi-disciplinary global engineering teams.</li></ul> Competencies: <ul><li>Technical capabilities: Expert functional/domain knowledge</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross-functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with the global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Building people capability: Training and mentoring engineers with the necessary skill set, assuring succession &amp; workforce planning &amp; organizational capability</li><li>Quality controller: Ability to assure quality for services, labels &amp; labs</li></ul> Motivational/Cultural Fit: <ul><li>Passion for technology</li><li>Talent development</li><li>Good communication skills and proactively communicate with team members and Customers</li><li>Effective planning &amp; Prioritization</li><li>Problem solving and Results driven</li></ul>

Responsibilities: Quality Documents Preparation and Revise. DQIP Workmanship Control Plan: <ul><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li></ul> Setup &amp; FAAR: <ul><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li></ul> MSA (GRR), gage: <ul><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. </li><li>Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li></ul> PFMEA: <ul><li>Assure the process risk control basing on efficient PFMEA.</li></ul> NCR &amp; QA instruction: <ul><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non-confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D report prepare and TECHS system handling.</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures.</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results.</li></ul> Training: <ul><li>Providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Bachelor’s degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>SA、SPC、FACA, Familiar with quality management tools, such as MSA, SPC, FACA etc</li><li>Personal Attributes &amp; Competencies</li><li>Integrity; Accountability; Communication; Outgoing.</li><li>Good capability of logical thinking, self-study and independent problem solving</li></ul>

Responsibilities: <ul><li>Has strong impact in Advanced Manufacturing Technology Roadmap driven development projects.</li><li>Drives for excellence in existing Stamping technologies and methods.</li><li>Strives to implement optimized or new manufacturing technologies to provide improved processes and tolerance control.</li><li>Act as a liaison between the Advance Manufacturing Process team and the manufacturing sites teams to collaborate with Product Development in the optimization of part and product</li><li>Designs for manufacturability, providing stamping process expert knowledge and general knowledge of stamping processes to realize product samples and prototypes.</li><li>Provides stamping process expert knowledge and general knowledge and project management to liaise the Advance Manufacturing Process team and the manufacturing sites teams,</li><li>deploying optimized or new stamping processes to realize advanced manufacturing technology development projects.</li><li>Acts as the binding element between product development and advanced manufacturing &amp; process engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Designs, develops, and qualifies stamping processes in compliance with company EH&amp;S, quality and production standards, as well as recognized best in class and industry standards.</li><li>Documents all related processes in applicable company systems.</li><li>Supports supply chain to verify related suppliers’ compliance and capability.</li><li>Initiates and implements stamping related programs to continuously improve quality, cost and cycle time.</li><li>Maintains and adheres to all appropriate specifications, regulatory and customer requirements.</li><li>Applies stamping process expertise to resolve significant / unique / complex issues, where analysis of situations or data requires an in-depth evaluation of variable factors.</li><li>Exercises considerable latitude in determining objectives and approaches to assignment, performing work without appreciable direction.</li><li>Drives results primarily through collaboration and influence, not through direct reporting relationships.</li><li>Provides training and mentorship to other professional employees.</li><li>Provides measurable input to the objectives and goals of the department in support of the function and business unit strategies.</li></ul> Requirements: <ul><li>Minimum 8 years of related experience.</li><li>Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.</li><li>Demonstrates stamping process expertise (process optimization, capability, troubleshooting)</li><li>Tight tolerance electrical connector experience is a plus!</li><li>Working knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!</li><li>Fluent in English (read, write, and speak).</li><li>Broad knowledge of stamping, plating, and assembly processes for connectors and sockets is desired.</li><li>Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;</li><li>Broad project management skill and experience – Ability to work on several projects at once.</li><li>Based in China-Qingdao or the Philippines-Batangas mfg. sites and willingness to travel up to 25% average.</li></ul>

Responsibilities:•	Has strong impact in Advanced Manufacturing Technology Roadmap driven development projects.•	Drives for excellence in existing Stamping technologies and methods.•	Strives to implement optimized or new manufacturing technologies to provide improved processes and tolerance control.•	Act as a liaison between the Advance Manufacturing Process team and the manufacturing sites teams to collaborate with Product Development in the optimization of part and product designs for manufacturability, providing stamping process expert knowledge and general knowledge of stamping processes to realize product samples and prototypes.•	Provides stamping process expert knowledge and general knowledge and project management to liaise the Advance Manufacturing Process team and the manufacturing sites teams, deploying optimized or new stamping processes to realize advanced manufacturing technology development projects.•	Acts as the binding element between product development and advanced manufacturing &amp; process engineering, ensuring the effectiveness and efficiency of this critical interface.•	Designs, develops, and qualifies stamping processes in compliance with company EH&amp;S, quality and production standards, as well as recognized best in class and industry standards.•	Documents all related processes in applicable company systems.•	Supports supply chain to verify related suppliers’ compliance and capability.•	Initiates and implements stamping related programs to continuously improve quality, cost and cycle time.•	Maintains and adheres to all appropriate specifications, regulatory and customer requirements.•	Applies stamping process expertise to resolve significant / unique / complex issues, where analysis of situations or data requires an in-depth evaluation of variable factors.•	Exercises considerable latitude in determining objectives and approaches to assignment, performing work without appreciable direction.•	Drives results primarily through collaboration and influence, not through direct reporting relationships.•	Provides training and mentorship to other professional employees.•	Provides measurable input to the objectives and goals of the department in support of the function and business unit strategies. Requirements:•	Minimum 8 years of related experience.•	Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.•	Demonstrates stamping process expertise (process optimization, capability, troubleshooting)•	Tight tolerance electrical connector experience is a plus!•	Working knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!•	Fluent in English (read, write, and speak).•	Broad knowledge of stamping, plating, and assembly processes for connectors and sockets is desired.•	Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;•	Broad project management skill and experience – Ability to work on several projects at once.•	Based in China-Qingdao or the Philippines-Batangas mfg. sites and willingness to travel up to 25% average.

Role Description: <ul><li>A concise overview of the job The Supervisor, Quality Control is responsible for overseeing the day-to-day operations of the QC raw material testing group.</li><li>Supervision and enforcing cGMP’s, GLP’s, conducting investigations, method transfers, verifications of compendia methods and training of new employees.</li><li>All incumbents are responsible for following applicable Division &amp; Company policies and procedures.</li><li>Scope of Authority - span of control (work unit, site, department, division, etc.), monetary value of budget/spend authority (capital, operating, etc.), P&amp;L responsibility, etc.</li><li>Supervisory responsibilities within a single site.</li></ul> Responsibilities: <ul><li>QC Lab Management- Supervise day-to-day operations of QC Laboratory to ensure that cGMP’s, GLP’s and all other applicable compendial requirements are met.</li><li>Ensure that the testing is done as per the approved monograph procedures, investigate and take corrective actions, document investigation findings and coordinate the approval process of investigations.</li><li>Interact with Planning, Purchasing, Supply Chain, Production, QA for timely release of raw materials, excipient and packaging components.</li><li>Coordinate Analytical Methods Transfer projects. Identify and implement procedures to reduce cost of goods.</li><li>Develop systems and processes for proactive management of laboratory logistics and instrumentation.</li><li>Oversee ordering of lab supplies in observance of Departmental Budget constraints.</li><li>Workload Management- Coordinate workload sharing with other groups in QC and develop action plans to improve the working environment and for maximization of laboratory efficiency.</li><li>Prepare monthly report of the issues, work done, any employee related issues and conduct bi-weekly audits of the analyst’s notebooks.</li><li>SOPs - Review/update SOP’s, procedures and monographs for the QC Group as needed.</li><li>Review and comment on the articles affecting QC in the USP Supplements and Pharmacopeial Forums.</li><li>Conduct periodic audits of the analyst notebooks and instrument logbooks to ensure compliance of cGMP’s.</li><li>Staff Development-Evaluate potential candidates for QC; performance evaluation of direct reports.</li><li>Provide training in all procedures/instrumentation/techniques, including but not limited to HPLC, UV-Vis, IR, and Raw Material, Finished Product, Stability testing. 15% Total	100% Qualifications&nbsp;</li></ul> Requirements: Education &amp; Experience <ul><li>Minimal acceptable level of education, work experience and certifications required for the job</li><li>BS in chemistry or related discipline with 10+ years’ experience in pharmaceutical testing OR MS in Chemistry or related discipline with 7+ years’ experience in pharmaceutical testing.</li><li>3+ years’ QC lab supervisory experience in pharmaceutical industry.</li><li>Demonstrated management and leadership experience with strong interpersonal and influencing skills.</li></ul> Knowledge&nbsp; <ul><li>Proficiency in a body of information required for the job e.g. knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc.</li><li>Expert knowledge of applicable safety and standards guidelines, such as SOP, cGMP, GLP, DEA regulations and/or SDS.</li><li>Strong knowledge and proficiency required with laboratory techniques/instruments, such as HPLC, GC, analytical balance, pipette, burette, oven, UV-vis spectrophotometer, dissolution tester, pH meter, etc.</li><li>Strong knowledge and proficiency preferred with Empower, Track Wise and Labware LIMS.</li></ul> Skills &amp; Abilities	 <ul><li>Often referred to as “competencies”, leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc.</li><li>Organizational Support- Follows policies and procedures; completes administrative tasks correctly and on time; supports organizations goals and values; benefits organization through outside activities; supports affirmative action and respects diversity.</li><li>Leadership - Exhibits confidence in self and others; inspires and motivates others to perform well; effectively influences actions and opinions of others; accepts feedback from others; gives appropriate recognition to others.</li><li>Supervising People- Includes staff in planning, decision-making, facilitating and process improvement; takes responsibility for subordinates activities; is available to staff; provides regular performance feedback; develops subordinates skills and encourages growth; solicits and applies customer feedback (internal and external); fosters quality focus in others; improves processes, products and services.; continually works to improve supervisory skills.</li><li>Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality.</li><li>Demonstrated flexibility in carrying out varied assignments in a high-quality work environment.</li><li>Excellent written and oral communications skills with a strong emphasis on organizational capabilities.</li></ul> Physical Requirements	 <ul><li>Physical &amp; mental requirements e.g. lift 40 pounds, walk across plant/warehouse, business travel (% of time), driving as part of work responsibilities, etc.</li><li>Employee is frequently required to use hands to handle or feel.</li><li>The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and color vision.</li><li>The noise level in the work environment is usually moderate.</li><li>The work environment is representative of a group laboratory environment.</li><li>QC Lab Management, Workload Management, SOPs, Staff Development</li></ul>

Responsibilities: <ul><li>Develop and implement quality standards to meet Quality Management System to assure products meet or exceed customer expectations.</li><li>Lead cross-functional problem-solving teams; use of QA methodologies to manage and facilitate issue resolution including root cause investigations and the development, implementation and monitoring of effective corrective and preventive actions</li><li>Performs routine supplier and plant audits to ensure product being manufactured meets all requirements.</li><li>Lead cross-functional teams to drive process and product improvements in manufacturing plants and at suppliers.</li><li>Work with Manufacturing, Engineering, and PM to determine product specifications and tolerances.</li><li>Participates in various NPI projects to ensure quality is incorporated into product designs and be responsible for preparing all quality-related documentation.</li><li>Support the development of FMEAs, Control Plans, Test and Inspection Plans.</li><li>Establish and maintain control plans to assure critical features are controlled through manufacturing processes.</li><li>Reviews and integrates contractual requirements into all aspects of proposals and program processes and documentation.</li><li>Conducts capability assessments and process validations to support supplier selection activities.</li><li>Provides material review dispositions for non-conforming materials or products.</li><li>Plan, execute, and oversee inspection and testing of products to verify conformance with specifications and deliverables.</li><li>Update company complaint handling system to ensure capture, investigation, and proper documentation of all customer complaints.</li><li>Manage documents related to ISO certification, procedures, standards, customer change requests, ECN, PCN, and/or Work Instructions.</li></ul> Requirements: <ul><li>Bachelor’s degree, Engineering or related technical discipline.</li><li>8+ years’ experience in Quality Engineer role in a production environment.</li><li>Familiarity with ISO 9001, AS9100 or ISO/TS 16949 QMS standards.</li><li>Experience in reading blueprints and have basic understanding of GD&amp;T fundamentals.</li><li>Experience effectively utilizing statistical methods and statistical analysis tools.</li><li>Experience with APQP, PPAP, FMEA, Control Plans, and various problem solving tools.</li><li>Experience in statistical tools and disciplined problem-solving methodologies such as 8D, A3, DMAIC, Fishbone,5-Whys, 6Ms.</li><li>Self-motivated, proactive and efficient team player who thrives in a fast-paced environment.</li><li>Able to travel 20% - 30% domestically and 10% internationally.</li><li>Must be eligible to work in the US with no sponsorship now or in the future.</li><li>Technical understanding of electrical power systems and electrical power distribution/circuit protection products.</li><li>Six Sigma Green, Black Belt, or comparable certification, preferred.</li><li>Excellent communication skills written, verbal, and presentation skills with effective technical writing skills, ability to speak Spanish is a plus.</li><li>High-energy, results-oriented, self-reliant, team player who can positively collaborate across different business departments and cultures.</li><li>Advanced knowledge of Microsoft Office (Word, Excel, PowerPoint, Outlook)</li><li>Experience in the electrical-mechanical manufacturing or solar industry.</li><li>Experience in conducting supplier and plant audits.</li><li>Experience in reviewing customer contracts.</li></ul>

Skills

Industry

Location

Jobtitle

17 8d investigations Jobs found

Operations Supervisor

Facilities Security Manager

Process Quality Manager

Staff New Product Development Engineer

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Staff Manufacturing & Process Development Engineer – Molding

Quality Control Supervisor

Senior Quality Engineer

Senior Quality Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

17 8d investigations Jobs found

Operations Supervisor

Facilities Security Manager

Process Quality Manager

Staff New Product Development Engineer

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Staff Manufacturing & Process Development Engineer – Molding

Quality Control Supervisor

Senior Quality Engineer

Senior Quality Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.